On 4/5/22 9:49 PM, Kai Huang wrote:
TDX supports shutting down the TDX module at any time during its
lifetime. After TDX module is shut down, no further SEAMCALL can be
made on any logical cpu.
Shut down the TDX module in case of any error happened during the
initialization process. It's pointless to leave the TDX module in some
middle state.
Shutting down the TDX module requires calling TDH.SYS.LP.SHUTDOWN on all
May be adding specification reference will help.
BIOS-enabled cpus, and the SEMACALL can run concurrently on different
cpus. Implement a mechanism to run SEAMCALL concurrently on all online
From TDX Module spec, sec 13.4.1 titled "Shutdown Initiated by the Host
VMM (as Part of Module Update)",
TDH.SYS.LP.SHUTDOWN is designed to set state variables to block all
SEAMCALLs on the current LP and all SEAMCALL leaf functions except
TDH.SYS.LP.SHUTDOWN on the other LPs.
As per above spec reference, executing TDH.SYS.LP.SHUTDOWN in
one LP prevent all SEAMCALL leaf function on all other LPs. If so,
why execute it on all CPUs?
cpus. Logical-cpu scope initialization will use it too.
Concurrent SEAMCALL support seem to be useful for other SEAMCALL
types as well. If you agree, I think it would be better if you move
it out to a separate common patch.
Signed-off-by: Kai Huang <kai.huang@xxxxxxxxx>
---
arch/x86/virt/vmx/tdx/tdx.c | 40 ++++++++++++++++++++++++++++++++++++-
arch/x86/virt/vmx/tdx/tdx.h | 5 +++++
2 files changed, 44 insertions(+), 1 deletion(-)
diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index 674867bccc14..faf8355965a5 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -11,6 +11,8 @@
#include <linux/cpumask.h>
#include <linux/mutex.h>
#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/atomic.h>
#include <asm/msr-index.h>
#include <asm/msr.h>
#include <asm/cpufeature.h>
@@ -328,6 +330,39 @@ static int seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
return 0;
}
+/* Data structure to make SEAMCALL on multiple CPUs concurrently */
+struct seamcall_ctx {
+ u64 fn;
+ u64 rcx;
+ u64 rdx;
+ u64 r8;
+ u64 r9;
+ atomic_t err;
+ u64 seamcall_ret;
+ struct tdx_module_output out;
+};
+
+static void seamcall_smp_call_function(void *data)
+{
+ struct seamcall_ctx *sc = data;
+ int ret;
+
+ ret = seamcall(sc->fn, sc->rcx, sc->rdx, sc->r8, sc->r9,
+ &sc->seamcall_ret, &sc->out);
+ if (ret)
+ atomic_set(&sc->err, ret);
+}
+
+/*
+ * Call the SEAMCALL on all online cpus concurrently.
+ * Return error if SEAMCALL fails on any cpu.
+ */
+static int seamcall_on_each_cpu(struct seamcall_ctx *sc)
+{
+ on_each_cpu(seamcall_smp_call_function, sc, true);
+ return atomic_read(&sc->err);
+}
+
static inline bool p_seamldr_ready(void)
{
return !!p_seamldr_info.p_seamldr_ready;
@@ -437,7 +472,10 @@ static int init_tdx_module(void)
static void shutdown_tdx_module(void)
{
- /* TODO: Shut down the TDX module */
+ struct seamcall_ctx sc = { .fn = TDH_SYS_LP_SHUTDOWN };
+
+ seamcall_on_each_cpu(&sc);
May be check the error and WARN_ON on failure?
+
tdx_module_status = TDX_MODULE_SHUTDOWN;
}
diff --git a/arch/x86/virt/vmx/tdx/tdx.h b/arch/x86/virt/vmx/tdx/tdx.h
index 6990c93198b3..dcc1f6dfe378 100644
--- a/arch/x86/virt/vmx/tdx/tdx.h
+++ b/arch/x86/virt/vmx/tdx/tdx.h
@@ -35,6 +35,11 @@ struct p_seamldr_info {
#define P_SEAMLDR_SEAMCALL_BASE BIT_ULL(63)
#define P_SEAMCALL_SEAMLDR_INFO (P_SEAMLDR_SEAMCALL_BASE | 0x0)
+/*
+ * TDX module SEAMCALL leaf functions
+ */
+#define TDH_SYS_LP_SHUTDOWN 44
+
struct tdx_module_output;
u64 __seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
struct tdx_module_output *out);
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
