Re: [kvm-unit-tests PATCH 3/3] arm: pmu: Add tests for 64-bit overflows

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 14, 2022 at 10:45:07AM +0000, Alexandru Elisei wrote:
> Hi,
> 
> On Tue, Dec 13, 2022 at 10:04:04AM -0800, Ricardo Koller wrote:
> > On Tue, Dec 13, 2022 at 05:03:40PM +0000, Alexandru Elisei wrote:
> > > Hi,
> > > 
> > > Checked that all places where ALL_SET/PRE_OVERFLOW were used are now taking
> > > into account the fact that counters are programmed to be 64bit.
> > > 
> > > In the case of 64bit counters, the printf format specifier is %ld, which
> > > means that ALL_SET_64 and PRE_OVERFLOW_64 are now displayed as negative
> > > numbers. For example:
> > > 
> > > INFO: pmu: pmu-sw-incr: 32-bit: SW_INCR counter #0 has value 4294967280
> > > PASS: pmu: pmu-sw-incr: 32-bit: PWSYNC does not increment if PMCR.E is unset
> > > [..]
> > > INFO: pmu: pmu-sw-incr: 64-bit: SW_INCR counter #0 has value -16
> > > PASS: pmu: pmu-sw-incr: 64-bit: PWSYNC does not increment if PMCR.E is unset
> > > 
> > 
> > Argh, I didn't notice this. I think this would be more useful if it
> > printed %llx in all cases.
> 
> Indeed, printing the hex value will make it easier to match it against the
> defines.
> 
> One more comment below.
> 
> > 
> > > I was thinking that the format specifiers could be changed to unsigned
> > > long.  The counters only increment, they don't decrement, and I can't think
> > > how printing them as signed could be useful.
> > > 
> > > One more comment below.
> > > 
> > > On Fri, Dec 02, 2022 at 04:55:27AM +0000, Ricardo Koller wrote:
> > > > Modify all tests checking overflows to support both 32 (PMCR_EL0.LP == 0)
> > > > and 64-bit overflows (PMCR_EL0.LP == 1). 64-bit overflows are only
> > > > supported on PMUv3p5.
> > > > 
> > > > Note that chained tests do not implement "overflow_at_64bits == true".
> > > > That's because there are no CHAIN events when "PMCR_EL0.LP == 1" (for more
> > > > details see AArch64.IncrementEventCounter() pseudocode in the ARM ARM DDI
> > > > 0487H.a, J1.1.1 "aarch64/debug").
> > > > 
> > > > Signed-off-by: Ricardo Koller <ricarkol@xxxxxxxxxx>
> > > > ---
> > > >  arm/pmu.c | 91 ++++++++++++++++++++++++++++++++++++-------------------
> > > >  1 file changed, 60 insertions(+), 31 deletions(-)
> > > > 
> > > > diff --git a/arm/pmu.c b/arm/pmu.c
> > > > index 59e5bfe..3cb563b 100644
> > > > --- a/arm/pmu.c
> > > > +++ b/arm/pmu.c
> > > > @@ -28,6 +28,7 @@
> > > >  #define PMU_PMCR_X         (1 << 4)
> > > >  #define PMU_PMCR_DP        (1 << 5)
> > > >  #define PMU_PMCR_LC        (1 << 6)
> > > > +#define PMU_PMCR_LP        (1 << 7)
> > > >  #define PMU_PMCR_N_SHIFT   11
> > > >  #define PMU_PMCR_N_MASK    0x1f
> > > >  #define PMU_PMCR_ID_SHIFT  16
> > > > @@ -55,10 +56,15 @@
> > > >  #define EXT_COMMON_EVENTS_HIGH	0x403F
> > > >  
> > > >  #define ALL_SET			0x00000000FFFFFFFFULL
> > > > +#define ALL_SET_64		0xFFFFFFFFFFFFFFFFULL
> > > >  #define ALL_CLEAR		0x0000000000000000ULL
> > > >  #define PRE_OVERFLOW		0x00000000FFFFFFF0ULL
> > > > +#define PRE_OVERFLOW_64		0xFFFFFFFFFFFFFFF0ULL
> > > >  #define PRE_OVERFLOW2		0x00000000FFFFFFDCULL
> > > >  
> > > > +#define PRE_OVERFLOW_AT(_64b)	(_64b ? PRE_OVERFLOW_64 : PRE_OVERFLOW)
> > > > +#define ALL_SET_AT(_64b)	(_64b ? ALL_SET_64 : ALL_SET)
> > > > +
> > > >  #define PMU_PPI			23
> > > >  
> > > >  struct pmu {
> > > > @@ -429,8 +435,10 @@ static bool satisfy_prerequisites(uint32_t *events, unsigned int nb_events,
> > > >  static void test_basic_event_count(bool overflow_at_64bits)
> > > >  {
> > > >  	uint32_t implemented_counter_mask, non_implemented_counter_mask;
> > > > -	uint32_t counter_mask;
> > > > +	uint64_t pre_overflow = PRE_OVERFLOW_AT(overflow_at_64bits);
> > > > +	uint64_t pmcr_lp = overflow_at_64bits ? PMU_PMCR_LP : 0;
> > > >  	uint32_t events[] = {CPU_CYCLES, INST_RETIRED};
> > > > +	uint32_t counter_mask;
> > > >  
> > > >  	if (!satisfy_prerequisites(events, ARRAY_SIZE(events),
> > > >  				   overflow_at_64bits))
> > > > @@ -452,13 +460,13 @@ static void test_basic_event_count(bool overflow_at_64bits)
> > > >  	 * clear cycle and all event counters and allow counter enablement
> > > >  	 * through PMCNTENSET. LC is RES1.
> > > >  	 */
> > > > -	set_pmcr(pmu.pmcr_ro | PMU_PMCR_LC | PMU_PMCR_C | PMU_PMCR_P);
> > > > +	set_pmcr(pmu.pmcr_ro | PMU_PMCR_LC | PMU_PMCR_C | PMU_PMCR_P | pmcr_lp);
> > > >  	isb();
> > > > -	report(get_pmcr() == (pmu.pmcr_ro | PMU_PMCR_LC), "pmcr: reset counters");
> > > > +	report(get_pmcr() == (pmu.pmcr_ro | PMU_PMCR_LC | pmcr_lp), "pmcr: reset counters");
> > > >  
> > > >  	/* Preset counter #0 to pre overflow value to trigger an overflow */
> > > > -	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
> > > > -	report(read_regn_el0(pmevcntr, 0) == PRE_OVERFLOW,
> > > > +	write_regn_el0(pmevcntr, 0, pre_overflow);
> > > > +	report(read_regn_el0(pmevcntr, 0) == pre_overflow,
> > > >  		"counter #0 preset to pre-overflow value");
> > > >  	report(!read_regn_el0(pmevcntr, 1), "counter #1 is 0");
> > > >  
> > > > @@ -511,6 +519,8 @@ static void test_mem_access(bool overflow_at_64bits)
> > > >  {
> > > >  	void *addr = malloc(PAGE_SIZE);
> > > >  	uint32_t events[] = {MEM_ACCESS, MEM_ACCESS};
> > > > +	uint64_t pre_overflow = PRE_OVERFLOW_AT(overflow_at_64bits);
> > > > +	uint64_t pmcr_lp = overflow_at_64bits ? PMU_PMCR_LP : 0;
> > > >  
> > > >  	if (!satisfy_prerequisites(events, ARRAY_SIZE(events),
> > > >  				   overflow_at_64bits))
> > > > @@ -522,7 +532,7 @@ static void test_mem_access(bool overflow_at_64bits)
> > > >  	write_regn_el0(pmevtyper, 1, MEM_ACCESS | PMEVTYPER_EXCLUDE_EL0);
> > > >  	write_sysreg_s(0x3, PMCNTENSET_EL0);
> > > >  	isb();
> > > > -	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> > > > +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
> > > >  	report_info("counter #0 is %ld (MEM_ACCESS)", read_regn_el0(pmevcntr, 0));
> > > >  	report_info("counter #1 is %ld (MEM_ACCESS)", read_regn_el0(pmevcntr, 1));
> > > >  	/* We may measure more than 20 mem access depending on the core */
> > > > @@ -532,11 +542,11 @@ static void test_mem_access(bool overflow_at_64bits)
> > > >  
> > > >  	pmu_reset();
> > > >  
> > > > -	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
> > > > -	write_regn_el0(pmevcntr, 1, PRE_OVERFLOW);
> > > > +	write_regn_el0(pmevcntr, 0, pre_overflow);
> > > > +	write_regn_el0(pmevcntr, 1, pre_overflow);
> > > >  	write_sysreg_s(0x3, PMCNTENSET_EL0);
> > > >  	isb();
> > > > -	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> > > > +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
> > > >  	report(read_sysreg(pmovsclr_el0) == 0x3,
> > > >  	       "Ran 20 mem accesses with expected overflows on both counters");
> > > >  	report_info("cnt#0 = %ld cnt#1=%ld overflow=0x%lx",
> > > > @@ -546,6 +556,8 @@ static void test_mem_access(bool overflow_at_64bits)
> > > >  
> > > >  static void test_sw_incr(bool overflow_at_64bits)
> > > >  {
> > > > +	uint64_t pre_overflow = PRE_OVERFLOW_AT(overflow_at_64bits);
> > > > +	uint64_t pmcr_lp = overflow_at_64bits ? PMU_PMCR_LP : 0;
> > > >  	uint32_t events[] = {SW_INCR, SW_INCR};
> > > >  	uint64_t cntr0;
> > > >  	int i;
> > > > @@ -561,7 +573,7 @@ static void test_sw_incr(bool overflow_at_64bits)
> > > >  	/* enable counters #0 and #1 */
> > > >  	write_sysreg_s(0x3, PMCNTENSET_EL0);
> > > >  
> > > > -	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
> > > > +	write_regn_el0(pmevcntr, 0, pre_overflow);
> > > >  	isb();
> > > >  
> > > >  	for (i = 0; i < 100; i++)
> > > > @@ -569,21 +581,21 @@ static void test_sw_incr(bool overflow_at_64bits)
> > > >  
> > > >  	isb();
> > > >  	report_info("SW_INCR counter #0 has value %ld", read_regn_el0(pmevcntr, 0));
> > > > -	report(read_regn_el0(pmevcntr, 0) == PRE_OVERFLOW,
> > > > +	report(read_regn_el0(pmevcntr, 0) == pre_overflow,
> > > >  		"PWSYNC does not increment if PMCR.E is unset");
> > > >  
> > > >  	pmu_reset();
> > > >  
> > > > -	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
> > > > +	write_regn_el0(pmevcntr, 0, pre_overflow);
> > > >  	write_sysreg_s(0x3, PMCNTENSET_EL0);
> > > > -	set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
> > > > +	set_pmcr(pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
> > > >  	isb();
> > > >  
> > > >  	for (i = 0; i < 100; i++)
> > > >  		write_sysreg(0x3, pmswinc_el0);
> > > >  
> > > >  	isb();
> > > > -	cntr0 = (pmu.version < ID_DFR0_PMU_V3_8_5) ? 84 : PRE_OVERFLOW + 100;
> > > > +	cntr0 = (pmu.version < ID_DFR0_PMU_V3_8_5) ? 84 : pre_overflow + 100;
> > > >  	report(read_regn_el0(pmevcntr, 0) == cntr0, "counter #0 after + 100 SW_INCR");
> > > >  	report(read_regn_el0(pmevcntr, 1) == 100, "counter #1 after + 100 SW_INCR");
> > > >  	report_info("counter values after 100 SW_INCR #0=%ld #1=%ld",
> > > > @@ -844,6 +856,9 @@ static bool expect_interrupts(uint32_t bitmap)
> > > >  
> > > >  static void test_overflow_interrupt(bool overflow_at_64bits)
> > > >  {
> > > > +	uint64_t pre_overflow = PRE_OVERFLOW_AT(overflow_at_64bits);
> > > > +	uint64_t all_set = ALL_SET_AT(overflow_at_64bits);
