On Wed, Dec 09, 2009 at 08:18:21PM +0100, Alexander Graf wrote:
> Daniel P. Berrange wrote:
> >
> > Unconditionally telling people to run rmmod is a pretty dangerous thing
> > todo. If they typod and gave the PCI addr of their disk controller instead
> > of the NIC, they'll be less than happy at the results of our recommended
> > command to "fix" the error. Likewise if they have multiple devices using
> > the same driver & just want to assign one of them. I think it is safer to
> > just have the first bit of your proposed error message
> >
> > "The device 04:00.0 is in use by the kernel driver 'igb'."
> >
> >
> > NB 'rmmod' is not the ideal approach for PCI assignment. It is better
> > to explicitly re-bind the device to 'pcistub' because that ensures that
> > no other driver will ever be able to reclaim the device.
> >
>
> Oh - mind to get into detail there? It'd be great if we could tell users
> an even better way to unbind their device from the driver than rmmod :)
The direct low level sysfs way involves the following steps
// Tell pci-stub to accept a particular vendor+product ID binding
# echo "8086 27cb" > /sys/bus/pci/drivers/pci-stub/new_id
// Remove device from existing PCI driver
# echo "00:1d.3" > /sys/bus/pci/drivers/e1000/unbind
// Add device to pci-stub PCI driver
# echo "00:1d.3" > /sys/bus/pci/drivers/pci-stub/bind
// Tell pci-stub to stop accepting a vendor+product ID binding
# echo "8086 27cb" > /sys/bus/pci/drivers/pci-stub/remove_id
The reason for that last step is that if you have multiple devices of
the same vendor+product, you don't want a later hotplug event to bind
the new device to pci-stub too !
At a higher level this is also possible with libvirt's nodedev-XXX commands
// Find the name of device you want to detach
# virsh nodedev-list --tree
computer
|
+- net_computer_loopback
+- pci_8086_2448
| |
| +- pci_104c_ac56
|
+- pci_8086_27a0
+- pci_8086_27a1
| |
...snip rest of info...
// Check it really is the device you want to detach
# virsh nodedev-dumpxml pci_8086_27a1
<device>
<name>pci_8086_27a1</name>
<parent>computer</parent>
<driver>
<name>pcieport-driver</name>
</driver>
<capability type='pci'>
<domain>0</domain>
<bus>0</bus>
<slot>1</slot>
<function>0</function>
<product id='0x27a1'>Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port</product>
<vendor id='0x8086'>Intel Corporation</vendor>
</capability>
</device>
// Detach it from your host OS
# virsh nodedev-dettach pci_8086_27a1
Device pci_8086_27a1 dettached
That nodedev-dettach command, does all 4 of the sysfs commands in one
go. Those nodedev-XXX commands are all usable, even if you're not using
libvirt for actually running guests. If you are using libvirt for running
the guests, then you don't even need those steps. Simply set the attribute
'managed=yes' for the <hostdev> in the guest config, and libvirt does the
device detach automatically & reattachs when shutting down the guest
Regards,
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
