While trying to get device passthrough working with an emulex hba, kvm
refused to pass it through because it has a BAR of 256 bytes:
Region 0: Memory at d2100000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at d2101000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at b100 [size=256]
Since the page boundary is an arbitrary optimization to allow 1:1 mapping of
physical to virtual addresses, we can still take the old MMIO callback route.
So let's add a second code path that allows for size & 0xFFF != 0 sized regions
by looping it through userspace.
I verified that it works by passing through an e1000 with this additional patch
applied and the card acted the same way it did without this patch:
map_func = assigned_dev_iomem_map;
- if (cur_region->size & 0xFFF) {
+ if (i != PCI_ROM_SLOT){
fprintf(stderr, "PCI region %d at address 0x%llx "
Signed-off-by: Alexander Graf <agraf@xxxxxxx>
---
hw/device-assignment.c | 129 +++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 123 insertions(+), 6 deletions(-)
diff --git a/hw/device-assignment.c b/hw/device-assignment.c
index 13a86bb..beb488c 100644
--- a/hw/device-assignment.c
+++ b/hw/device-assignment.c
@@ -148,6 +148,105 @@ static uint32_t assigned_dev_ioport_readl(void *opaque, uint32_t addr)
return value;
}
+static uint32_t slow_bar_readb(void *opaque, target_phys_addr_t addr)
+{
+ AssignedDevRegion *d = opaque;
+ uint8_t *in = (uint8_t*)(d->u.r_virtbase + addr);
+ uint32_t r = -1;
+
+ r = *in;
+ DEBUG("slow_bar_readl addr=0x" TARGET_FMT_plx " val=0x%08x\n", addr, r);
+
+ return r;
+}
+
+static uint32_t slow_bar_readw(void *opaque, target_phys_addr_t addr)
+{
+ AssignedDevRegion *d = opaque;
+ uint16_t *in = (uint16_t*)(d->u.r_virtbase + addr);
+ uint32_t r = -1;
+
+ r = *in;
+ DEBUG("slow_bar_readl addr=0x" TARGET_FMT_plx " val=0x%08x\n", addr, r);
+
+ return r;
+}
+
+static uint32_t slow_bar_readl(void *opaque, target_phys_addr_t addr)
+{
+ AssignedDevRegion *d = opaque;
+ uint32_t *in = (uint32_t*)(d->u.r_virtbase + addr);
+ uint32_t r = -1;
+
+ r = *in;
+ DEBUG("slow_bar_readl addr=0x" TARGET_FMT_plx " val=0x%08x\n", addr, r);
+
+ return r;
+}
+
+static void slow_bar_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+ AssignedDevRegion *d = opaque;
+ uint8_t *out = (uint8_t*)(d->u.r_virtbase + addr);
+
+ DEBUG("slow_bar_writeb addr=0x" TARGET_FMT_plx " val=0x%02x\n", addr, val);
+ *out = val;
+}
+
+static void slow_bar_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+ AssignedDevRegion *d = opaque;
+ uint16_t *out = (uint16_t*)(d->u.r_virtbase + addr);
+
+ DEBUG("slow_bar_writew addr=0x" TARGET_FMT_plx " val=0x%04x\n", addr, val);
+ *out = val;
+}
+
+static void slow_bar_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+ AssignedDevRegion *d = opaque;
+ uint32_t *out = (uint32_t*)(d->u.r_virtbase + addr);
+
+ DEBUG("slow_bar_writel addr=0x" TARGET_FMT_plx " val=0x%08x\n", addr, val);
+ *out = val;
+}
+
+static CPUWriteMemoryFunc * const slow_bar_write[] = {
+ &slow_bar_writeb,
+ &slow_bar_writew,
+ &slow_bar_writel
+};
+
+static CPUReadMemoryFunc * const slow_bar_read[] = {
+ &slow_bar_readb,
+ &slow_bar_readw,
+ &slow_bar_readl
+};
+
+static void assigned_dev_iomem_map_slow(PCIDevice *pci_dev, int region_num,
+ pcibus_t e_phys, pcibus_t e_size,
+ int type)
+{
+ AssignedDevice *r_dev = container_of(pci_dev, AssignedDevice, dev);
+ AssignedDevRegion *region = &r_dev->v_addrs[region_num];
+ PCIRegion *real_region = &r_dev->real_device.regions[region_num];
+ int m;
+
+ DEBUG("slow map\n");
+ m = cpu_register_io_memory(slow_bar_read, slow_bar_write, region);
+ cpu_register_physical_memory(e_phys, e_size, m);
+
+ /* MSI-X MMIO page */
+ if ((e_size > 0) &&
+ real_region->base_addr <= r_dev->msix_table_addr &&
+ real_region->base_addr + real_region->size >= r_dev->msix_table_addr) {
+ int offset = r_dev->msix_table_addr - real_region->base_addr;
+
+ cpu_register_physical_memory(e_phys + offset,
+ TARGET_PAGE_SIZE, r_dev->mmio_index);
+ }
+}
+
static void assigned_dev_iomem_map(PCIDevice *pci_dev, int region_num,
pcibus_t e_phys, pcibus_t e_size, int type)
{
@@ -381,15 +480,25 @@ static int assigned_dev_register_regions(PCIRegion *io_regions,
/* handle memory io regions */
if (cur_region->type & IORESOURCE_MEM) {
+ void (*map_func)(PCIDevice *, int, pcibus_t, pcibus_t, int);
+ int slow_map = 0;
int t = cur_region->type & IORESOURCE_PREFETCH
? PCI_BASE_ADDRESS_MEM_PREFETCH
: PCI_BASE_ADDRESS_SPACE_MEMORY;
+
+ map_func = assigned_dev_iomem_map;
if (cur_region->size & 0xFFF) {
- fprintf(stderr, "Unable to assign device: PCI region %d "
- "at address 0x%llx has size 0x%x, "
- " which is not a multiple of 4K\n",
+ fprintf(stderr, "PCI region %d at address 0x%llx "
+ "has size 0x%x, which is not a multiple of 4K. "
+ "Using slow map\n",
i, (unsigned long long)cur_region->base_addr,
cur_region->size);
+ map_func = assigned_dev_iomem_map_slow;
+ slow_map = 1;
+ }
+
+ if (slow_map && (i == PCI_ROM_SLOT)) {
+ fprintf(stderr, "ROM not aligned - can't continue\n");
return -1;
}
@@ -402,6 +511,12 @@ static int assigned_dev_register_regions(PCIRegion *io_regions,
PROT_WRITE | PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE,
0, (off_t) 0);
+ } else if (slow_map) {
+ pci_dev->v_addrs[i].u.r_virtbase =
+ mmap(NULL,
+ cur_region->size,
+ PROT_WRITE | PROT_READ, MAP_SHARED,
+ cur_region->resource_fd, (off_t) 0);
} else {
pci_dev->v_addrs[i].u.r_virtbase =
mmap(NULL,
@@ -429,12 +544,14 @@ static int assigned_dev_register_regions(PCIRegion *io_regions,
pci_dev->v_addrs[i].e_size = 0;
/* add offset */
- pci_dev->v_addrs[i].u.r_virtbase +=
- (cur_region->base_addr & 0xFFF);
+ if (!slow_map) {
+ pci_dev->v_addrs[i].u.r_virtbase +=
+ (cur_region->base_addr & 0xFFF);
+ }
pci_register_bar((PCIDevice *) pci_dev, i,
cur_region->size, t,
- assigned_dev_iomem_map);
+ map_func);
continue;
}
/* handle port io regions */
--
1.6.0.2
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
