Re: [PATCH v7 10/20] x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Kai Huang <kai.huang@xxxxxxxxx> writes:

> TDX reports a list of "Convertible Memory Region" (CMR) to indicate all
> memory regions that can possibly be used by the TDX module, but they are
> not automatically usable to the TDX module.  As a step of initializing
> the TDX module, the kernel needs to choose a list of memory regions (out
> from convertible memory regions) that the TDX module can use and pass
> those regions to the TDX module.  Once this is done, those "TDX-usable"
> memory regions are fixed during module's lifetime.  No more TDX-usable
> memory can be added to the TDX module after that.
>
> The initial support of TDX guests will only allocate TDX guest memory
> from the global page allocator.  To keep things simple, this initial
> implementation simply guarantees all pages in the page allocator are TDX
> memory.  To achieve this, use all system memory in the core-mm at the
> time of initializing the TDX module as TDX memory, and at the meantime,
> refuse to add any non-TDX-memory in the memory hotplug.
>
> Specifically, walk through all memory regions managed by memblock and
> add them to a global list of "TDX-usable" memory regions, which is a
> fixed list after the module initialization (or empty if initialization
> fails).  To reject non-TDX-memory in memory hotplug, add an additional
> check in arch_add_memory() to check whether the new region is covered by
> any region in the "TDX-usable" memory region list.
>
> Note this requires all memory regions in memblock are TDX convertible
> memory when initializing the TDX module.  This is true in practice if no
> new memory has been hot-added before initializing the TDX module, since
> in practice all boot-time present DIMM is TDX convertible memory.  If
> any new memory has been hot-added, then initializing the TDX module will
> fail due to that memory region is not covered by CMR.
>
> This can be enhanced in the future, i.e. by allowing adding non-TDX
> memory to a separate NUMA node.  In this case, the "TDX-capable" nodes
> and the "non-TDX-capable" nodes can co-exist, but the kernel/userspace
> needs to guarantee memory pages for TDX guests are always allocated from
> the "TDX-capable" nodes.
>
> Note TDX assumes convertible memory is always physically present during
> machine's runtime.  A non-buggy BIOS should never support hot-removal of
> any convertible memory.  This implementation doesn't handle ACPI memory
> removal but depends on the BIOS to behave correctly.
>
> Signed-off-by: Kai Huang <kai.huang@xxxxxxxxx>
> ---
>
> v6 -> v7:
>  - Changed to use all system memory in memblock at the time of
>    initializing the TDX module as TDX memory
>  - Added memory hotplug support
>
> ---
>  arch/x86/Kconfig            |   1 +
>  arch/x86/include/asm/tdx.h  |   3 +
>  arch/x86/mm/init_64.c       |  10 ++
>  arch/x86/virt/vmx/tdx/tdx.c | 183 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 197 insertions(+)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index dd333b46fafb..b36129183035 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -1959,6 +1959,7 @@ config INTEL_TDX_HOST
>  	depends on X86_64
>  	depends on KVM_INTEL
>  	depends on X86_X2APIC
> +	select ARCH_KEEP_MEMBLOCK
>  	help
>  	  Intel Trust Domain Extensions (TDX) protects guest VMs from malicious
>  	  host and certain physical attacks.  This option enables necessary TDX
> diff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h
> index d688228f3151..71169ecefabf 100644
> --- a/arch/x86/include/asm/tdx.h
> +++ b/arch/x86/include/asm/tdx.h
> @@ -111,9 +111,12 @@ static inline long tdx_kvm_hypercall(unsigned int nr, unsigned long p1,
>  #ifdef CONFIG_INTEL_TDX_HOST
>  bool platform_tdx_enabled(void);
>  int tdx_enable(void);
> +bool tdx_cc_memory_compatible(unsigned long start_pfn, unsigned long end_pfn);
>  #else	/* !CONFIG_INTEL_TDX_HOST */
>  static inline bool platform_tdx_enabled(void) { return false; }
>  static inline int tdx_enable(void)  { return -ENODEV; }
> +static inline bool tdx_cc_memory_compatible(unsigned long start_pfn,
> +		unsigned long end_pfn) { return true; }
>  #endif	/* CONFIG_INTEL_TDX_HOST */
>  
>  #endif /* !__ASSEMBLY__ */
> diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
> index 3f040c6e5d13..900341333d7e 100644
> --- a/arch/x86/mm/init_64.c
> +++ b/arch/x86/mm/init_64.c
> @@ -55,6 +55,7 @@
>  #include <asm/uv/uv.h>
>  #include <asm/setup.h>
>  #include <asm/ftrace.h>
> +#include <asm/tdx.h>
>  
>  #include "mm_internal.h"
>  
> @@ -968,6 +969,15 @@ int arch_add_memory(int nid, u64 start, u64 size,
>  	unsigned long start_pfn = start >> PAGE_SHIFT;
>  	unsigned long nr_pages = size >> PAGE_SHIFT;
>  
> +	/*
> +	 * For now if TDX is enabled, all pages in the page allocator
> +	 * must be TDX memory, which is a fixed set of memory regions
> +	 * that are passed to the TDX module.  Reject the new region
> +	 * if it is not TDX memory to guarantee above is true.
> +	 */
> +	if (!tdx_cc_memory_compatible(start_pfn, start_pfn + nr_pages))
> +		return -EINVAL;
> +
>  	init_memory_mapping(start, start + size, params->pgprot);
>  
>  	return add_pages(nid, start_pfn, nr_pages, params);
> diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
> index 43227af25e44..32af86e31c47 100644
> --- a/arch/x86/virt/vmx/tdx/tdx.c
> +++ b/arch/x86/virt/vmx/tdx/tdx.c
> @@ -16,6 +16,11 @@
>  #include <linux/smp.h>
>  #include <linux/atomic.h>
>  #include <linux/align.h>
> +#include <linux/list.h>
> +#include <linux/slab.h>
> +#include <linux/memblock.h>
> +#include <linux/minmax.h>
> +#include <linux/sizes.h>
>  #include <asm/msr-index.h>
>  #include <asm/msr.h>
>  #include <asm/apic.h>
> @@ -34,6 +39,13 @@ enum tdx_module_status_t {
>  	TDX_MODULE_SHUTDOWN,
>  };
>  
> +struct tdx_memblock {
> +	struct list_head list;
> +	unsigned long start_pfn;

Why not use 'phys_addr_t'?

> +	unsigned long end_pfn;
> +	int nid;
> +};
> +
>  static u32 tdx_keyid_start __ro_after_init;
>  static u32 tdx_keyid_num __ro_after_init;
>  
> @@ -46,6 +58,9 @@ static struct tdsysinfo_struct tdx_sysinfo;
>  static struct cmr_info tdx_cmr_array[MAX_CMRS] __aligned(CMR_INFO_ARRAY_ALIGNMENT);
>  static int tdx_cmr_num;
>  
> +/* All TDX-usable memory regions */
> +static LIST_HEAD(tdx_memlist);
> +
>  /*
>   * Detect TDX private KeyIDs to see whether TDX has been enabled by the
>   * BIOS.  Both initializing the TDX module and running TDX guest require
> @@ -329,6 +344,107 @@ static int tdx_get_sysinfo(void)
>  	return trim_empty_cmrs(tdx_cmr_array, &tdx_cmr_num);
>  }
>  
> +/* Check whether the given pfn range is covered by any CMR or not. */
> +static bool pfn_range_covered_by_cmr(unsigned long start_pfn,
> +				     unsigned long end_pfn)
> +{
> +	int i;
> +
> +	for (i = 0; i < tdx_cmr_num; i++) {
> +		struct cmr_info *cmr = &tdx_cmr_array[i];
> +		unsigned long cmr_start_pfn;
> +		unsigned long cmr_end_pfn;
> +
> +		cmr_start_pfn = cmr->base >> PAGE_SHIFT;
> +		cmr_end_pfn = (cmr->base + cmr->size) >> PAGE_SHIFT;

Why not use PHYS_PFN() or PFN_DOWN()?  And PFN_PHYS() in reverse direction?

> +
> +		if (start_pfn >= cmr_start_pfn && end_pfn <= cmr_end_pfn)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
> +/*
> + * Add a memory region on a given node as a TDX memory block.  The caller
> + * to make sure all memory regions are added in address ascending order
> + * and don't overlap.
> + */
> +static int add_tdx_memblock(unsigned long start_pfn, unsigned long end_pfn,
> +			    int nid)
> +{
> +	struct tdx_memblock *tmb;
> +
> +	tmb = kmalloc(sizeof(*tmb), GFP_KERNEL);
> +	if (!tmb)
> +		return -ENOMEM;
> +
> +	INIT_LIST_HEAD(&tmb->list);
> +	tmb->start_pfn = start_pfn;
> +	tmb->end_pfn = end_pfn;
> +	tmb->nid = nid;
> +
> +	list_add_tail(&tmb->list, &tdx_memlist);
> +	return 0;
> +}
> +
> +static void free_tdx_memory(void)
> +{
> +	while (!list_empty(&tdx_memlist)) {
> +		struct tdx_memblock *tmb = list_first_entry(&tdx_memlist,
> +				struct tdx_memblock, list);
> +
> +		list_del(&tmb->list);
> +		kfree(tmb);
> +	}
> +}
> +
> +/*
> + * Add all memblock memory regions to the @tdx_memlist as TDX memory.
> + * Must be called when get_online_mems() is called by the caller.
> + */
> +static int build_tdx_memory(void)
> +{
> +	unsigned long start_pfn, end_pfn;
> +	int i, nid, ret;
> +
> +	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
> +		/*
> +		 * The first 1MB may not be reported as TDX convertible
> +		 * memory.  Manually exclude them as TDX memory.
> +		 *
> +		 * This is fine as the first 1MB is already reserved in
> +		 * reserve_real_mode() and won't end up to ZONE_DMA as
> +		 * free page anyway.
> +		 */
> +		start_pfn = max(start_pfn, (unsigned long)SZ_1M >> PAGE_SHIFT);
> +		if (start_pfn >= end_pfn)
> +			continue;

How about check whether first 1MB is reserved instead of depending on
the corresponding code isn't changed?  Via for_each_reserved_mem_range()?

> +
> +		/* Verify memory is truly TDX convertible memory */
> +		if (!pfn_range_covered_by_cmr(start_pfn, end_pfn)) {
> +			pr_info("Memory region [0x%lx, 0x%lx) is not TDX convertible memorry.\n",
> +					start_pfn << PAGE_SHIFT,
> +					end_pfn << PAGE_SHIFT);
> +			return -EINVAL;
> +		}
> +
> +		/*
> +		 * Add the memory regions as TDX memory.  The regions in
> +		 * memblock has already guaranteed they are in address
> +		 * ascending order and don't overlap.
> +		 */
> +		ret = add_tdx_memblock(start_pfn, end_pfn, nid);
> +		if (ret)
> +			goto err;
> +	}
> +
> +	return 0;
> +err:
> +	free_tdx_memory();
> +	return ret;
> +}
> +
>  /*
>   * Detect and initialize the TDX module.
>   *
> @@ -357,12 +473,56 @@ static int init_tdx_module(void)
>  	if (ret)
>  		goto out;
>  
> +	/*
> +	 * All memory regions that can be used by the TDX module must be
> +	 * passed to the TDX module during the module initialization.
> +	 * Once this is done, all "TDX-usable" memory regions are fixed
> +	 * during module's runtime.
> +	 *
> +	 * The initial support of TDX guests only allocates memory from
> +	 * the global page allocator.  To keep things simple, for now
> +	 * just make sure all pages in the page allocator are TDX memory.
> +	 *
> +	 * To achieve this, use all system memory in the core-mm at the
> +	 * time of initializing the TDX module as TDX memory, and at the
> +	 * meantime, reject any new memory in memory hot-add.
> +	 *
> +	 * This works as in practice, all boot-time present DIMM is TDX
> +	 * convertible memory.  However if any new memory is hot-added
> +	 * before initializing the TDX module, the initialization will
> +	 * fail due to that memory is not covered by CMR.
> +	 *
> +	 * This can be enhanced in the future, i.e. by allowing adding or
> +	 * onlining non-TDX memory to a separate node, in which case the
> +	 * "TDX-capable" nodes and the "non-TDX-capable" nodes can exist
> +	 * together -- the userspace/kernel just needs to make sure pages
> +	 * for TDX guests must come from those "TDX-capable" nodes.
> +	 *
> +	 * Build the list of TDX memory regions as mentioned above so
> +	 * they can be passed to the TDX module later.
> +	 */
> +	get_online_mems();
> +
> +	ret = build_tdx_memory();
> +	if (ret)
> +		goto out;
>  	/*
>  	 * Return -EINVAL until all steps of TDX module initialization
>  	 * process are done.
>  	 */
>  	ret = -EINVAL;
>  out:
> +	/*
> +	 * Memory hotplug checks the hot-added memory region against the
> +	 * @tdx_memlist to see if the region is TDX memory.
> +	 *
> +	 * Do put_online_mems() here to make sure any modification to
> +	 * @tdx_memlist is done while holding the memory hotplug read
> +	 * lock, so that the memory hotplug path can just check the
> +	 * @tdx_memlist w/o holding the @tdx_module_lock which may cause
> +	 * deadlock.
> +	 */
> +	put_online_mems();
>  	return ret;
>  }
>  
> @@ -485,3 +645,26 @@ int tdx_enable(void)
>  	return ret;
>  }
>  EXPORT_SYMBOL_GPL(tdx_enable);
> +
> +/*
> + * Check whether the given range is TDX memory.  Must be called between
> + * mem_hotplug_begin()/mem_hotplug_done().

Must be called with mem_hotplug_lock write-locked.

> + */
> +bool tdx_cc_memory_compatible(unsigned long start_pfn, unsigned long end_pfn)
> +{
> +	struct tdx_memblock *tmb;
> +
> +	/* Empty list means TDX isn't enabled successfully */
> +	if (list_empty(&tdx_memlist))
> +		return true;
> +
> +	list_for_each_entry(tmb, &tdx_memlist, list) {
> +		/*
> +		 * The new range is TDX memory if it is fully covered
> +		 * by any TDX memory block.
> +		 */
> +		if (start_pfn >= tmb->start_pfn && end_pfn <= tmb->end_pfn)
> +			return true;
> +	}
> +	return false;
> +}

Best Regards,
Huang, Ying



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux