Re: [PATCH v8 2/2] s390x: KVM: resetting the Topology-Change-Report

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/28/22 15:50, David Hildenbrand wrote:
On 20.04.22 13:34, Pierre Morel wrote:
During a subsystem reset the Topology-Change-Report is cleared.
Let's give userland the possibility to clear the MTCR in the case
of a subsystem reset.

To migrate the MTCR, let's give userland the possibility to
query the MTCR state.

Signed-off-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
---
  arch/s390/include/uapi/asm/kvm.h |   9 +++
  arch/s390/kvm/kvm-s390.c         | 103 +++++++++++++++++++++++++++++++
  2 files changed, 112 insertions(+)

diff --git a/arch/s390/include/uapi/asm/kvm.h b/arch/s390/include/uapi/asm/kvm.h
index 7a6b14874d65..bb3df6d49f27 100644
--- a/arch/s390/include/uapi/asm/kvm.h
+++ b/arch/s390/include/uapi/asm/kvm.h
@@ -74,6 +74,7 @@ struct kvm_s390_io_adapter_req {
  #define KVM_S390_VM_CRYPTO		2
  #define KVM_S390_VM_CPU_MODEL		3
  #define KVM_S390_VM_MIGRATION		4
+#define KVM_S390_VM_CPU_TOPOLOGY	5
/* kvm attributes for mem_ctrl */
  #define KVM_S390_VM_MEM_ENABLE_CMMA	0
@@ -171,6 +172,14 @@ struct kvm_s390_vm_cpu_subfunc {
  #define KVM_S390_VM_MIGRATION_START	1
  #define KVM_S390_VM_MIGRATION_STATUS	2
+/* kvm attributes for cpu topology */
+#define KVM_S390_VM_CPU_TOPO_MTR_CLEAR	0
+#define KVM_S390_VM_CPU_TOPO_MTR_SET	1
+
+struct kvm_s390_cpu_topology {
+	__u16 mtcr;
+};

Just wondering:

1) Do we really need a struct for that
2) Do we want to leave some room for later expansion?

Yes it is the goal, if we want to report more topology information for the case the vCPUs are not pin on the real CPUs. In this case I think we need to report more information on the vCPU topology to the guest.
For now I explicitly limited the case to pinned vCPUs.

But the change from a u16 to a structure can be done at that moment.


+
  /* for KVM_GET_REGS and KVM_SET_REGS */
  struct kvm_regs {
  	/* general purpose regs for s390 */
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 925ccc59f283..755f325c9e70 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1756,6 +1756,100 @@ static int kvm_s390_sca_set_mtcr(struct kvm *kvm)
  	return 0;
  }
+/**
+ * kvm_s390_sca_clear_mtcr
+ * @kvm: guest KVM description
+ *
+ * Is only relevant if the topology facility is present,
+ * the caller should check KVM facility 11
+ *
+ * Updates the Multiprocessor Topology-Change-Report to signal
+ * the guest with a topology change.
+ */
+static int kvm_s390_sca_clear_mtcr(struct kvm *kvm)
+{
+	struct bsca_block *sca = kvm->arch.sca;
+	struct kvm_vcpu *vcpu;
+	int val;
+
+	vcpu = kvm_s390_get_first_vcpu(kvm);
+	if (!vcpu)
+		return -ENODEV;

It would be cleaner to have ipte_lock/ipte_unlock variants that are
independent of a vcpu.

Instead of checking for "vcpu->arch.sie_block->eca & ECA_SII" we might
just check for sclp.has_siif. Everything else that performs the
lock/unlock should be contained in "struct kvm" directly, unless I am
missing something.

No you are right, ipte_lock/unlock are independent of the vcpu.
I already had a patch on this but I did not think about sclp.has_siif and it was still heavy.


[...]

+
+static int kvm_s390_get_topology(struct kvm *kvm, struct kvm_device_attr *attr)
+{
+	struct kvm_s390_cpu_topology *topology;
+	int ret = 0;
+
+	if (!test_kvm_facility(kvm, 11))
+		return -ENXIO;
+
+	topology = kzalloc(sizeof(*topology), GFP_KERNEL);
+	if (!topology)
+		return -ENOMEM;

I'm confused. We're allocating a __u16 to then free it again below? Why
not simply use a value on the stack like in kvm_s390_vm_get_migration()?

comes from the idea to bring up more information.
But done like this it has no point.





u16 mtcr;
...
mtcr = kvm_s390_sca_get_mtcr(kvm);

if (copy_to_user((void __user *)attr->addr, &mtcr, sizeof(mtcr)))
	return -EFAULT;
return 0;

yes, thanks.




+
+	topology->mtcr =  kvm_s390_sca_get_mtcr(kvm);

s/  / /

yes too


+	if (copy_to_user((void __user *)attr->addr, topology,
+			 sizeof(struct kvm_s390_cpu_topology)))
+		ret = -EFAULT;
+
+	kfree(topology);
+	return ret;
+}
+




Thanks a lot David,

Regards,
Pierre

--
Pierre Morel
IBM Lab Boeblingen



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux