PCIe defines a 'no-snoop' bit in each the TLP which is usually implemented by a platform as bypassing elements in the DMA coherent CPU cache hierarchy. A driver can command a device to set this bit on some of its transactions as a micro-optimization. However, the driver is now responsible to synchronize the CPU cache with the DMA that bypassed it. On x86 this may be done through the wbinvd instruction, and the i915 GPU driver is the only Linux DMA driver that calls it. The problem comes that KVM on x86 will normally disable the wbinvd instruction in the guest and render it a NOP. As the driver running in the guest is not aware the wbinvd doesn't work it may still cause the device to set the no-snoop bit and the platform will bypass the CPU cache. Without a working wbinvd there is no way to re-synchronize the CPU cache and the driver in the VM has data corruption. Thus, we see a general direction on x86 that the IOMMU HW is able to block the no-snoop bit in the TLP. This NOP's the optimization and allows KVM to to NOP the wbinvd without causing any data corruption. This control for Intel IOMMU was exposed by using IOMMU_CACHE and IOMMU_CAP_CACHE_COHERENCY, however these two values now have multiple meanings and usages beyond blocking no-snoop and the whole thing has become confused. AMD IOMMU has the same feature and same IOPTE bits however it unconditionally blocks no-snoop. Change it so that: - IOMMU_CACHE is only about the DMA coherence of normal DMAs from a device. It is used by the DMA API/VFIO/etc when the user of the iommu_domain will not be doing manual cache coherency operations. - IOMMU_CAP_CACHE_COHERENCY indicates if IOMMU_CACHE can be used with the device. - The new optional domain op enforce_cache_coherency() will cause the entire domain to block no-snoop requests - ie there is no way for any device attached to the domain to opt out of the IOMMU_CACHE behavior. This is permanent on the domain and must apply to any future devices attached to it. Ideally an iommu driver should implement enforce_cache_coherency() so that DMA API domains allow the no-snoop optimization. This leaves it available to kernel drivers like i915. VFIO will call enforce_cache_coherency() before establishing any mappings and the domain should then permanently block no-snoop. If enforce_cache_coherency() fails VFIO will communicate back through to KVM into the arch code via kvm_arch_register_noncoherent_dma() (only implemented by x86) which triggers a working wbinvd to be made available to the VM. While other iommu drivers are certainly welcome to implement enforce_cache_coherency(), it is not clear there is any benefit in doing so right now. This is on github: https://github.com/jgunthorpe/linux/commits/intel_no_snoop Joerg, I think we are ready with this now - if there are no futher comments I won't resend it unless there is some conflict with rc3. Thanks everyone! v3: - Rename dmar_domain->enforce_no_snoop to dmar_domain->force_snooping - Accumulate acks - Rebase to 5.18-rc2 - Revise commit language v2: https://lore.kernel.org/r/0-v2-f090ae795824+6ad-intel_no_snoop_jgg@xxxxxxxxxx - Abandon removing IOMMU_CAP_CACHE_COHERENCY - instead make it the cap flag that indicates IOMMU_CACHE is supported - Put the VFIO tests for IOMMU_CACHE at VFIO device registration - In the Intel driver remove the domain->iommu_snooping value, this is global not per-domain v1: https://lore.kernel.org/r/0-v1-ef02c60ddb76+12ca2-intel_no_snoop_jgg@xxxxxxxxxx Signed-off-by: Jason Gunthorpe <jgg@xxxxxxxxxx> Jason Gunthorpe (4): iommu: Introduce the domain op enforce_cache_coherency() vfio: Move the Intel no-snoop control off of IOMMU_CACHE iommu: Redefine IOMMU_CAP_CACHE_COHERENCY as the cap flag for IOMMU_CACHE vfio: Require that devices support DMA cache coherence drivers/iommu/amd/iommu.c | 7 +++++++ drivers/iommu/intel/iommu.c | 17 +++++++++++++---- drivers/vfio/vfio.c | 7 +++++++ drivers/vfio/vfio_iommu_type1.c | 30 +++++++++++++++++++----------- include/linux/intel-iommu.h | 2 +- include/linux/iommu.h | 7 +++++-- 6 files changed, 52 insertions(+), 18 deletions(-) base-commit: ce522ba9ef7e2d9fb22a39eb3371c0c64e2a433e -- 2.35.1
