Re: [PATCH v2 19/19] vdpasim: control virtqueue support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Gautam,

On Wed, Mar 30, 2022 at 8:21 PM Gautam Dawar <gautam.dawar@xxxxxxxxxx> wrote:
>
> This patch introduces the control virtqueue support for vDPA
> simulator. This is a requirement for supporting advanced features like
> multiqueue.
>
> A requirement for control virtqueue is to isolate its memory access
> from the rx/tx virtqueues. This is because when using vDPA device
> for VM, the control virqueue is not directly assigned to VM. Userspace
> (Qemu) will present a shadow control virtqueue to control for
> recording the device states.
>
> The isolation is done via the virtqueue groups and ASID support in
> vDPA through vhost-vdpa. The simulator is extended to have:
>
> 1) three virtqueues: RXVQ, TXVQ and CVQ (control virtqueue)
> 2) two virtqueue groups: group 0 contains RXVQ and TXVQ; group 1
>    contains CVQ
> 3) two address spaces and the simulator simply implements the address
>    spaces by mapping it 1:1 to IOTLB.
>
> For the VM use cases, userspace(Qemu) may set AS 0 to group 0 and AS 1
> to group 1. So we have:
>
> 1) The IOTLB for virtqueue group 0 contains the mappings of guest, so
>    RX and TX can be assigned to guest directly.
> 2) The IOTLB for virtqueue group 1 contains the mappings of CVQ which
>    is the buffers that allocated and managed by VMM only. So CVQ of
>    vhost-vdpa is visible to VMM only. And Guest can not access the CVQ
>    of vhost-vdpa.
>
> For the other use cases, since AS 0 is associated to all virtqueue
> groups by default. All virtqueues share the same mapping by default.
>
> To demonstrate the function, VIRITO_NET_F_CTRL_MACADDR is
> implemented in the simulator for the driver to set mac address.
>
> Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> Signed-off-by: Gautam Dawar <gdawar@xxxxxxxxxx>
> ---
>  drivers/vdpa/vdpa_sim/vdpa_sim.c     | 91 ++++++++++++++++++++++------
>  drivers/vdpa/vdpa_sim/vdpa_sim.h     |  2 +
>  drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 88 ++++++++++++++++++++++++++-
>  3 files changed, 161 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> index 659e2e2e4b0c..51bd0bafce06 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> @@ -96,11 +96,17 @@ static void vdpasim_do_reset(struct vdpasim *vdpasim)
>  {
>         int i;
>
> -       for (i = 0; i < vdpasim->dev_attr.nvqs; i++)
> +       spin_lock(&vdpasim->iommu_lock);
> +
> +       for (i = 0; i < vdpasim->dev_attr.nvqs; i++) {
>                 vdpasim_vq_reset(vdpasim, &vdpasim->vqs[i]);
> +               vringh_set_iotlb(&vdpasim->vqs[i].vring, &vdpasim->iommu[0],
> +                                &vdpasim->iommu_lock);
> +       }
> +
> +       for (i = 0; i < vdpasim->dev_attr.nas; i++)
> +               vhost_iotlb_reset(&vdpasim->iommu[i]);
>
> -       spin_lock(&vdpasim->iommu_lock);
> -       vhost_iotlb_reset(vdpasim->iommu);
>         spin_unlock(&vdpasim->iommu_lock);
>
>         vdpasim->features = 0;
> @@ -145,7 +151,7 @@ static dma_addr_t vdpasim_map_range(struct vdpasim *vdpasim, phys_addr_t paddr,
>         dma_addr = iova_dma_addr(&vdpasim->iova, iova);
>
>         spin_lock(&vdpasim->iommu_lock);
> -       ret = vhost_iotlb_add_range(vdpasim->iommu, (u64)dma_addr,
> +       ret = vhost_iotlb_add_range(&vdpasim->iommu[0], (u64)dma_addr,
>                                     (u64)dma_addr + size - 1, (u64)paddr, perm);
>         spin_unlock(&vdpasim->iommu_lock);
>
> @@ -161,7 +167,7 @@ static void vdpasim_unmap_range(struct vdpasim *vdpasim, dma_addr_t dma_addr,
>                                 size_t size)
>  {
>         spin_lock(&vdpasim->iommu_lock);
> -       vhost_iotlb_del_range(vdpasim->iommu, (u64)dma_addr,
> +       vhost_iotlb_del_range(&vdpasim->iommu[0], (u64)dma_addr,
>                               (u64)dma_addr + size - 1);
>         spin_unlock(&vdpasim->iommu_lock);
>
> @@ -250,8 +256,9 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
>         else
>                 ops = &vdpasim_config_ops;
>
> -       vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops, 1,
> -                                   1, dev_attr->name, false);
> +       vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops,
> +                                   dev_attr->ngroups, dev_attr->nas,
> +                                   dev_attr->name, false);
>         if (IS_ERR(vdpasim)) {
>                 ret = PTR_ERR(vdpasim);
>                 goto err_alloc;
> @@ -278,16 +285,20 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
>         if (!vdpasim->vqs)
>                 goto err_iommu;
>
> -       vdpasim->iommu = vhost_iotlb_alloc(max_iotlb_entries, 0);
> +       vdpasim->iommu = kmalloc_array(vdpasim->dev_attr.nas,
> +                                      sizeof(*vdpasim->iommu), GFP_KERNEL);
>         if (!vdpasim->iommu)
>                 goto err_iommu;
>
> +       for (i = 0; i < vdpasim->dev_attr.nas; i++)
> +               vhost_iotlb_init(&vdpasim->iommu[i], 0, 0);
> +
>         vdpasim->buffer = kvmalloc(dev_attr->buffer_size, GFP_KERNEL);
>         if (!vdpasim->buffer)
>                 goto err_iommu;
>
>         for (i = 0; i < dev_attr->nvqs; i++)
> -               vringh_set_iotlb(&vdpasim->vqs[i].vring, vdpasim->iommu,
> +               vringh_set_iotlb(&vdpasim->vqs[i].vring, &vdpasim->iommu[0],
>                                  &vdpasim->iommu_lock);
>
>         ret = iova_cache_get();
> @@ -401,7 +412,11 @@ static u32 vdpasim_get_vq_align(struct vdpa_device *vdpa)
>
>  static u32 vdpasim_get_vq_group(struct vdpa_device *vdpa, u16 idx)
>  {
> -       return 0;
> +       /* RX and TX belongs to group 0, CVQ belongs to group 1 */
> +       if (idx == 2)
> +               return 1;
> +       else
> +               return 0;

This code only works for the vDPA-net simulator, since 
vdpasim_get_vq_group() is also shared with other simulators (e.g.  
vdpa_sim_blk), should we move this net-specific code into 
vdpa_sim_net.c, maybe adding a callback implemented by the different 
simulators?

Thanks,
Stefano




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux