Rename --target-efi to --enable-efi to make it similar to autoconf's
configure script options. Add the --disable-efi option for symmetry and to
make it easy for the option to change from disabled by default to enabled
by default in the future.
Suggested-by: Thomas Huth <thuth@xxxxxxxxxx>
Signed-off-by: Alexandru Elisei <alexandru.elisei@xxxxxxx>
---
Makefile | 6 +++---
configure | 19 +++++++++++--------
lib/x86/acpi.c | 4 ++--
lib/x86/amd_sev.h | 4 ++--
lib/x86/asm/page.h | 8 ++++----
lib/x86/asm/setup.h | 4 ++--
lib/x86/setup.c | 4 ++--
lib/x86/vm.c | 12 ++++++------
scripts/runtime.bash | 4 ++--
x86/Makefile.common | 6 +++---
x86/Makefile.x86_64 | 6 +++---
x86/access_test.c | 2 +-
x86/efi/README.md | 2 +-
x86/efi/run | 2 +-
x86/run | 4 ++--
15 files changed, 45 insertions(+), 42 deletions(-)
diff --git a/Makefile b/Makefile
index 5af17f129ced..24686dddb4fd 100644
--- a/Makefile
+++ b/Makefile
@@ -39,9 +39,9 @@ LIBFDT_archive = $(LIBFDT_objdir)/libfdt.a
OBJDIRS += $(LIBFDT_objdir)
# EFI App
-ifeq ($(TARGET_EFI),y)
+ifeq ($(CONFIG_EFI),y)
EFI_ARCH = x86_64
-EFI_CFLAGS := -DTARGET_EFI
+EFI_CFLAGS := -DCONFIG_EFI
# The following CFLAGS and LDFLAGS come from:
# - GNU-EFI/Makefile.defaults
# - GNU-EFI/apps/Makefile
@@ -81,7 +81,7 @@ COMMON_CFLAGS += $(fno_stack_protector)
COMMON_CFLAGS += $(fno_stack_protector_all)
COMMON_CFLAGS += $(wno_frame_address)
COMMON_CFLAGS += $(if $(U32_LONG_FMT),-D__U32_LONG_FMT__,)
-ifeq ($(TARGET_EFI),y)
+ifeq ($(CONFIG_EFI),y)
COMMON_CFLAGS += $(EFI_CFLAGS)
else
COMMON_CFLAGS += $(fno_pic) $(no_pie)
diff --git a/configure b/configure
index 6620e78ec09c..6b5229b91cbb 100755
--- a/configure
+++ b/configure
@@ -29,7 +29,7 @@ host_key_document=
gen_se_header=
page_size=
earlycon=
-target_efi=
+efi=
usage() {
cat <<-EOF
@@ -74,7 +74,7 @@ usage() {
pl011,mmio32,ADDR
Specify a PL011 compatible UART at address ADDR. Supported
register stride is 32 bit only.
- --target-efi Boot and run from UEFI (x86_64 only)
+ --[enable|disable]-efi Boot and run from UEFI (disabled by default, x86_64 only)
EOF
exit 1
}
@@ -142,8 +142,11 @@ while [[ "$1" = -* ]]; do
--earlycon)
earlycon="$arg"
;;
- --target-efi)
- target_efi=y
+ --enable-efi)
+ efi=y
+ ;;
+ --disable-efi)
+ efi=n
;;
--help)
usage
@@ -177,8 +180,8 @@ else
fi
fi
-if [ "$target_efi" ] && [ "$arch" != "x86_64" ]; then
- echo "--target-efi is not supported for $arch"
+if [ "$efi" ] && [ "$arch" != "x86_64" ]; then
+ echo "--[enable|disable]-efi is not supported for $arch"
usage
fi
@@ -278,7 +281,7 @@ if [ -f "$srcdir/$testdir/run" ]; then
fi
testsubdir=$testdir
-if [ -n "$target_efi" ]; then
+if [ "$efi" = "y" ]; then
testsubdir=$testdir/efi
fi
@@ -367,7 +370,7 @@ U32_LONG_FMT=$u32_long
WA_DIVIDE=$wa_divide
GENPROTIMG=${GENPROTIMG-genprotimg}
HOST_KEY_DOCUMENT=$host_key_document
-TARGET_EFI=$target_efi
+CONFIG_EFI=$efi
GEN_SE_HEADER=$gen_se_header
EOF
if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
diff --git a/lib/x86/acpi.c b/lib/x86/acpi.c
index 1a82ced0b90f..de275caf3146 100644
--- a/lib/x86/acpi.c
+++ b/lib/x86/acpi.c
@@ -1,7 +1,7 @@
#include "libcflat.h"
#include "acpi.h"
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
struct rsdp_descriptor *efi_rsdp = NULL;
void set_efi_rsdp(struct rsdp_descriptor *rsdp)
@@ -34,7 +34,7 @@ static struct rsdp_descriptor *get_rsdp(void)
return rsdp;
}
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
void* find_acpi_table_addr(u32 sig)
{
diff --git a/lib/x86/amd_sev.h b/lib/x86/amd_sev.h
index 6a10f845daba..ed6e3385340c 100644
--- a/lib/x86/amd_sev.h
+++ b/lib/x86/amd_sev.h
@@ -12,7 +12,7 @@
#ifndef _X86_AMD_SEV_H_
#define _X86_AMD_SEV_H_
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
#include "libcflat.h"
#include "desc.h"
@@ -58,6 +58,6 @@ void setup_ghcb_pte(pgd_t *page_table);
unsigned long long get_amd_sev_c_bit_mask(void);
unsigned long long get_amd_sev_addr_upperbound(void);
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
#endif /* _X86_AMD_SEV_H_ */
diff --git a/lib/x86/asm/page.h b/lib/x86/asm/page.h
index c25bc66b7aa4..298e7e8efb57 100644
--- a/lib/x86/asm/page.h
+++ b/lib/x86/asm/page.h
@@ -25,11 +25,11 @@ typedef unsigned long pgd_t;
#define LARGE_PAGE_SIZE (1024 * PAGE_SIZE)
#endif
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
/* lib/x86/amd_sev.c */
extern unsigned long long get_amd_sev_c_bit_mask(void);
extern unsigned long long get_amd_sev_addr_upperbound(void);
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
#define PT_PRESENT_MASK (1ull << 0)
#define PT_WRITABLE_MASK (1ull << 1)
@@ -47,11 +47,11 @@ extern unsigned long long get_amd_sev_addr_upperbound(void);
*/
#define PT_ADDR_UPPER_BOUND_DEFAULT (51)
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
#define PT_ADDR_UPPER_BOUND (get_amd_sev_addr_upperbound())
#else
#define PT_ADDR_UPPER_BOUND (PT_ADDR_UPPER_BOUND_DEFAULT)
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
#define PT_ADDR_LOWER_BOUND (PAGE_SHIFT)
#define PT_ADDR_MASK GENMASK_ULL(PT_ADDR_UPPER_BOUND, PT_ADDR_LOWER_BOUND)
diff --git a/lib/x86/asm/setup.h b/lib/x86/asm/setup.h
index dbfb2a22bc1b..24d4fa9dc76a 100644
--- a/lib/x86/asm/setup.h
+++ b/lib/x86/asm/setup.h
@@ -3,7 +3,7 @@
unsigned long setup_tss(u8 *stacktop);
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
#include "x86/acpi.h"
#include "x86/apic.h"
#include "x86/processor.h"
@@ -14,6 +14,6 @@ unsigned long setup_tss(u8 *stacktop);
efi_status_t setup_efi(efi_bootinfo_t *efi_bootinfo);
void setup_5level_page_table(void);
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
#endif /* _X86_ASM_SETUP_H_ */
diff --git a/lib/x86/setup.c b/lib/x86/setup.c
index bbd34682b79e..38893eddef96 100644
--- a/lib/x86/setup.c
+++ b/lib/x86/setup.c
@@ -167,7 +167,7 @@ void setup_multiboot(struct mbi_bootinfo *bi)
initrd_size = mods->end - mods->start;
}
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
/* From x86/efi/efistart64.S */
extern void load_idt(void);
@@ -330,7 +330,7 @@ efi_status_t setup_efi(efi_bootinfo_t *efi_bootinfo)
return EFI_SUCCESS;
}
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
void setup_libcflat(void)
{
diff --git a/lib/x86/vm.c b/lib/x86/vm.c
index 56be57be673a..25a4f5fbfe17 100644
--- a/lib/x86/vm.c
+++ b/lib/x86/vm.c
@@ -26,9 +26,9 @@ pteval_t *install_pte(pgd_t *cr3,
pt_page = 0;
memset(new_pt, 0, PAGE_SIZE);
pt[offset] = virt_to_phys(new_pt) | PT_PRESENT_MASK | PT_WRITABLE_MASK | pte_opt_mask;
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
pt[offset] |= get_amd_sev_c_bit_mask();
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
}
pt = phys_to_virt(pt[offset] & PT_ADDR_MASK);
}
@@ -98,18 +98,18 @@ pteval_t *get_pte_level(pgd_t *cr3, void *virt, int pte_level)
pteval_t *install_large_page(pgd_t *cr3, phys_addr_t phys, void *virt)
{
phys_addr_t flags = PT_PRESENT_MASK | PT_WRITABLE_MASK | pte_opt_mask | PT_PAGE_SIZE_MASK;
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
flags |= get_amd_sev_c_bit_mask();
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
return install_pte(cr3, 2, virt, phys | flags, 0);
}
pteval_t *install_page(pgd_t *cr3, phys_addr_t phys, void *virt)
{
phys_addr_t flags = PT_PRESENT_MASK | PT_WRITABLE_MASK | pte_opt_mask;
-#ifdef TARGET_EFI
+#ifdef CONFIG_EFI
flags |= get_amd_sev_c_bit_mask();
-#endif /* TARGET_EFI */
+#endif /* CONFIG_EFI */
return install_pte(cr3, 1, virt, phys | flags, 0);
}
diff --git a/scripts/runtime.bash b/scripts/runtime.bash
index 6d5fced94246..b4771f9c0e28 100644
--- a/scripts/runtime.bash
+++ b/scripts/runtime.bash
@@ -82,7 +82,7 @@ function run()
local accel="$8"
local timeout="${9:-$TIMEOUT}" # unittests.cfg overrides the default
- if [ "${TARGET_EFI}" == "y" ]; then
+ if [ "${CONFIG_EFI}" == "y" ]; then
kernel=$(basename $kernel .flat)
fi
@@ -132,7 +132,7 @@ function run()
last_line=$(premature_failure > >(tail -1)) && {
skip=true
- if [ "${TARGET_EFI}" == "y" ] && [[ "${last_line}" =~ "enabling apic" ]]; then
+ if [ "${CONFIG_EFI}" == "y" ] && [[ "${last_line}" =~ "enabling apic" ]]; then
skip=false
fi
if [ ${skip} == true ]; then
diff --git a/x86/Makefile.common b/x86/Makefile.common
index ff02d9822321..b90398829e7b 100644
--- a/x86/Makefile.common
+++ b/x86/Makefile.common
@@ -22,7 +22,7 @@ cflatobjs += lib/x86/acpi.o
cflatobjs += lib/x86/stack.o
cflatobjs += lib/x86/fault_test.o
cflatobjs += lib/x86/delay.o
-ifeq ($(TARGET_EFI),y)
+ifeq ($(CONFIG_EFI),y)
cflatobjs += lib/x86/amd_sev.o
cflatobjs += lib/efi.o
cflatobjs += x86/efi/reloc_x86_64.o
@@ -44,7 +44,7 @@ KEEP_FRAME_POINTER := y
FLATLIBS = lib/libcflat.a
-ifeq ($(TARGET_EFI),y)
+ifeq ($(CONFIG_EFI),y)
.PRECIOUS: %.efi %.so
%.so: %.o $(FLATLIBS) $(SRCDIR)/x86/efi/elf_x86_64_efi.lds $(cstart.o)
@@ -89,7 +89,7 @@ tests-common = $(TEST_DIR)/vmexit.$(exe) $(TEST_DIR)/tsc.$(exe) \
# The following test cases are disabled when building EFI tests because they
# use absolute addresses in their inline assembly code, which cannot compile
# with the '-fPIC' flag
-ifneq ($(TARGET_EFI),y)
+ifneq ($(CONFIG_EFI),y)
tests-common += $(TEST_DIR)/realmode.$(exe)
endif
diff --git a/x86/Makefile.x86_64 b/x86/Makefile.x86_64
index a3cb75ae5868..f18c1e20fd27 100644
--- a/x86/Makefile.x86_64
+++ b/x86/Makefile.x86_64
@@ -1,7 +1,7 @@
cstart.o = $(TEST_DIR)/cstart64.o
bits = 64
ldarch = elf64-x86-64
-ifeq ($(TARGET_EFI),y)
+ifeq ($(CONFIG_EFI),y)
exe = efi
bin = so
FORMAT = efi-app-x86_64
@@ -32,14 +32,14 @@ tests += $(TEST_DIR)/rdpru.$(exe)
tests += $(TEST_DIR)/pks.$(exe)
tests += $(TEST_DIR)/pmu_lbr.$(exe)
-ifeq ($(TARGET_EFI),y)
+ifeq ($(CONFIG_EFI),y)
tests += $(TEST_DIR)/amd_sev.$(exe)
endif
# The following test cases are disabled when building EFI tests because they
# use absolute addresses in their inline assembly code, which cannot compile
# with the '-fPIC' flag
-ifneq ($(TARGET_EFI),y)
+ifneq ($(CONFIG_EFI),y)
tests += $(TEST_DIR)/access_test.$(exe)
tests += $(TEST_DIR)/svm.$(exe)
tests += $(TEST_DIR)/vmx.$(exe)
diff --git a/x86/access_test.c b/x86/access_test.c
index ef1243f0c151..67e9a08081c9 100644
--- a/x86/access_test.c
+++ b/x86/access_test.c
@@ -10,7 +10,7 @@ int main(void)
printf("starting test\n\n");
r = ac_test_run(PT_LEVEL_PML4);
-#ifndef TARGET_EFI
+#ifndef CONFIG_EFI
/*
* Not supported yet for UEFI, because setting up 5
* level page table requires entering real mode.
diff --git a/x86/efi/README.md b/x86/efi/README.md
index a39f509cd9aa..aa1dbcdd405f 100644
--- a/x86/efi/README.md
+++ b/x86/efi/README.md
@@ -15,7 +15,7 @@ The following dependencies should be installed:
To build:
- ./configure --target-efi
+ ./configure --enable-efi
make
### Run test cases with UEFI
diff --git a/x86/efi/run b/x86/efi/run
index ac368a59ba9f..322cb7567fdc 100755
--- a/x86/efi/run
+++ b/x86/efi/run
@@ -8,7 +8,7 @@ if [ $# -eq 0 ]; then
fi
if [ ! -f config.mak ]; then
- echo "run './configure --target-efi && make' first. See ./configure -h"
+ echo "run './configure --enable-efi && make' first. See ./configure -h"
exit 2
fi
source config.mak
diff --git a/x86/run b/x86/run
index 582d1eda0fd9..4d53b72e8358 100755
--- a/x86/run
+++ b/x86/run
@@ -39,12 +39,12 @@ fi
command="${qemu} --no-reboot -nodefaults $pc_testdev -vnc none -serial stdio $pci_testdev"
command+=" -machine accel=$ACCEL"
-if [ "${TARGET_EFI}" != y ]; then
+if [ "${CONFIG_EFI}" != y ]; then
command+=" -kernel"
fi
command="$(timeout_cmd) $command"
-if [ "${TARGET_EFI}" = y ]; then
+if [ "${CONFIG_EFI}" = y ]; then
# Set ENVIRON_DEFAULT=n to remove '-initrd' flag for QEMU (see
# 'scripts/arch-run.bash' for more details). This is because when using
# UEFI, the test case binaries are passed to QEMU through the disk
--
2.35.1