> > > > +	uint64_t pmcr_lp = overflow_at_64bits ? PMU_PMCR_LP : 0;
> > > >  	uint32_t events[] = {MEM_ACCESS, SW_INCR};
> > > >  	void *addr = malloc(PAGE_SIZE);
> > > >  	int i;
> > > > @@ -862,16 +877,16 @@ static void test_overflow_interrupt(bool overflow_at_64bits)
> > > >  	write_regn_el0(pmevtyper, 0, MEM_ACCESS | PMEVTYPER_EXCLUDE_EL0);
> > > >  	write_regn_el0(pmevtyper, 1, SW_INCR | PMEVTYPER_EXCLUDE_EL0);
> > > >  	write_sysreg_s(0x3, PMCNTENSET_EL0);
> > > > -	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
> > > > -	write_regn_el0(pmevcntr, 1, PRE_OVERFLOW);
> > > > +	write_regn_el0(pmevcntr, 0, pre_overflow);
> > > > +	write_regn_el0(pmevcntr, 1, pre_overflow);
> > > >  	isb();
> > > >  
> > > >  	/* interrupts are disabled (PMINTENSET_EL1 == 0) */
> > > >  
> > > > -	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
> > > > +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
> > > >  	report(expect_interrupts(0), "no overflow interrupt after preset");
> > > >  
> > > > -	set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
> > > > +	set_pmcr(pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
> > > >  	isb();
> > > >  
> > > >  	for (i = 0; i < 100; i++)
> > > > @@ -886,12 +901,12 @@ static void test_overflow_interrupt(bool overflow_at_64bits)
> > > >  
> > > >  	pmu_reset_stats();
> > > >  
> > > > -	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
> > > > -	write_regn_el0(pmevcntr, 1, PRE_OVERFLOW);
> > > > +	write_regn_el0(pmevcntr, 0, pre_overflow);
> > > > +	write_regn_el0(pmevcntr, 1, pre_overflow);
> > > >  	write_sysreg(ALL_SET, pmintenset_el1);
> > > >  	isb();
> > > >  
> > > > -	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
> > > > +	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
> > > >  	for (i = 0; i < 100; i++)
> > > >  		write_sysreg(0x3, pmswinc_el0);
> > > >  
> > > > @@ -900,25 +915,35 @@ static void test_overflow_interrupt(bool overflow_at_64bits)
> > > >  	report(expect_interrupts(0x3),
> > > >  		"overflow interrupts expected on #0 and #1");
> > > >  
> > > > -	/* promote to 64-b */
> > > > +	/*
> > > > +	 * promote to 64-b:
> > > > +	 *
> > > > +	 * This only applies to the !overflow_at_64bits case, as
> > > > +	 * overflow_at_64bits doesn't implement CHAIN events. The
> > > > +	 * overflow_at_64bits case just checks that chained counters are
> > > > +	 * not incremented when PMCR.LP == 1.
> > > > +	 */
> > > 
> > > If this doesn't do anything for when overflow_at_64bits, and since the
> > > interrupt is already tested before this part, why not exit early?
> > > 
> > > Or the test could check that the CHAIN event indeed does not increment when
> > > LP=1 at the end of this function.
> > 
> > That's precisely what it's doing.
> 
> Where? Are you referring to this part?
> 
> 	if (overflow_at_64bits)
> 		report(expect_interrupts(0x1),
> 		       "expect overflow interrupt on even counter");
> 
> My suggestion was to check that the counter that counts the CHAIN event
> didn't increment (PMEVCNTR1_EL0 == all_set).

