[kvm-unit-tests PATCH v3 0/2] s390x: Avoid gcc 12 warnings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



gcc 12 warns if a memory operand to inline asm points to memory in the
first 4k bytes. However, in our case, these operands are fine, either
because we actually want to use that memory, or expect and handle the
resulting exception.

v2 -> v3
 * extend commit msg
 * pick up r-b
 * use macro instead of pointer to address memory

v1 -> v2
 * replace mechanism, don't use pragmas, instead use an extern symbol so
   gcc cannot conclude that the pointer is <4k

   This new extern symbol refers to the lowcore. As a result, code
   generation for lowcore accesses becomes worse.

   Alternatives:
    * Don't use extern symbol for lowcore, just for problematic pointers
    * Hide value from gcc via inline asm
    * Disable the warning globally
    * Use memory clobber instead of memory output
      Use address in register input instead of memory input
          (may require WRITE_ONCE)
    * Don't use gcc 12.0, with newer versions --param=min-pagesize=0 might
      avoid the problem

Janis Schoetterl-Glausch (2):
  s390x: Introduce symbol for lowcore and use it
  s390x: Fix gcc 12 warning about array bounds

 lib/s390x/asm/arch_def.h   |  2 ++
 lib/s390x/asm/facility.h   |  4 +--
 lib/s390x/asm/mem.h        |  4 +++
 lib/s390x/css.h            |  2 --
 lib/s390x/css_lib.c        | 12 ++++----
 lib/s390x/fault.c          | 10 +++----
 lib/s390x/interrupt.c      | 61 +++++++++++++++++++-------------------
 lib/s390x/mmu.c            |  3 +-
 s390x/flat.lds             |  1 +
 s390x/snippets/c/flat.lds  |  1 +
 s390x/css.c                |  4 +--
 s390x/diag288.c            |  4 +--
 s390x/edat.c               |  5 ++--
 s390x/emulator.c           | 15 +++++-----
 s390x/mvpg.c               |  7 ++---
 s390x/sclp.c               |  3 +-
 s390x/skey.c               |  2 +-
 s390x/skrf.c               | 11 +++----
 s390x/smp.c                | 23 +++++++-------
 s390x/snippets/c/spec_ex.c |  5 ++--
 20 files changed, 83 insertions(+), 96 deletions(-)

Range-diff against v2:
1:  412a9962 ! 1:  44b10d41 s390x: Introduce symbol for lowcore and use it
    @@ Commit message
         The new symbol is not a pointer. While this will lead to worse code
         generation (cannot use register 0 for addressing), that should not
         matter too much for kvm unit tests.
    +    Since the lowcore is located per definition at address 0, the symbol is
    +    defined via the linker scripts.
         The symbol also will be used to create pointers that the compiler cannot
         warn about as being outside the bounds of an array.
     
         Signed-off-by: Janis Schoetterl-Glausch <scgl@xxxxxxxxxxxxx>
    +    Reviewed-by: Thomas Huth <thuth@xxxxxxxxxx>
     
      ## lib/s390x/asm/arch_def.h ##
     @@ lib/s390x/asm/arch_def.h: struct lowcore {
2:  9b2eeee3 ! 2:  e9e88996 s390x: Fix gcc 12 warning about array bounds
    @@ lib/s390x/asm/mem.h
      #define _ASMS390X_MEM_H_
     +#include <asm/arch_def.h>
     +
    -+/* pointer to 0 used to avoid compiler warnings */
    -+uint8_t *mem_all = (uint8_t *)&lowcore;
    ++/* create pointer while avoiding compiler warnings */
    ++#define OPAQUE_PTR(x) ((void *)(((uint64_t)&lowcore) + (x)))
      
      #define SKEY_ACC	0xf0
      #define SKEY_FP		0x08
    @@ s390x/emulator.c: static __always_inline void __test_cpacf_invalid_parm(unsigned
      	report_prefix_push("invalid parm address");
      	expect_pgm_int();
     -	__cpacf_query(opcode, (void *) -1);
    -+	__cpacf_query(opcode, (cpacf_mask_t *)&mem_all[-1]);
    ++	__cpacf_query(opcode, OPAQUE_PTR(-1));
      	check_pgm_int_code(PGM_INT_CODE_ADDRESSING);
      	report_prefix_pop();
      }
    @@ s390x/emulator.c: static __always_inline void __test_cpacf_protected_parm(unsign
      	expect_pgm_int();
      	low_prot_enable();
     -	__cpacf_query(opcode, (void *) 8);
    -+	__cpacf_query(opcode, (cpacf_mask_t *)&mem_all[8]);
    ++	__cpacf_query(opcode, OPAQUE_PTR(8));
      	low_prot_disable();
      	check_pgm_int_code(PGM_INT_CODE_PROTECTION);
      	report_prefix_pop();
    @@ s390x/skey.c: static void test_set_prefix(void)
      	expect_pgm_int();
      	install_page(root, virt_to_pte_phys(root, pagebuf), 0);
     -	set_prefix_key_1((uint32_t *)2048);
    -+	set_prefix_key_1((uint32_t *)&mem_all[2048]);
    ++	set_prefix_key_1(OPAQUE_PTR(2048));
      	install_page(root, 0, 0);
      	check_pgm_int_code(PGM_INT_CODE_PROTECTION);
      	report(get_prefix() == old_prefix, "did not set prefix");

base-commit: 2eed0bf1096077144cc3a0dd9974689487f9511a
-- 
2.33.1




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux