Implement a simple library to perform vGIC-v3 setup
from a host point of view. This includes creating a
vGIC device, setting up distributor and redistributor
attributes, and mapping the guest physical addresses.
The definition of REDIST_REGION_ATTR_ADDR is taken from
aarch64/vgic_init test. Hence, replace the definition
by including vgic.h in the test file.
Signed-off-by: Raghavendra Rao Ananta <rananta@xxxxxxxxxx>
Reviewed-by: Ricardo Koller <ricarkol@xxxxxxxxxx>
Reviewed-by: Andrew Jones <drjones@xxxxxxxxxx>
---
tools/testing/selftests/kvm/Makefile | 2 +-
.../testing/selftests/kvm/aarch64/vgic_init.c | 3 +-
.../selftests/kvm/include/aarch64/vgic.h | 20 ++++++
.../testing/selftests/kvm/lib/aarch64/vgic.c | 70 +++++++++++++++++++
4 files changed, 92 insertions(+), 3 deletions(-)
create mode 100644 tools/testing/selftests/kvm/include/aarch64/vgic.h
create mode 100644 tools/testing/selftests/kvm/lib/aarch64/vgic.c
diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
index b8441dc33b78..cb5bdd4f0694 100644
--- a/tools/testing/selftests/kvm/Makefile
+++ b/tools/testing/selftests/kvm/Makefile
@@ -35,7 +35,7 @@ endif
LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/rbtree.c lib/sparsebit.c lib/test_util.c lib/guest_modes.c lib/perf_test_util.c
LIBKVM_x86_64 = lib/x86_64/apic.c lib/x86_64/processor.c lib/x86_64/vmx.c lib/x86_64/svm.c lib/x86_64/ucall.c lib/x86_64/handlers.S
-LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c lib/aarch64/gic.c lib/aarch64/gic_v3.c
+LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c lib/aarch64/gic.c lib/aarch64/gic_v3.c lib/aarch64/vgic.c
LIBKVM_s390x = lib/s390x/processor.c lib/s390x/ucall.c lib/s390x/diag318_test_handler.c
TEST_GEN_PROGS_x86_64 = x86_64/cr4_cpuid_sync_test
diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c
index 623f31a14326..157fc24f39c5 100644
--- a/tools/testing/selftests/kvm/aarch64/vgic_init.c
+++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c
@@ -13,11 +13,10 @@
#include "test_util.h"
#include "kvm_util.h"
#include "processor.h"
+#include "vgic.h"
#define NR_VCPUS 4
-#define REDIST_REGION_ATTR_ADDR(count, base, flags, index) (((uint64_t)(count) << 52) | \
- ((uint64_t)((base) >> 16) << 16) | ((uint64_t)(flags) << 12) | index)
#define REG_OFFSET(vcpu, offset) (((uint64_t)vcpu << 32) | offset)
#define GICR_TYPER 0x8
diff --git a/tools/testing/selftests/kvm/include/aarch64/vgic.h b/tools/testing/selftests/kvm/include/aarch64/vgic.h
new file mode 100644
index 000000000000..0ecfb253893c
--- /dev/null
+++ b/tools/testing/selftests/kvm/include/aarch64/vgic.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ARM Generic Interrupt Controller (GIC) host specific defines
+ */
+
+#ifndef SELFTEST_KVM_VGIC_H
+#define SELFTEST_KVM_VGIC_H
+
+#include <linux/kvm.h>
+
+#define REDIST_REGION_ATTR_ADDR(count, base, flags, index) \
+ (((uint64_t)(count) << 52) | \
+ ((uint64_t)((base) >> 16) << 16) | \
+ ((uint64_t)(flags) << 12) | \
+ index)
+
+int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus,
+ uint64_t gicd_base_gpa, uint64_t gicr_base_gpa);
+
+#endif /* SELFTEST_KVM_VGIC_H */
diff --git a/tools/testing/selftests/kvm/lib/aarch64/vgic.c b/tools/testing/selftests/kvm/lib/aarch64/vgic.c
new file mode 100644
index 000000000000..b9b271ff520d
--- /dev/null
+++ b/tools/testing/selftests/kvm/lib/aarch64/vgic.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Generic Interrupt Controller (GIC) v3 host support
+ */
+
+#include <linux/kvm.h>
+#include <linux/sizes.h>
+#include <asm/kvm.h>
+
+#include "kvm_util.h"
+#include "../kvm_util_internal.h"
+#include "vgic.h"
+
+/*
+ * vGIC-v3 default host setup
+ *
+ * Input args:
+ * vm - KVM VM
+ * nr_vcpus - Number of vCPUs supported by this VM
+ * gicd_base_gpa - Guest Physical Address of the Distributor region
+ * gicr_base_gpa - Guest Physical Address of the Redistributor region
+ *
+ * Output args: None
+ *
+ * Return: GIC file-descriptor or negative error code upon failure
+ *
+ * The function creates a vGIC-v3 device and maps the distributor and
+ * redistributor regions of the guest. Since it depends on the number of
+ * vCPUs for the VM, it must be called after all the vCPUs have been created.
+ */
+int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus,
+ uint64_t gicd_base_gpa, uint64_t gicr_base_gpa)
+{
+ int gic_fd;
+ uint64_t redist_attr;
+ struct list_head *iter;
+ unsigned int nr_gic_pages, nr_vcpus_created = 0;
+
+ TEST_ASSERT(nr_vcpus, "Number of vCPUs cannot be empty\n");
+
+ /*
+ * Make sure that the caller is infact calling this
+ * function after all the vCPUs are added.
+ */
+ list_for_each(iter, &vm->vcpus)
+ nr_vcpus_created++;
+ TEST_ASSERT(nr_vcpus == nr_vcpus_created,
+ "Number of vCPUs requested (%u) doesn't match with the ones created for the VM (%u)\n",
+ nr_vcpus, nr_vcpus_created);
+
+ /* Distributor setup */
+ gic_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false);
+ kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+ KVM_VGIC_V3_ADDR_TYPE_DIST, &gicd_base_gpa, true);
+ nr_gic_pages = vm_calc_num_guest_pages(vm->mode, KVM_VGIC_V3_DIST_SIZE);
+ virt_map(vm, gicd_base_gpa, gicd_base_gpa, nr_gic_pages);
+
+ /* Redistributor setup */
+ redist_attr = REDIST_REGION_ATTR_ADDR(nr_vcpus, gicr_base_gpa, 0, 0);
+ kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+ KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &redist_attr, true);
+ nr_gic_pages = vm_calc_num_guest_pages(vm->mode,
+ KVM_VGIC_V3_REDIST_SIZE * nr_vcpus);
+ virt_map(vm, gicr_base_gpa, gicr_base_gpa, nr_gic_pages);
+
+ kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+ KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true);
+
+ return gic_fd;
+}
--
2.33.0.882.g93a45727a2-goog