Ah, I see. Yes, this could check that there are no interrupts and that
the even counter doesn't increment.

> I was thinking that since KVM
> emulates the CHAIN event in software, it might be useful to check that the
> final state of all registers is consistent. I'll leave it up to you to
> decide if you want to add this extra check.

Will add it if no other test is checking that, which I think is the
case.

Thanks!
Ricardo

> 
> Thanks,
> Alex
> 
> > 
> > Thanks!
> > Ricardo
> > 
> > > 
> > > Thanks,
> > > Alex
> > > 
> > > >  
> > > >  	pmu_reset_stats();
> > > >  
> > > >  	write_regn_el0(pmevtyper, 1, CHAIN | PMEVTYPER_EXCLUDE_EL0);
> > > > -	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
> > > > +	write_regn_el0(pmevcntr, 0, pre_overflow);
> > > >  	isb();
> > > > -	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
> > > > -	report(expect_interrupts(0x1),
> > > > -		"expect overflow interrupt on 32b boundary");
> > > > +	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
> > > > +	report(expect_interrupts(0x1), "expect overflow interrupt");
> > > >  
> > > >  	/* overflow on odd counter */
> > > >  	pmu_reset_stats();
> > > > -	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
> > > > -	write_regn_el0(pmevcntr, 1, ALL_SET);
> > > > +	write_regn_el0(pmevcntr, 0, pre_overflow);
> > > > +	write_regn_el0(pmevcntr, 1, all_set);
> > > >  	isb();
> > > > -	mem_access_loop(addr, 400, pmu.pmcr_ro | PMU_PMCR_E);
> > > > -	report(expect_interrupts(0x3),
> > > > -		"expect overflow interrupt on even and odd counter");
> > > > +	mem_access_loop(addr, 400, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
> > > > +	if (overflow_at_64bits)
> > > > +		report(expect_interrupts(0x1),
> > > > +		       "expect overflow interrupt on even counter");
> > > > +	else
> > > > +		report(expect_interrupts(0x3),
> > > > +		       "expect overflow interrupt on even and odd counter");
> > > >  }
> > > >  #endif
> > > >  
> > > > @@ -1119,10 +1144,13 @@ int main(int argc, char *argv[])
> > > >  		report_prefix_pop();
> > > >  	} else if (strcmp(argv[1], "pmu-basic-event-count") == 0) {
> > > >  		run_test(argv[1], test_basic_event_count, false);
> > > > +		run_test(argv[1], test_basic_event_count, true);
> > > >  	} else if (strcmp(argv[1], "pmu-mem-access") == 0) {
> > > >  		run_test(argv[1], test_mem_access, false);
> > > > +		run_test(argv[1], test_mem_access, true);
> > > >  	} else if (strcmp(argv[1], "pmu-sw-incr") == 0) {
> > > >  		run_test(argv[1], test_sw_incr, false);
> > > > +		run_test(argv[1], test_sw_incr, true);
> > > >  	} else if (strcmp(argv[1], "pmu-chained-counters") == 0) {
> > > >  		run_test(argv[1], test_chained_counters, false);
> > > >  	} else if (strcmp(argv[1], "pmu-chained-sw-incr") == 0) {
> > > > @@ -1131,6 +1159,7 @@ int main(int argc, char *argv[])
> > > >  		run_test(argv[1], test_chain_promotion, false);
> > > >  	} else if (strcmp(argv[1], "pmu-overflow-interrupt") == 0) {
> > > >  		run_test(argv[1], test_overflow_interrupt, false);
> > > > +		run_test(argv[1], test_overflow_interrupt, true);
> > > >  	} else {
> > > >  		report_abort("Unknown sub-test '%s'", argv[1]);
> > > >  	}
> > > > -- 
> > > > 2.39.0.rc0.267.gcb52ba06e7-goog
> > > > 



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux