From: Nico Boehr <nrb@xxxxxxxxxxxxx>
Add a basic migration test for s390x. This tests the guarded-storage
registers and vector registers are preserved on migration.
Check for the respective facilities. Since it is possible neither
guarded-storage nor vector are there, add an additional report_pass()
such that least one PASS is reported.
Signed-off-by: Nico Boehr <nrb@xxxxxxxxxxxxx>
Reviewed-by: Thomas Huth <thuth@xxxxxxxxxx>
Reviewed-by: Claudio Imbrenda <imbrenda@xxxxxxxxxxxxx>
Signed-off-by: Claudio Imbrenda <imbrenda@xxxxxxxxxxxxx>
---
s390x/Makefile | 1 +
s390x/migration.c | 198 ++++++++++++++++++++++++++++++++++++++++++++
s390x/unittests.cfg | 5 ++
3 files changed, 204 insertions(+)
create mode 100644 s390x/migration.c
diff --git a/s390x/Makefile b/s390x/Makefile
index f38f442b..5336ed8a 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -30,6 +30,7 @@ tests += $(TEST_DIR)/spec_ex-sie.elf
tests += $(TEST_DIR)/firq.elf
tests += $(TEST_DIR)/epsw.elf
tests += $(TEST_DIR)/adtl-status.elf
+tests += $(TEST_DIR)/migration.elf
pv-tests += $(TEST_DIR)/pv-diags.elf
diff --git a/s390x/migration.c b/s390x/migration.c
new file mode 100644
index 00000000..a4529637
--- /dev/null
+++ b/s390x/migration.c
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Migration Test for s390x
+ *
+ * Copyright IBM Corp. 2022
+ *
+ * Authors:
+ * Nico Boehr <nrb@xxxxxxxxxxxxx>
+ */
+#include <libcflat.h>
+#include <asm/arch_def.h>
+#include <asm/vector.h>
+#include <asm/barrier.h>
+#include <asm/facility.h>
+#include <gs.h>
+#include <bitops.h>
+#include <smp.h>
+
+static struct gs_cb gs_cb;
+static struct gs_epl gs_epl;
+
+/* set by CPU1 to signal it has completed */
+static int flag_thread_complete;
+/* set by CPU0 to signal migration has completed */
+static int flag_migration_complete;
+
+static void write_gs_regs(void)
+{
+ const unsigned long gs_area = 0x2000000;
+ const unsigned long gsc = 25; /* align = 32 M, section size = 512K */
+
+ gs_cb.gsd = gs_area | gsc;
+ gs_cb.gssm = 0xfeedc0ffe;
+ gs_cb.gs_epl_a = (uint64_t) &gs_epl;
+
+ load_gs_cb(&gs_cb);
+}
+
+static void check_gs_regs(void)
+{
+ struct gs_cb gs_cb_after_migration;
+
+ store_gs_cb(&gs_cb_after_migration);
+
+ report_prefix_push("guarded-storage registers");
+
+ report(gs_cb_after_migration.gsd == gs_cb.gsd, "gsd matches");
+ report(gs_cb_after_migration.gssm == gs_cb.gssm, "gssm matches");
+ report(gs_cb_after_migration.gs_epl_a == gs_cb.gs_epl_a, "gs_epl_a matches");
+
+ report_prefix_pop();
+}
+
+static bool have_vector_facility(void)
+{
+ return test_facility(129);
+}
+
+static bool have_guarded_storage_facility(void)
+{
+ return test_facility(133);
+}
+
+static void test_func(void)
+{
+ uint8_t expected_vec_contents[VEC_REGISTER_NUM][VEC_REGISTER_SIZE];
+ uint8_t actual_vec_contents[VEC_REGISTER_NUM][VEC_REGISTER_SIZE];
+ uint8_t *vec_reg;
+ int i;
+ int vec_result = 0;
+
+ if (have_guarded_storage_facility()) {
+ ctl_set_bit(2, CTL2_GUARDED_STORAGE);
+
+ write_gs_regs();
+ }
+
+ if (have_vector_facility()) {
+ for (i = 0; i < VEC_REGISTER_NUM; i++) {
+ vec_reg = &expected_vec_contents[i][0];
+ /* i+1 to avoid zero content */
+ memset(vec_reg, i + 1, VEC_REGISTER_SIZE);
+ }
+
+ ctl_set_bit(0, CTL0_VECTOR);
+
+ /*
+ * It is important loading the vector/floating point registers and
+ * comparing their contents occurs in the same inline assembly block.
