[PATCH v6 00/21] KVM: s390: enable zPCI for interpretive execution

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable interpretive execution of zPCI instructions + adapter interruption
forwarding for s390x KVM vfio-pci.  This is done by triggering a routine
when the VFIO group is associated with the KVM guest, transmitting to
firmware a special token (GISA designation) to enable that specific guest
for interpretive execution on that zPCI device.  Load/store interpreation
enablement is then controlled by userspace (based upon whether or not a
SHM bit is placed in the virtual function handle).  Adapter Event
Notification interpretation is controlled from userspace via a new KVM
ioctl.

By allowing intepretation of zPCI instructions and firmware delivery of
interrupts to guests, we can reduce the frequency of guest SIE exits for
zPCI.  

>From the perspective of guest configuration, you passthrough zPCI devices
in the same manner as before, with intepretation support being used by
default if available in kernel+qemu.

Some minor changes are already suggested for the QEMU series, but for
now the v5 one is still compatible:

https://lore.kernel.org/kvm/20220404181726.60291-1-mjrosato@xxxxxxxxxxxxx/

Changelog v5->v6:                                                               
- Add more R-b tags                                                             
- Address a leak of aift during rmmod kvm (Christian) also destroy the          
  associated mutex at this time                                                 
- only need to check nisc match during 2nd insmod of kvm (Pierre)               
- Register for kvm notifier in vfio_pci_zdev open_device, use this to           
  trigger GISA (un)registration instead of via iommu_group_for_each_dev         
  from virt/kvm/vfio.c (Jason)                                                  
- Since we now always enable the interpretation facilities once a               
  passthrough PCI device is detected, let's just set the ECB during             
  init vm -- SHM bits will always be used to override load/store                
  interpretation                                                                
- Still using KVM_S390_ZPCI_OP for AEN setup/teardown; we can continue          
  to discuss alternatives if it makes sense, but wanted to update the           
  rest of the series so review can continue.   

Matthew Rosato (21):
  s390/sclp: detect the zPCI load/store interpretation facility
  s390/sclp: detect the AISII facility
  s390/sclp: detect the AENI facility
  s390/sclp: detect the AISI facility
  s390/airq: pass more TPI info to airq handlers
  s390/airq: allow for airq structure that uses an input vector
  s390/pci: externalize the SIC operation controls and routine
  s390/pci: stash associated GISA designation
  s390/pci: stash dtsm and maxstbl
  KVM: s390: pci: add basic kvm_zdev structure
  KVM: s390: pci: do initial setup for AEN interpretation
  KVM: s390: pci: enable host forwarding of Adapter Event Notifications
  KVM: s390: mechanism to enable guest zPCI Interpretation
  KVM: s390: pci: provide routines for enabling/disabling interrupt
    forwarding
  KVM: s390: pci: add routines to start/stop interpretive execution
  vfio-pci/zdev: add open/close device hooks
  vfio-pci/zdev: add function handle to clp base capability
  vfio-pci/zdev: different maxstbl for interpreted devices
  KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices
  KVM: s390: introduce CPU feature for zPCI Interpretation
  MAINTAINERS: additional files related kvm s390 pci passthrough

 Documentation/virt/kvm/api.rst   |  45 +++
 MAINTAINERS                      |   1 +
 arch/s390/include/asm/airq.h     |   7 +-
 arch/s390/include/asm/kvm_host.h |  18 +
 arch/s390/include/asm/pci.h      |  12 +
 arch/s390/include/asm/pci_clp.h  |   9 +-
 arch/s390/include/asm/pci_insn.h |  29 +-
 arch/s390/include/asm/sclp.h     |   4 +
 arch/s390/include/asm/tpi.h      |  13 +
 arch/s390/include/uapi/asm/kvm.h |   1 +
 arch/s390/kvm/Makefile           |   1 +
 arch/s390/kvm/interrupt.c        |  95 ++++-
 arch/s390/kvm/kvm-s390.c         |  87 +++-
 arch/s390/kvm/kvm-s390.h         |  10 +
 arch/s390/kvm/pci.c              | 667 +++++++++++++++++++++++++++++++
 arch/s390/kvm/pci.h              |  87 ++++
 arch/s390/pci/pci.c              |  15 +
 arch/s390/pci/pci_clp.c          |   7 +
 arch/s390/pci/pci_insn.c         |   4 +-
 arch/s390/pci/pci_irq.c          |  48 ++-
 drivers/s390/char/sclp_early.c   |   4 +
 drivers/s390/cio/airq.c          |  12 +-
 drivers/s390/cio/qdio_thinint.c  |   6 +-
 drivers/s390/crypto/ap_bus.c     |   9 +-
 drivers/s390/virtio/virtio_ccw.c |   6 +-
 drivers/vfio/pci/vfio_pci_core.c |   2 +
 drivers/vfio/pci/vfio_pci_zdev.c |  61 ++-
 include/linux/vfio_pci_core.h    |  10 +
 include/uapi/linux/kvm.h         |  31 ++
 include/uapi/linux/vfio_zdev.h   |   7 +
 30 files changed, 1256 insertions(+), 52 deletions(-)
 create mode 100644 arch/s390/kvm/pci.c
 create mode 100644 arch/s390/kvm/pci.h

-- 
2.27.0




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux