RE: [PATCH v2 06/12] target/riscv: Support start kernel directly by KVM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Anup Patel [mailto:anup@xxxxxxxxxxxxxx]
> Sent: Monday, December 13, 2021 12:21 PM
> To: Jiangyifei <jiangyifei@xxxxxxxxxx>
> Cc: QEMU Developers <qemu-devel@xxxxxxxxxx>; open list:RISC-V
> <qemu-riscv@xxxxxxxxxx>; kvm-riscv@xxxxxxxxxxxxxxxxxxx; KVM General
> <kvm@xxxxxxxxxxxxxxx>; libvir-list@xxxxxxxxxx; Anup Patel
> <anup.patel@xxxxxxx>; Palmer Dabbelt <palmer@xxxxxxxxxxx>; Alistair
> Francis <Alistair.Francis@xxxxxxx>; Bin Meng <bin.meng@xxxxxxxxxxxxx>;
> Fanliang (EulerOS) <fanliang@xxxxxxxxxx>; Wubin (H)
> <wu.wubin@xxxxxxxxxx>; Wanghaibin (D) <wanghaibin.wang@xxxxxxxxxx>;
> wanbo (G) <wanbo13@xxxxxxxxxx>; limingwang (A)
> <limingwang@xxxxxxxxxx>
> Subject: Re: [PATCH v2 06/12] target/riscv: Support start kernel directly by KVM
> 
> On Fri, Dec 10, 2021 at 3:37 PM Yifei Jiang <jiangyifei@xxxxxxxxxx> wrote:
> >
> > Get kernel and fdt start address in virt.c, and pass them to KVM when
> > cpu reset. In addition, add kvm_riscv.h to place riscv specific
> > interface.
> >
> > Signed-off-by: Yifei Jiang <jiangyifei@xxxxxxxxxx>
> > Signed-off-by: Mingwang Li <limingwang@xxxxxxxxxx>
> > Reviewed-by: Alistair Francis <alistair.francis@xxxxxxx>
> > ---
> >  hw/riscv/boot.c          | 11 ++++++++
> >  hw/riscv/virt.c          | 54 ++++++++++++++++++++++++++++------------
> >  include/hw/riscv/boot.h  |  1 +
> >  target/riscv/cpu.c       |  8 ++++++
> >  target/riscv/cpu.h       |  3 +++
> >  target/riscv/kvm-stub.c  | 25 +++++++++++++++++++
> >  target/riscv/kvm.c       | 14 +++++++++++
> >  target/riscv/kvm_riscv.h | 24 ++++++++++++++++++
> > target/riscv/meson.build |  2 +-
> >  9 files changed, 125 insertions(+), 17 deletions(-)  create mode
> > 100644 target/riscv/kvm-stub.c  create mode 100644
> > target/riscv/kvm_riscv.h
> >
> > diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c index
> > 519fa455a1..00df6d7810 100644
> > --- a/hw/riscv/boot.c
> > +++ b/hw/riscv/boot.c
> > @@ -317,3 +317,14 @@ void riscv_setup_rom_reset_vec(MachineState
> > *machine, RISCVHartArrayState *harts
> >
> >      return;
> >  }
> > +
> > +void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr) {
> > +    CPUState *cs;
> > +
> > +    for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) {
> > +        RISCVCPU *riscv_cpu = RISCV_CPU(cs);
> > +        riscv_cpu->env.kernel_addr = kernel_addr;
> > +        riscv_cpu->env.fdt_addr = fdt_addr;
> > +    }
> > +}
> > diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index
> > 3af074148e..c8bcd9d9e5 100644
> > --- a/hw/riscv/virt.c
> > +++ b/hw/riscv/virt.c
> > @@ -38,6 +38,7 @@
> >  #include "chardev/char.h"
> >  #include "sysemu/device_tree.h"
> >  #include "sysemu/sysemu.h"
> > +#include "sysemu/kvm.h"
> >  #include "hw/pci/pci.h"
> >  #include "hw/pci-host/gpex.h"
> >  #include "hw/display/ramfb.h"
> > @@ -801,23 +802,25 @@ static void virt_machine_init(MachineState
> *machine)
> >                                  hart_count, &error_abort);
> >          sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_abort);
> >
> > -        /* Per-socket CLINT */
> > -        riscv_aclint_swi_create(