+ * Otherwise, the compiler is allowed to re-use the registers for
+ * something else in between.
+ * For this very reason, this also runs on a second CPU, so all the
+ * complex console stuff can be done in C on the first CPU and here we
+ * just need to wait for it to set the flag.
+ */
+ asm inline(
+ " .machine z13\n"
+ /* load vector registers: vlm handles at most 16 registers at a time */
+ " vlm 0,15, 0(%[expected_vec_reg])\n"
+ " vlm 16,31, 256(%[expected_vec_reg])\n"
+ /* inform CPU0 we are done, it will request migration */
+ " mvhi %[flag_thread_complete], 1\n"
+ /* wait for migration to finish */
+ "0: clfhsi %[flag_migration_complete], 1\n"
+ " jnz 0b\n"
+ /*
+ * store vector register contents in actual_vec_reg: vstm
+ * handles at most 16 registers at a time
+ */
+ " vstm 0,15, 0(%[actual_vec_reg])\n"
+ " vstm 16,31, 256(%[actual_vec_reg])\n"
+ /*
+ * compare the contents in expected_vec_reg with actual_vec_reg:
+ * clc handles at most 256 bytes at a time
+ */
+ " clc 0(256, %[expected_vec_reg]), 0(%[actual_vec_reg])\n"
+ " jnz 1f\n"
+ " clc 256(256, %[expected_vec_reg]), 256(%[actual_vec_reg])\n"
+ " jnz 1f\n"
+ /* success */
+ " mvhi %[vec_result], 1\n"
+ "1:"
+ :
+ : [expected_vec_reg] "a"(expected_vec_contents),
+ [actual_vec_reg] "a"(actual_vec_contents),
+ [flag_thread_complete] "Q"(flag_thread_complete),
+ [flag_migration_complete] "Q"(flag_migration_complete),
+ [vec_result] "Q"(vec_result)
+ : "v0", "v1", "v2", "v3", "v4", "v5", "v6", "v7", "v8", "v9",
+ "v10", "v11", "v12", "v13", "v14", "v15", "v16", "v17", "v18",
+ "v19", "v20", "v21", "v22", "v23", "v24", "v25", "v26", "v27",
+ "v28", "v29", "v30", "v31", "cc", "memory"
+ );
+
+ report(vec_result, "vector contents match");
+
+ report(stctg(0) & BIT(CTL0_VECTOR), "ctl0 vector bit set");
+
+ ctl_clear_bit(0, CTL0_VECTOR);
+ } else {
+ flag_thread_complete = 1;
+ while(!flag_migration_complete)
+ mb();
+ }
+
+ report_pass("Migrated");
+
+ if (have_guarded_storage_facility()) {
+ check_gs_regs();
+
+ report(stctg(2) & BIT(CTL2_GUARDED_STORAGE), "ctl2 guarded-storage bit set");
+
+ ctl_clear_bit(2, CTL2_GUARDED_STORAGE);
+ }
+
+ flag_thread_complete = 1;
+}
+
+int main(void)
+{
+ struct psw psw;
+
+ /* don't say migrate here otherwise we will migrate right away */
+ report_prefix_push("migration");
+
+ if (smp_query_num_cpus() == 1) {
+ report_skip("need at least 2 cpus for this test");
+ goto done;
+ }
+
+ /* Second CPU does the actual tests */
+ psw.mask = extract_psw_mask();
+ psw.addr = (unsigned long)test_func;
+ smp_cpu_setup(1, psw);
+
+ /* wait for thread setup */
+ while(!flag_thread_complete)
+ mb();
+ flag_thread_complete = 0;
+
+ /* ask migrate_cmd to migrate (it listens for 'migrate') */
+ puts("Please migrate me, then press return\n");
+
+ /* wait for migration to finish, we will read a newline */
+ (void)getchar();
+
+ flag_migration_complete = 1;
+
+ /* wait for thread to complete assertions */
+ while(!flag_thread_complete)
+ mb();
+
+ smp_cpu_destroy(1);
+
+done:
+ report_prefix_pop();
+ return report_summary();
+}
diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
index 256c7169..b456b288 100644
--- a/s390x/unittests.cfg
+++ b/s390x/unittests.cfg
@@ -171,3 +171,8 @@ file = adtl-status.elf
smp = 2
accel = tcg
extra_params = -cpu qemu,gs=off,vx=off
+
+[migration]
+file = migration.elf
+groups = migration
+smp = 2
--
2.36.1
