Re: [PATCH RESEND v2] KVM: VMX: Dont' send posted IRQ if vCPU == this vCPU and vCPU is IN_GUEST_MODE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/25/22 12:59, Wanpeng Li wrote:
From: Wanpeng Li <wanpengli@xxxxxxxxxxx>

When delivering a virtual interrupt, don't actually send a posted interrupt
if the target vCPU is also the currently running vCPU and is IN_GUEST_MODE,
in which case the interrupt is being sent from a VM-Exit fastpath and the
core run loop in vcpu_enter_guest() will manually move the interrupt from
the PIR to vmcs.GUEST_RVI.  IRQs are disabled while IN_GUEST_MODE, thus
there's no possibility of the virtual interrupt being sent from anything
other than KVM, i.e. KVM won't suppress a wake event from an IRQ handler
(see commit fdba608f15e2, "KVM: VMX: Wake vCPU when delivering posted IRQ
even if vCPU == this vCPU").

Eliding the posted interrupt restores the performance provided by the
combination of commits 379a3c8ee444 ("KVM: VMX: Optimize posted-interrupt
delivery for timer fastpath") and 26efe2fd92e5 ("KVM: VMX: Handle
preemption timer fastpath").

Thanks Sean for better comments.

Suggested-by: Chao Gao <chao.gao@xxxxxxxxx>
Reviewed-by: Sean Christopherson <seanjc@xxxxxxxxxx>
Signed-off-by: Wanpeng Li <wanpengli@xxxxxxxxxxx>
---
  arch/x86/kvm/vmx/vmx.c | 40 +++++++++++++++++++++-------------------
  1 file changed, 21 insertions(+), 19 deletions(-)

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index fe06b02994e6..e06377c9a4cf 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -3908,31 +3908,33 @@ static inline void kvm_vcpu_trigger_posted_interrupt(struct kvm_vcpu *vcpu,
  #ifdef CONFIG_SMP
  	if (vcpu->mode == IN_GUEST_MODE) {
  		/*
-		 * The vector of interrupt to be delivered to vcpu had
-		 * been set in PIR before this function.
+		 * The vector of the virtual has already been set in the PIR.
+		 * Send a notification event to deliver the virtual interrupt
+		 * unless the vCPU is the currently running vCPU, i.e. the
+		 * event is being sent from a fastpath VM-Exit handler, in
+		 * which case the PIR will be synced to the vIRR before
+		 * re-entering the guest.
  		 *
-		 * Following cases will be reached in this block, and
-		 * we always send a notification event in all cases as
-		 * explained below.
+		 * When the target is not the running vCPU, the following
+		 * possibilities emerge:
  		 *
-		 * Case 1: vcpu keeps in non-root mode. Sending a
-		 * notification event posts the interrupt to vcpu.
+		 * Case 1: vCPU stays in non-root mode. Sending a notification
+		 * event posts the interrupt to the vCPU.
  		 *
-		 * Case 2: vcpu exits to root mode and is still
-		 * runnable. PIR will be synced to vIRR before the
-		 * next vcpu entry. Sending a notification event in
-		 * this case has no effect, as vcpu is not in root
-		 * mode.
+		 * Case 2: vCPU exits to root mode and is still runnable. The
+		 * PIR will be synced to the vIRR before re-entering the guest.
+		 * Sending a notification event is ok as the host IRQ handler
+		 * will ignore the spurious event.
  		 *
-		 * Case 3: vcpu exits to root mode and is blocked.
-		 * vcpu_block() has already synced PIR to vIRR and
-		 * never blocks vcpu if vIRR is not cleared. Therefore,
-		 * a blocked vcpu here does not wait for any requested
-		 * interrupts in PIR, and sending a notification event
-		 * which has no effect is safe here.
+		 * Case 3: vCPU exits to root mode and is blocked. vcpu_block()
+		 * has already synced PIR to vIRR and never blocks the vCPU if
+		 * the vIRR is not empty. Therefore, a blocked vCPU here does
+		 * not wait for any requested interrupts in PIR, and sending a
+		 * notification event also results in a benign, spurious event.
  		 */
- apic->send_IPI_mask(get_cpu_mask(vcpu->cpu), pi_vec);
+		if (vcpu != kvm_get_running_vcpu())
+			apic->send_IPI_mask(get_cpu_mask(vcpu->cpu), pi_vec);
  		return;
  	}
  #endif

Queued, thanks.

Paolo




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux