Thanks a lot for all the review comments and guidance! Hope this
version is in a good state now. :)
(Jing is temporarily leave for family reason, Yang helped work out
this version)
----
v4->v5:
- Directly call fpu core to expand fpstate buffer in kvm_check_cpuid()
and remove duplicated permission check there (Sean)
- Accordingly remove Thomas's reviewed-by as a different wrapper is
introduced now (patch-7)
- Properly queue #NM exception in nested scenario (Sean)
- Verify non-XFD related #NM usage in nested scenario (Sean)
- Hide XFD in kvm_cpu_cap on 32bit host kernels (Sean)
- Use xstate_required_size() in KVM_CAP_XSAVE2 which may be called
before any vcpu is created (Sean/Paolo)
- Replace boot_cpu_has with kvm_cpu_cap_has when disabling RDMSR
interception for xfd_err (Sean)
v3->v4:
- Verify kvm selftest for AMX (Paolo)
- Expand fpstate buffer in kvm_check_cpuid() and improve patch
description (Sean)
- Drop 'preemption' word in #NM interception patch (Sean)
- Remove 'trap_nm' flag. Replace it by: (Sean)
* Trapping #NM according to guest_fpu::xfd when write to xfd is
intercepted.
* Always trapping #NM when xfd write interception is disabled
- Use better name for #NM related functions (Sean)
- Drop '#ifdef CONFIG_X86_64' in __kvm_set_xcr (Sean)
- Update description for KVM_CAP_XSAVE2 and prevent the guest from
using the wrong ioctl (Sean)
- Replace 'xfd_out_of_sync' with a better name (Sean)
v2->v3:
- Trap #NM until write IA32_XFD with a non-zero value (Thomas)
- Revise return value in __xstate_request_perm() (Thomas)
- Revise doc for KVM_GET_SUPPORTED_CPUID (Paolo)
- Add Thomas's reviewed-by on one patch
- Reorder disabling read interception of XFD_ERR patch (Paolo)
- Move disabling r/w interception of XFD from x86.c to vmx.c (Paolo)
- Provide the API doc together with the new KVM_GET_XSAVE2 ioctl (Paolo)
- Make KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) return minimum size of struct
kvm_xsave (4K) (Paolo)
- Request permission at the start of vm_create_with_vcpus() in selftest
- Request permission conditionally when XFD is supported (Paolo)
v1->v2:
- Live migration supported and verified with a selftest
- Rebase to Thomas's new series for guest fpstate reallocation [1]
- Expand fpstate at KVM_SET_CPUID2 instead of when emulating XCR0
and IA32_XFD (Thomas/Paolo)
- Accordingly remove all exit-to-userspace stuff
- Intercept #NM to save guest XFD_ERR and restore host/guest value
at preemption on/off boundary (Thomas)
- Accordingly remove all xfd_err logic in preemption callback and
fpu_swap_kvm_fpstate()
- Reuse KVM_SET_XSAVE to handle both legacy and expanded buffer (Paolo)
- Don't return dynamic bits w/o prctl() in KVM_GET_SUPPORTED_CPUID (Paolo)
- Check guest permissions for dynamic features in CPUID[0xD] instead
of only for AMX at KVM_SET_CPUID (Paolo)
- Remove dynamic bit check for 32-bit guest in __kvm_set_xcr() (Paolo)
- Fix CPUID emulation for 0x1d and 0x1e (Paolo)
- Move "disable interception" to the end of the series (Paolo)
This series brings AMX (Advanced Matrix eXtensions) virtualization support to
KVM. The preparatory series from Thomas [1] is also included.
A large portion of the changes in this series is to deal with eXtended Feature
Disable (XFD) which allows resizing of the fpstate buffer to support
dynamically-enabled XSTATE features with large state component (e.g. 8K for AMX).
There are a lot of simplications when comparing v5 to the original proposal [2]
and the first version [3]. Thanks to Thomas, Paolo and Sean for many good
suggestions.
The support is based on following key changes:
- Guest permissions for dynamically-enabled XSAVE features
Native tasks have to request permission via prctl() before touching
a dynamic-resized XSTATE compoenent. Introduce guest permissions
for the similar purpose. Userspace VMM is expected to request guest
permission only once when the first vCPU is created.
KVM checks guest permission in KVM_SET_CPUID2. Setting XFD in guest
cpuid w/o proper permissions fails this operation. In the meantime,
unpermitted features are also excluded in KVM_GET_SUPPORTED_CPUID.
- Extend fpstate reallocation mechanism to cover guest fpu
Unlike native tasks which have reallocation triggered from #NM
handler, guest fpstate reallocation is requested by KVM when it
identifies the intention on using dynamically-enabled XSAVE
features inside guest.
Extend fpu core to allow KVM request fpstate buffer expansion
for a guest fpu containter.
- Trigger fpstate reallocation in KVM
This could be done either before guest runs or until xfd is updated
in the emulation path. According to discussion [1] we decide to
go the former option in KVM_SET_CPUID2, with fpstate buffer sized
accordingly. This spares a lot of code and also avoid imposing an
ordered restore sequence (XCR0, XFD and XSTATE) to userspace VMM.
- RDMSR/WRMSR emulation for IA32_XFD
Because fpstate expansion is completed in KVM_SET_CPUID2, emulating
r/w access to IA32_XFD simply involves the xfd field in the guest
fpu container. If write and guest fpu is currently active, the
software state (guest_fpstate::xfd and per-cpu xfd cache) is also
updated.
- RDMSR/WRMSR emulation for XFD_ERR
When XFD causes an instruction to generate #NM, XFD_ERR contains
information about which disabled state components are being accessed.
It'd be problematic if the XFD_ERR value generated in guest is
consumed/clobbered by the host before the guest itself doing so.
Intercept #NM exception to save the guest XFD_ERR value when write
IA32_XFD with a non-zero value for 1st time. There is at most one
interception per guest task given a dynamic feature.
RDMSR/WRMSR emulation uses the saved value. The host value (always
ZERO outside of the host #NM handler) is restored before enabling
interrupts. The saved guest value is restored right before entering
the guest (with interrupts disabled).
- Get/set dynamic xfeature state for migration
Introduce new capability (KVM_CAP_XSAVE2) to deal with >4KB fpstate
buffer. Reading this capability returns the size of the current
guest fpstate (e.g. after expansion). Userspace VMM uses a new ioctl
(KVM_GET_XSAVE2) to read guest fpstate from the kernel and reuses
the existing ioctl (KVM_SET_XSAVE) to update guest fpsate to the
kernel. KVM_SET_XSAVE is extended to do properly_sized memdup_user()
based on the guest fpstate.
- Expose related cpuid bits to guest
The last step is to allow exposing XFD, AMX_TILE, AMX_INT8 and
AMX_BF16 in guest cpuid. Adding those bits into kvm_cpu_caps finally
activates all previous logics in this series
- Optimization: disable interception for IA32_XFD
IA32_XFD can be frequently updated by the guest, as it is part of
the task state and swapped in context switch when prev and next have
different XFD setting. Always intercepting WRMSR can easily cause
non-negligible overhead.
Disable r/w emulation for IA32_XFD after intercepting the first
WRMSR(IA32_XFD) with a non-zero value. However MSR passthrough
implies the software state (guest_fpstate::xfd and per-cpu xfd
cache) might be out of sync with MSR. This suggests KVM needs to
re-sync them at VM-exit before preemption is enabled.
Thanks Jun Nakajima and Kevin Tian for the design suggestions when this was
being internally worked on.
[1] https://lore.kernel.org/all/20211214022825.563892248@xxxxxxxxxxxxx/
[2] https://www.spinics.net/lists/kvm/msg259015.html
[3] https://lore.kernel.org/lkml/20211208000359.2853257-1-yang.zhong@xxxxxxxxx/
Thanks,
Yang
----
Guang Zeng (1):
kvm: x86: Add support for getting/setting expanded xstate buffer
Jing Liu (11):
kvm: x86: Fix xstate_required_size() to follow XSTATE alignment rule
kvm: x86: Exclude unpermitted xfeatures at KVM_GET_SUPPORTED_CPUID
x86/fpu: Make XFD initialization in __fpstate_reset() a function
argument
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Add CPUID support for Intel AMX
Kevin Tian (2):
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Disable interception for IA32_XFD on demand
Sean Christopherson (1):
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
Thomas Gleixner (5):
x86/fpu: Extend fpu_xstate_prctl() with guest permissions
x86/fpu: Prepare guest FPU for dynamically enabled FPU features
x86/fpu: Add guest support to xfd_enable_feature()
x86/fpu: Add uabi_size to guest_fpu
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
Wei Wang (1):
kvm: selftests: Add support for KVM_CAP_XSAVE2
Documentation/virt/kvm/api.rst | 46 +++++-
arch/x86/include/asm/cpufeatures.h | 2 +
arch/x86/include/asm/fpu/api.h | 11 ++
arch/x86/include/asm/fpu/types.h | 32 ++++
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/include/uapi/asm/kvm.h | 16 +-
arch/x86/include/uapi/asm/prctl.h | 26 ++--
arch/x86/kernel/fpu/core.c | 94 ++++++++++-
arch/x86/kernel/fpu/xstate.c | 147 +++++++++++-------
arch/x86/kernel/fpu/xstate.h | 15 +-
arch/x86/kernel/process.c | 2 +
arch/x86/kvm/cpuid.c | 86 +++++++---
arch/x86/kvm/cpuid.h | 2 +
arch/x86/kvm/vmx/vmcs.h | 5 +
arch/x86/kvm/vmx/vmx.c | 68 ++++++++
arch/x86/kvm/vmx/vmx.h | 2 +-
arch/x86/kvm/x86.c | 112 ++++++++++++-
include/uapi/linux/kvm.h | 4 +
tools/arch/x86/include/uapi/asm/kvm.h | 16 +-
tools/include/uapi/linux/kvm.h | 3 +
.../testing/selftests/kvm/include/kvm_util.h | 2 +
.../selftests/kvm/include/x86_64/processor.h | 10 ++
tools/testing/selftests/kvm/lib/kvm_util.c | 32 ++++
.../selftests/kvm/lib/x86_64/processor.c | 67 +++++++-
.../testing/selftests/kvm/x86_64/evmcs_test.c | 2 +-
tools/testing/selftests/kvm/x86_64/smm_test.c | 2 +-
.../testing/selftests/kvm/x86_64/state_test.c | 2 +-
.../kvm/x86_64/vmx_preemption_timer_test.c | 2 +-
28 files changed, 702 insertions(+), 107 deletions(-)
