On Fri, Jan 22, 2010 at 06:54:42PM +0800, Liu, Jinsong wrote: > Gleb Natapov wrote: > > On Fri, Jan 22, 2010 at 05:08:32PM +0800, Liu, Jinsong wrote: > >> Gleb Natapov wrote: > >>> On Fri, Jan 22, 2010 at 10:15:44AM +0800, Liu, Jinsong wrote: > >>>> Gleb Natapov wrote: > >>>>> On Thu, Jan 21, 2010 at 07:48:23PM +0800, Liu, Jinsong wrote: > >>>>>>> From cb997030cba02e7e74a29b3d942aeba9808ed293 Mon Sep 17 > >>>>>>> 00:00:00 2001 > >>>>>> From: Liu, Jinsong <jinsong.liu@xxxxxxxxx> > >>>>>> Date: Fri, 22 Jan 2010 03:18:46 +0800 > >>>>>> Subject: [PATCH] Setup vcpu add/remove infrastructure, > >>>>>> including madt bios_info and dsdt. > >>>>>> > >>>>>> 1. setup madt bios_info structure, so that static dsdt > >>>>>> get run-time madt info like checksum address, lapic > >>>>>> address, max cpu numbers, with least hardcode magic > >>>>>> number (realmode address of bios_info). > >>>>>> 2. setup vcpu add/remove dsdt infrastructure, including > >>>>>> processor related acpi objects and control methods. > >>>>>> vcpu add/remove will trigger SCI and then control > >>>>>> method _L02. By matching madt, vcpu number and > >>>>>> add/remove action were found, then by notify control > >>>>>> method, it will notify OS acpi driver. > >>>>>> > >>>>>> Signed-off-by: Liu, Jinsong <jinsong.liu@xxxxxxxxx> > >>>>> It looks like AML code is a port of what we had in BOCHS bios with > >>>>> minor changes. Can you detail what is changed and why for easy > >>>>> review please? And this still doesn't work with Windows I assume. > >>>>> > >>>> > >>>> Yes, my work is based on BOCHS infrastructure, thanks BOCHS :) > >>>> I just change some minor points: > >>>> 1. explicitly define returen value of '_MAT' as 'buffer', otherwise > >>>> some linux acpi driver (i.e. linux 2.6.30) would parse error which > >>>> will handle it as 'integer' not 'buffer'; > >>>> 2. keep correct 'checksum' of madt when vcpu add/remove, otherwise > >>>> it will report 'checksum error' when using acpi tools to get madt > >>>> info if we add/remove vcpu; > >>>> 3. add '_EJ0' so that linux has acpi obj under > >>>> /sys/devices/LNXSYSTM:00, which is need for vcpu remove; > >>>> 4. on Method(PRSC, 0), just scan 'xxx' vcpus that qemu get from > >>>> cmdline para 'maxcpus=xxx', not all 256 vcpus, otherwise under some > >>>> dsdt processor define, it will result error; > >>> What kind of errors? Qemu should never set bit over maxcpus in PRS. > >>> > >> suppose cmdline define vcpus=4, maxvcpus=8 > >> in original BOCHS, will scan 15 lapic items start from lapic0 of > >> madt, where it only has maxvcpus lapic items in madt table, hence > >> there is risk to scan over boundary, scan to other acpi table, and > >> result in wrong vcpu online/offline status (in my test, I meet this > >> situation). Because of this reason, this patch limit scan maxvcpus > >> lapic of madt. > >> > > But what if cmdline will use vcpu=64? The idea was that \_PR scope > > will reside in its own ssdt and for each maxvcpus value there will be > > ssdt with exactly this number of processors. Ideally ssdt will be > > created dynamically like it is done now, but another solution is to > > create them at bios compilation time and load correct one at runtime. > > > > It's OK for vcpu=64. vcpu<maxvcpus. > if maxvcpus > processor defined in dsdt, it's OK since no risk scan (bios only support 15 processor is another story); > if processor defined in dsdt > maxvcpus, it has risk to scan over boundary. > > Yes, correct. So why not export maxcpus to DSDT and at the beginning of NTFY check that Arg0 < maxcpus then? > > BTW seabios creates very simple ssdt with \_PR scope right now and I > > don't see yous patch removes this so you end up with two conflicting > > \_PR scopes. > > Yes, I just notice \_PR at acpi.c. > we can move \_PR to ssdt after ssdt infrastructure was full setup. > > Thanks, > Jinsong -- Gleb. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
