On Wed, Mar 30, 2022 at 8:05 PM Gautam Dawar <gautam.dawar@xxxxxxxxxx> wrote: > > Hi All: > > This series tries to add the support for control virtqueue in vDPA. > > Control virtqueue is used by networking device for accepting various > commands from the driver. It's a must to support multiqueue and other > configurations. > > When used by vhost-vDPA bus driver for VM, the control virtqueue > should be shadowed via userspace VMM (Qemu) instead of being assigned > directly to Guest. This is because Qemu needs to know the device state > in order to start and stop device correctly (e.g for Live Migration). > > This requies to isolate the memory mapping for control virtqueue > presented by vhost-vDPA to prevent guest from accessing it directly. > > To achieve this, vDPA introduce two new abstractions: > > - address space: identified through address space id (ASID) and a set > of memory mapping in maintained > - virtqueue group: the minimal set of virtqueues that must share an > address space > > Device needs to advertise the following attributes to vDPA: > > - the number of address spaces supported in the device > - the number of virtqueue groups supported in the device > - the mappings from a specific virtqueue to its virtqueue groups > > The mappings from virtqueue to virtqueue groups is fixed and defined > by vDPA device driver. E.g: > > - For the device that has hardware ASID support, it can simply > advertise a per virtqueue group. > - For the device that does not have hardware ASID support, it can > simply advertise a single virtqueue group that contains all > virtqueues. Or if it wants a software emulated control virtqueue, it > can advertise two virtqueue groups, one is for cvq, another is for > the rest virtqueues. > > vDPA also allow to change the association between virtqueue group and > address space. So in the case of control virtqueue, userspace > VMM(Qemu) may use a dedicated address space for the control virtqueue > group to isolate the memory mapping. > > The vhost/vhost-vDPA is also extend for the userspace to: > > - query the number of virtqueue groups and address spaces supported by > the device > - query the virtqueue group for a specific virtqueue > - assocaite a virtqueue group with an address space > - send ASID based IOTLB commands > > This will help userspace VMM(Qemu) to detect whether the control vq > could be supported and isolate memory mappings of control virtqueue > from the others. > > To demonstrate the usage, vDPA simulator is extended to support > setting MAC address via a emulated control virtqueue. > > Please review. > > Changes since RFC v2: > > - Fixed memory leak for asid 0 in vhost_vdpa_remove_as() > - Removed unnecessary NULL check for iotlb in vhost_vdpa_unmap() and > changed its return type to void. > - Removed insignificant used_as member field from struct vhost_vdpa. > - Corrected the iommu parameter in call to vringh_set_iotlb() from > vdpasim_set_group_asid() > - Fixed build errors with vdpa_sim_net > - Updated alibaba, vdpa_user and virtio_pci vdpa parent drivers to > call updated vDPA APIs and ensured successful build > - Tested control (MAC address configuration) and data-path using > single virtqueue pair on Xilinx (now AMD) SN1022 SmartNIC device > and vdpa_sim_net software device using QEMU release at [1] > - Removed two extra blank lines after set_group_asid() in > include/linux/vdpa.h > > Changes since v1: > > - Rebased the v1 patch series on vhost branch of MST vhost git repo > git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git/log/?h=vhost > - Updates to accommodate vdpa_sim changes from monolithic module in > kernel used v1 patch series to current modularized class (net, block) > based approach. > - Added new attributes (ngroups and nas) to "vdpasim_dev_attr" and > propagated them from vdpa_sim_net to vdpa_sim > - Widened the data-type for "asid" member of vhost_msg_v2 to __u32 > to accommodate PASID > - Fixed the buildbot warnings > - Resolved all checkpatch.pl errors and warnings > - Tested both control and datapath with Xilinx Smartnic SN1000 series > device using QEMU implementing the Shadow virtqueue and support for > VQ groups and ASID available at [1] > > Changes since RFC: > > - tweak vhost uAPI documentation > - switch to use device specific IOTLB really in patch 4 > - tweak the commit log > - fix that ASID in vhost is claimed to be 32 actually but 16bit > actually > - fix use after free when using ASID with IOTLB batching requests > - switch to use Stefano's patch for having separated iov > - remove unused "used_as" variable > - fix the iotlb/asid checking in vhost_vdpa_unmap() > > [1] Development QEMU release with support for SVQ, VQ groups and ASID: > github.com/eugpermar/qemu/releases/tag/vdpa_sw_live_migration.d%2F > asid_groups-v1.d%2F00 > > Thanks > > Gautam Dawar (19): > vhost: move the backend feature bits to vhost_types.h > virtio-vdpa: don't set callback if virtio doesn't need it > vhost-vdpa: passing iotlb to IOMMU mapping helpers > vhost-vdpa: switch to use vhost-vdpa specific IOTLB > vdpa: introduce virtqueue groups > vdpa: multiple address spaces support > vdpa: introduce config operations for associating ASID to a virtqueue > group > vhost_iotlb: split out IOTLB initialization > vhost: support ASID in IOTLB API > vhost-vdpa: introduce asid based IOTLB > vhost-vdpa: introduce uAPI to get the number of virtqueue groups > vhost-vdpa: introduce uAPI to get the number of address spaces > vhost-vdpa: uAPI to get virtqueue group id > vhost-vdpa: introduce uAPI to set group ASID > vhost-vdpa: support ASID based IOTLB API > vdpa_sim: advertise VIRTIO_NET_F_MTU > vdpa_sim: factor out buffer completion logic > vdpa_sim: filter destination mac address > vdpasim: control virtqueue support > > drivers/vdpa/alibaba/eni_vdpa.c | 2 +- > drivers/vdpa/ifcvf/ifcvf_main.c | 8 +- > drivers/vdpa/mlx5/net/mlx5_vnet.c | 11 +- > drivers/vdpa/vdpa.c | 5 + > drivers/vdpa/vdpa_sim/vdpa_sim.c | 100 ++++++++-- > drivers/vdpa/vdpa_sim/vdpa_sim.h | 3 + > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 169 +++++++++++++---- > drivers/vdpa/vdpa_user/vduse_dev.c | 3 +- > drivers/vdpa/virtio_pci/vp_vdpa.c | 2 +- > drivers/vhost/iotlb.c | 23 ++- > drivers/vhost/vdpa.c | 267 +++++++++++++++++++++------ > drivers/vhost/vhost.c | 23 ++- > drivers/vhost/vhost.h | 4 +- > drivers/virtio/virtio_vdpa.c | 2 +- > include/linux/vdpa.h | 44 ++++- > include/linux/vhost_iotlb.h | 2 + > include/uapi/linux/vhost.h | 26 ++- > include/uapi/linux/vhost_types.h | 11 +- > 18 files changed, 563 insertions(+), 142 deletions(-) > Hoping it's not too late for this, but I tested this series with my latest qemu CVQ SVQ RFC (v8). So, in that regard, Reviewed-by: Eugenio Pérez <eperezma@xxxxxxxxxx>
