Changes since v9: - Rebase to the latest sean/for_paolo/6.1 (5df50a4a9b60) - Patch "x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition" was dropped from this series as it is already queued. - Add Drew's R-b tag to PATCH27. Original description: Currently, KVM handles HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} requests by flushing the whole VPID and this is sub-optimal. This series introduces the required mechanism to make handling of these requests more fine-grained by flushing individual GVAs only (when requested). On this foundation, "Direct Virtual Flush" Hyper-V feature is implemented. The feature allows L0 to handle Hyper-V TLB flush hypercalls directly at L0 without the need to reflect the exit to L1. This has at least two benefits: reflecting vmexit and the consequent vmenter are avoided + L0 has precise information whether the target vCPU is actually running (and thus requires a kick). Sean Christopherson (1): KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov (38): KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag KVM: x86: hyper-v: Introduce TLB flush fifo KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi() KVM: x86: hyper-v: Create a separate fifo for L2 TLB flush KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hook KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() KVM: x86: hyper-v: L2 TLB flush KVM: x86: hyper-v: Introduce fast guest_hv_cpuid_has_l2_tlb_flush() check KVM: nVMX: hyper-v: Cache VP assist page in 'struct kvm_vcpu_hv' KVM: nVMX: hyper-v: Enable L2 TLB flush KVM: nSVM: hyper-v: Enable L2 TLB flush KVM: x86: Expose Hyper-V L2 TLB flush feature KVM: selftests: Better XMM read/write helpers KVM: selftests: Move HYPERV_LINUX_OS_ID definition to a common header KVM: selftests: Move the function doing Hyper-V hypercall to a common header KVM: selftests: Hyper-V PV IPI selftest KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too KVM: selftests: Export vm_vaddr_unused_gap() to make it possible to request unmapped ranges KVM: selftests: Export _vm_get_page_table_entry() KVM: selftests: Hyper-V PV TLB flush selftest KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h KVM: selftests: Sync 'struct hv_vp_assist_page' definition with hyperv-tlfs.h KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h KVM: selftests: Split off load_evmcs() from load_vmcs() KVM: selftests: Create a vendor independent helper to allocate Hyper-V specific test pages KVM: selftests: Allocate Hyper-V partition assist page KVM: selftests: evmcs_test: Introduce L2 TLB flush test KVM: selftests: hyperv_svm_test: Introduce L2 TLB flush test KVM: selftests: Rename 'evmcs_test' to 'hyperv_evmcs' arch/x86/include/asm/hyperv-tlfs.h | 2 + arch/x86/include/asm/kvm-x86-ops.h | 2 +- arch/x86/include/asm/kvm_host.h | 42 +- arch/x86/kvm/Makefile | 3 +- arch/x86/kvm/hyperv.c | 328 +++++++-- arch/x86/kvm/hyperv.h | 53 +- arch/x86/kvm/svm/hyperv.c | 18 + arch/x86/kvm/svm/hyperv.h | 48 ++ arch/x86/kvm/svm/nested.c | 39 +- arch/x86/kvm/svm/svm_onhyperv.c | 2 +- arch/x86/kvm/svm/svm_onhyperv.h | 6 +- arch/x86/kvm/trace.h | 21 +- arch/x86/kvm/vmx/evmcs.c | 42 +- arch/x86/kvm/vmx/evmcs.h | 13 +- arch/x86/kvm/vmx/nested.c | 44 +- arch/x86/kvm/vmx/vmx.c | 6 +- arch/x86/kvm/x86.c | 18 +- arch/x86/kvm/x86.h | 1 + include/asm-generic/hyperv-tlfs.h | 5 + include/asm-generic/mshyperv.h | 11 +- tools/testing/selftests/kvm/.gitignore | 4 +- tools/testing/selftests/kvm/Makefile | 5 +- .../selftests/kvm/include/kvm_util_base.h | 1 + .../selftests/kvm/include/x86_64/evmcs.h | 48 +- .../selftests/kvm/include/x86_64/hyperv.h | 100 +++ .../selftests/kvm/include/x86_64/processor.h | 72 +- .../selftests/kvm/include/x86_64/vmx.h | 8 - tools/testing/selftests/kvm/lib/kvm_util.c | 9 +- .../testing/selftests/kvm/lib/x86_64/hyperv.c | 46 ++ .../selftests/kvm/lib/x86_64/processor.c | 5 +- tools/testing/selftests/kvm/lib/x86_64/vmx.c | 45 +- .../x86_64/{evmcs_test.c => hyperv_evmcs.c} | 69 +- .../selftests/kvm/x86_64/hyperv_features.c | 24 +- .../testing/selftests/kvm/x86_64/hyperv_ipi.c | 330 +++++++++ .../selftests/kvm/x86_64/hyperv_svm_test.c | 64 +- .../selftests/kvm/x86_64/hyperv_tlb_flush.c | 644 ++++++++++++++++++ 36 files changed, 1924 insertions(+), 254 deletions(-) create mode 100644 arch/x86/kvm/svm/hyperv.c create mode 100644 tools/testing/selftests/kvm/lib/x86_64/hyperv.c rename tools/testing/selftests/kvm/x86_64/{evmcs_test.c => hyperv_evmcs.c} (73%) create mode 100644 tools/testing/selftests/kvm/x86_64/hyperv_ipi.c create mode 100644 tools/testing/selftests/kvm/x86_64/hyperv_tlb_flush.c -- 2.37.3