> > -            memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size,
> > -            base_hartid, hart_count, false);
> > -        riscv_aclint_mtimer_create(
> > -            memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size
> +
> > -                RISCV_ACLINT_SWI_SIZE,
> > -            RISCV_ACLINT_DEFAULT_MTIMER_SIZE, base_hartid,
> hart_count,
> > -            RISCV_ACLINT_DEFAULT_MTIMECMP,
> RISCV_ACLINT_DEFAULT_MTIME,
> > -            RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true);
> > -
> > -        /* Per-socket ACLINT SSWI */
> > -        if (s->have_aclint) {
> > +        if (!kvm_enabled()) {
> > +            /* Per-socket CLINT */
> >              riscv_aclint_swi_create(
> > -                memmap[VIRT_ACLINT_SSWI].base +
> > -                    i * memmap[VIRT_ACLINT_SSWI].size,
> > -                base_hartid, hart_count, true);
> > +                memmap[VIRT_CLINT].base + i *
> memmap[VIRT_CLINT].size,
> > +                base_hartid, hart_count, false);
> > +            riscv_aclint_mtimer_create(
> > +                memmap[VIRT_CLINT].base + i *
> memmap[VIRT_CLINT].size +
> > +                    RISCV_ACLINT_SWI_SIZE,
> > +                RISCV_ACLINT_DEFAULT_MTIMER_SIZE, base_hartid,
> hart_count,
> > +                RISCV_ACLINT_DEFAULT_MTIMECMP,
> RISCV_ACLINT_DEFAULT_MTIME,
> > +                RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true);
> > +
> > +            /* Per-socket ACLINT SSWI */
> > +            if (s->have_aclint) {
> > +                riscv_aclint_swi_create(
> > +                    memmap[VIRT_ACLINT_SSWI].base +
> > +                        i * memmap[VIRT_ACLINT_SSWI].size,
> > +                    base_hartid, hart_count, true);
> > +            }
> 
> Along with this, we should not generate FDT nodes of ACLINT (or SiFive CLINT)
> when KVM is enabled.
> 

OK, and I will remove M-mode PLIC contexts when kvm is enabled in next series.

Yifei

> >          }
> >
> >          /* Per-socket PLIC hart topology configuration string */ @@
> > -884,6 +887,16 @@ static void virt_machine_init(MachineState *machine)
> >      memory_region_add_subregion(system_memory,
> memmap[VIRT_MROM].base,
> >                                  mask_rom);
> >
> > +    /*
> > +     * Only direct boot kernel is currently supported for KVM VM,
> > +     * so the "-bios" parameter is ignored and treated like "-bios none"
> > +     * when KVM is enabled.
> > +     */
> > +    if (kvm_enabled()) {
> > +        g_free(machine->firmware);
> > +        machine->firmware = g_strdup("none");
> > +    }
> > +
> >      if (riscv_is_32bit(&s->soc[0])) {
> >          firmware_end_addr = riscv_find_and_load_firmware(machine,
> >                                      RISCV32_BIOS_BIN,
> start_addr,
> > NULL); @@ -941,6 +954,15 @@ static void virt_machine_init(MachineState
> *machine)
> >                                virt_memmap[VIRT_MROM].size,
> kernel_entry,
> >                                fdt_load_addr, machine->fdt);
> >
> > +    /*
> > +     * Only direct boot kernel is currently supported for KVM VM,
> > +     * So here setup kernel start address and fdt address.
> > +     * TODO:Support firmware loading and integrate to TCG start
> > +     */
> > +    if (kvm_enabled()) {
> > +        riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);
> > +    }
> > +
> >      /* SiFive Test MMIO device */
> >      sifive_test_create(memmap[VIRT_TEST].base);
> >
> > diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h index
> > baff11dd8a..5834c234aa 100644
> > --- a/include/hw/riscv/boot.h
> > +++ b/include/hw/riscv/boot.h
> > @@ -58,5 +58,6 @@ void riscv_rom_copy_firmware_info(MachineState
> *machine, hwaddr rom_base,
> >                                    hwaddr rom_size,
> >                                    uint32_t reset_vec_size,
> >                                    uint64_t kernel_entry);
> > +void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr);
> >
> >  #endif /* RISCV_BOOT_H */
> > diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index
> > f812998123..1c944872a3 100644
> > --- a/target/riscv/cpu.c
> > +++ b/target/riscv/cpu.c
> > @@ -29,6 +29,8 @@
> >  #include "hw/qdev-properties.h"
> >  #include "migration/vmstate.h"
> >  #include "fpu/softfloat-helpers.h"
> > +#include "sysemu/kvm.h"
> > +#include "kvm_riscv.h"
> >
> >  /* RISC-V CPU definitions */
> >
> > @@ -380,6 +382,12 @@ static void riscv_cpu_reset(DeviceState *dev)
> >      cs->exception_index = RISCV_EXCP_NONE;
> >      env->load_res = -1;
> >      set_default_nan_mode(1, &env->fp_status);
> > +
> > +#ifndef CONFIG_USER_ONLY
> > +    if (kvm_enabled()) {
> > +        kvm_riscv_reset_vcpu(cpu);
> > +    }
> > +#endif
> >  }
> >
> >  static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info
> > *info) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index
> > 0760c0af93..2807eb1bcb 100644
> > --- a/target/riscv/cpu.h
> > +++ b/target/riscv/cpu.h
> > @@ -255,6 +255,9 @@ struct CPURISCVState {
> >
> >      /* Fields from here on are preserved across CPU reset. */
> >      QEMUTimer *timer; /* Internal timer */
> > +
> > +    hwaddr kernel_addr;
> > +    hwaddr fdt_addr;
> >  };
> >
> >  OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass, diff --git
> > a/target/riscv/kvm-stub.c b/target/riscv/kvm-stub.c new file mode
> > 100644 index 0000000000..39b96fe3f4
> > --- /dev/null
> > +++ b/target/riscv/kvm-stub.c
> > @@ -0,0 +1,25 @@
> > +/*
> > + * QEMU KVM RISC-V specific function stubs
> > + *
> > + * Copyright (c) 2020 Huawei Technologies Co., Ltd
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2 or later, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > +WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY
> > +or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
> > +License for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > +along with
> > + * this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +#include "qemu/osdep.h"
> > +#include "cpu.h"
> > +#include "kvm_riscv.h"
> > +
> > +void kvm_riscv_reset_vcpu(RISCVCPU *cpu) {
> > +    abort();
> > +}
> > diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c index
> > e695b91dc7..db6d8a5b6e 100644
> > --- a/target/riscv/kvm.c
> > +++ b/target/riscv/kvm.c
> > @@ -37,6 +37,7 @@
> >  #include "hw/irq.h"
> >  #include "qemu/log.h"
> >  #include "hw/loader.h"
> > +#include "kvm_riscv.h"
> >
> >  static uint64_t kvm_riscv_reg_id(CPURISCVState *env, uint64_t type,
> > uint64_t idx)  { @@ -369,6 +370,19 @@ int
> > kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
> >      return 0;
> >  }
> >
> > +void kvm_riscv_reset_vcpu(RISCVCPU *cpu) {
> > +    CPURISCVState *env = &cpu->env;
> > +
> > +    if (!kvm_enabled()) {
> > +        return;
> > +    }
> > +    env->pc = cpu->env.kernel_addr;
> > +    env->gpr[10] = kvm_arch_vcpu_id(CPU(cpu)); /* a0 */
> > +    env->gpr[11] = cpu->env.fdt_addr;          /* a1 */
> > +    env->satp = 0;
> > +}
> > +
> >  bool kvm_arch_cpu_check_are_resettable(void)
> >  {
> >      return true;
> > diff --git a/target/riscv/kvm_riscv.h b/target/riscv/kvm_riscv.h new
> > file mode 100644 index 0000000000..f38c82bf59
> > --- /dev/null
> > +++ b/target/riscv/kvm_riscv.h
> > @@ -0,0 +1,24 @@
> > +/*
> > + * QEMU KVM support -- RISC-V specific functions.
> > + *
> > + * Copyright (c) 2020 Huawei Technologies Co., Ltd
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2 or later, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > +WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY
> > +or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
> > +License for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > +along with
> > + * this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#ifndef QEMU_KVM_RISCV_H
> > +#define QEMU_KVM_RISCV_H
> > +
> > +void kvm_riscv_reset_vcpu(RISCVCPU *cpu);
> > +
> > +#endif
> > diff --git a/target/riscv/meson.build b/target/riscv/meson.build index
> > 2faf08a941..fe41cc5805 100644
> > --- a/target/riscv/meson.build
> > +++ b/target/riscv/meson.build
> > @@ -19,7 +19,7 @@ riscv_ss.add(files(
> >    'bitmanip_helper.c',
> >    'translate.c',
> >  ))
> > -riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'))
> > +riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'), if_false:
> > +files('kvm-stub.c'))
> >
> >  riscv_softmmu_ss = ss.source_set()
> >  riscv_softmmu_ss.add(files(
> > --
> > 2.19.1
> >
> 
> Regards,
> Anup




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux