Re: [RFC 1/6] RISC-V: Avoid using per cpu array for ordered booting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Dec 4, 2021 at 5:50 AM Atish Patra <atishp@xxxxxxxxxxxxxx> wrote:
>
> From: Atish Patra <atishp@xxxxxxxxxxxx>
>
> Currently both order booting and spinwait approach uses a per cpu
> array to update stack & task pointer. This approach will not work for the
> following cases.
> 1. If NR_CPUs are configured to be less than highest hart id.
> 2. A platform has sparse hartid.
>
> This issue can be fixed for ordered booting as the booting cpu brings up
> one cpu at a time using SBI HSM extension which has opaque parameter
> that is unused until now.
>
> Introduce a common secondary boot data structure that can store the stack
> and task pointer. Secondary harts will use this data while booting up
> to setup the sp & tp.
>
> Signed-off-by: Atish Patra <atishp@xxxxxxxxxxxx>
> ---
>  arch/riscv/include/asm/cpu_ops_sbi.h | 28 ++++++++++++++++++++++++++++
>  arch/riscv/kernel/cpu_ops_sbi.c      | 23 ++++++++++++++++++++---
>  arch/riscv/kernel/head.S             | 19 ++++++++++---------
>  3 files changed, 58 insertions(+), 12 deletions(-)
>  create mode 100644 arch/riscv/include/asm/cpu_ops_sbi.h
>
> diff --git a/arch/riscv/include/asm/cpu_ops_sbi.h b/arch/riscv/include/asm/cpu_ops_sbi.h
> new file mode 100644
> index 000000000000..ccb9a6d30486
> --- /dev/null
> +++ b/arch/riscv/include/asm/cpu_ops_sbi.h
> @@ -0,0 +1,28 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2021 by Rivos Inc.
> + */
> +#ifndef __ASM_CPU_OPS_SBI_H
> +#define __ASM_CPU_OPS_SBI_H
> +
> +#ifndef __ASSEMBLY__
> +#include <linux/init.h>
> +#include <linux/sched.h>
> +#include <linux/threads.h>
> +
> +/**
> + * struct sbi_hart_boot_data - Hart specific boot used during booting and
> + *                            cpu hotplug.
> + * @task_ptr: A pointer to the hart specific tp
> + * @stack_ptr: A pointer to the hart specific sp
> + */
> +struct sbi_hart_boot_data {
> +       void *task_ptr;
> +       void *stack_ptr;
> +};
> +#endif
> +
> +#define SBI_HART_BOOT_TASK_PTR_OFFSET (0x00)
> +#define SBI_HART_BOOT_STACK_PTR_OFFSET RISCV_SZPTR

Don't manually create these defines instead generate this
defines at compile time by adding entries in kernel/asm-offsets.c

> +
> +#endif /* ifndef __ASM_CPU_OPS_H */
> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
> index 685fae72b7f5..2e7a9dd9c2a7 100644
> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> @@ -7,13 +7,22 @@
>
>  #include <linux/init.h>
>  #include <linux/mm.h>
> +#include <linux/sched/task_stack.h>
>  #include <asm/cpu_ops.h>
> +#include <asm/cpu_ops_sbi.h>
>  #include <asm/sbi.h>
>  #include <asm/smp.h>
>
>  extern char secondary_start_sbi[];
>  const struct cpu_operations cpu_ops_sbi;
>
> +/*
> + * Ordered booting via HSM brings one cpu at a time. However, cpu hotplug can
> + * be invoked from multiple threads in paralle. Define a per cpu data
> + * to handle that.
> + */
> +DEFINE_PER_CPU(struct sbi_hart_boot_data, boot_data);
> +
>  static int sbi_hsm_hart_start(unsigned long hartid, unsigned long saddr,
>                               unsigned long priv)
>  {
> @@ -58,9 +67,17 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
>         int rc;
>         unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>         int hartid = cpuid_to_hartid_map(cpuid);
> -
> -       cpu_update_secondary_bootdata(cpuid, tidle);
> -       rc = sbi_hsm_hart_start(hartid, boot_addr, 0);
> +       unsigned long hsm_data;
> +       struct sbi_hart_boot_data *bdata = &per_cpu(boot_data, cpuid);
> +
> +       /* Make sure tidle is updated */
> +       smp_mb();
> +       bdata->task_ptr = tidle;
> +       bdata->stack_ptr = task_stack_page(tidle) + THREAD_SIZE;
> +       /* Make sure boot data is updated */
> +       smp_mb();
> +       hsm_data = __pa(bdata);
> +       rc = sbi_hsm_hart_start(hartid, boot_addr, hsm_data);
>
>         return rc;
>  }
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index f52f01ecbeea..40d4c625513c 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -11,6 +11,7 @@
>  #include <asm/page.h>
>  #include <asm/pgtable.h>
>  #include <asm/csr.h>
> +#include <asm/cpu_ops_sbi.h>
>  #include <asm/hwcap.h>
>  #include <asm/image.h>
>  #include "efi-header.S"
> @@ -167,15 +168,15 @@ secondary_start_sbi:
>         la a3, .Lsecondary_park
>         csrw CSR_TVEC, a3
>
> -       slli a3, a0, LGREG
> -       la a4, __cpu_up_stack_pointer
> -       XIP_FIXUP_OFFSET a4
> -       la a5, __cpu_up_task_pointer
> -       XIP_FIXUP_OFFSET a5
> -       add a4, a3, a4
> -       add a5, a3, a5
> -       REG_L sp, (a4)
> -       REG_L tp, (a5)
> +       /* a0 contains the hartid & a1 contains boot data */
> +       li a2, SBI_HART_BOOT_TASK_PTR_OFFSET
> +       XIP_FIXUP_OFFSET a2
> +       add a2, a2, a1
> +       REG_L tp, (a2)
> +       li a3, SBI_HART_BOOT_STACK_PTR_OFFSET
> +       XIP_FIXUP_OFFSET a3
> +       add a3, a3, a1
> +       REG_L sp, (a3)
>
>         .global secondary_start_common
>  secondary_start_common:
> --
> 2.33.1
>

Regards,
Anup



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux