Re: IOTLB support for vhost/vsock breaks crosvm on Android

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Will,

On Fri, Aug 05, 2022 at 07:11:06PM +0100, Will Deacon wrote:
Hi folks,

[tl;dr a change from ~18 months ago breaks Android userspace and I don't
know what to do about it]

As part of the development work for next year's Android, we've recently
been bringing up a 5.15 KVM host and have observed that vsock no longer
works for communicating with a guest because crosvm gets an unexpected
-EFAULT back from the VHOST_VSOCK_SET_RUNNING ioctl():

| E crosvm : vpipe worker thread exited with error: VhostVsockStart(IoctlError(Os { code: 14, kind: Uncategorized, message: "Bad address" }))

The same guest payload works correctly on a 5.10 KVM host kernel.

After some digging, we narrowed this change in behaviour down to
e13a6915a03f ("vhost/vsock: add IOTLB API support") and further digging
reveals that the infamous VIRTIO_F_ACCESS_PLATFORM feature flag is to
blame. Indeed, our tests once again pass if we revert that patch (there's
a trivial conflict with the later addition of VIRTIO_VSOCK_F_SEQPACKET
but otherwise it reverts cleanly).

On Android, KVM runs in a mode where the host kernel is, by default,
unable to access guest memory [1] and so memory used for virtio (e.g.
the rings and descriptor data) needs to be shared explicitly with the
host using hypercalls issued by the guest. We implement this on top of
restricted DMA [2], whereby the guest allocates a pool of shared memory
during boot and bounces all virtio transfers through this window. In
order to get the guest to use the DMA API for virtio devices (which is
required for the SWIOTLB code to kick in and do the aforementioned
bouncing), crosvm sets the VIRTIO_F_ACCESS_PLATFORM feature flag on its
emulated devices and this is picked up by virtio_has_dma_quirk() in the
guest kernel. This has been working well for us so far.

With e13a6915a03f, the vhost backend for vsock now advertises
VIRTIO_F_ACCESS_PLATFORM in its response to the VHOST_GET_FEATURES
ioctl() and accepts it in the VHOST_SET_FEATURES as a mechanism to
enable the IOTLB feature (note: this is nothing to do with SWIOTLB!).
This feature is used for emulation of a virtual IOMMU and requires
explicit support for issuing IOTLB messages (see VHOST_IOTLB_MSG and
VHOST_IOTLB_MSG_V2) from userspace to manage address translations for
the virtio device.

Looking at how crosvm uses these vhost ioctl()s, we can see:

       let avail_features = self
           .vhost_handle
           .get_features()
           .map_err(Error::VhostGetFeatures)?;

       let features: c_ulonglong = self.acked_features & avail_features;
       self.vhost_handle
           .set_features(features)
           .map_err(Error::VhostSetFeatures)?;


where 'acked_features' is the feature set negotiated between crosvm and
the guest, while 'avail_features' is the supported feature set
advertised by vhost. The intersection of these now includes
VIRTIO_F_ACCESS_PLATFORM in the 5.15 kernel and so we quietly start
enabling IOTLB, despite not having any of the necessary support in
crosvm and therefore the vsock thread effectively grinds to a halt and
we cannot communicate with the guest.

The fundamental issue is, I think, that VIRTIO_F_ACCESS_PLATFORM is
being used for two very different things within the same device; for the
guest it basically means "use the DMA API, it knows what to do" but for
vhost it very specifically means "enable IOTLB". We've recently had
other problems with this flag [3] but in this case it used to work
reliably and now it doesn't anymore.

So how should we fix this? One possibility is for us to hack crosvm to
clear the VIRTIO_F_ACCESS_PLATFORM flag when setting the vhost

Why do you consider this a hack?

If the VMM implements the translation feature, it is right in my opinion that it does not enable the feature for the vhost device. Otherwise, if it wants the vhost device to do the translation, enable the feature and send the IOTLB messages to set the translation.

QEMU for example masks features when not required or supported.
crosvm should negotiate only the features it supports.

@Michael and @Jason can correct me, but if a vhost device negotiates VIRTIO_F_ACCESS_PLATFORM, then it expects the VMM to send IOTLB messages to set the translation.

Indeed that patch was to fix https://bugzilla.redhat.com/show_bug.cgi?id=1894101

features,
but others here have reasonably pointed out that they didn't expect a
kernel change to break userspace. On the flip side, the offending commit
in the kernel isn't exactly new (it's from the end of 2020!) and so it's
likely that others (e.g. QEMU) are using this feature.

Yep, QEMU can use it.

I also strongly
suspect that vhost net suffers from exactly the same issue, we just
don't happen to be using that (yet) in Android.

I think so too, the implementation in vsock was done following vhost-net.

Thanks,
Stefano




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux