Re: [PATCH v20 00/17] KVM RISC-V Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tested-by: Guo Ren <guoren@xxxxxxxxxx>

qemu: commit 8880cc4362fde4ecdac0b2092318893118206fcf (HEAD -> master,
qemu/master)
kvmtool: commit 31627784e671d86fcc6f4754888b03dc83d3ec4a (HEAD ->
riscv_v9, avpatel/riscv_v9)
linux: commit 3940bf8c7e029e86beb82817708bc9c2c8781379 (HEAD ->
riscv_kvm_v20, avpatel/riscv_kvm_v20)
opensbi: commit 754d51192b6bf6a4afd9d46c5f736a9f6dd1b404 (HEAD ->
master, origin/master, origin/HEAD)

Find a small issue:

[    4.743119] Freeing unused kernel image (initmem) memory: 2144K
[    4.778912] Run /virt/init as init process
Mounting...
[    5.276235] random: fast init done
/ # poweroff
/ #
  # KVM session ended normally.
Using ctrl + a, ctrl + a, x could exit, but poweroff has no effect.

On Mon, Sep 27, 2021 at 7:40 PM Anup Patel <anup.patel@xxxxxxx> wrote:
>
> This series adds initial KVM RISC-V support. Currently, we are able to boot
> Linux on RV64/RV32 Guest with multiple VCPUs.
>
> Key aspects of KVM RISC-V added by this series are:
> 1. No RISC-V specific KVM IOCTL
> 2. Loadable KVM RISC-V module supported
> 3. Minimal possible KVM world-switch which touches only GPRs and few CSRs
> 4. Both RV64 and RV32 host supported
> 5. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure
> 6. KVM ONE_REG interface for VCPU register access from user-space
> 7. PLIC emulation is done in user-space
> 8. Timer and IPI emuation is done in-kernel
> 9. Both Sv39x4 and Sv48x4 supported for RV64 host
> 10. MMU notifiers supported
> 11. Generic dirtylog supported
> 12. FP lazy save/restore supported
> 13. SBI v0.1 emulation for KVM Guest available
> 14. Forward unhandled SBI calls to KVM userspace
> 15. Hugepage support for Guest/VM
> 16. IOEVENTFD support for Vhost
>
> Here's a brief TODO list which we will work upon after this series:
> 1. KVM unit test support
> 2. KVM selftest support
> 3. SBI v0.3 emulation in-kernel
> 4. In-kernel PMU virtualization
> 5. In-kernel AIA irqchip support
> 6. Nested virtualizaiton
> 7. ..... and more .....
>
> This series can be found in riscv_kvm_v20 branch at:
> https//github.com/avpatel/linux.git
>
> Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v9 branch
> at: https//github.com/avpatel/kvmtool.git
>
> The QEMU RISC-V hypervisor emulation is done by Alistair and is available
> in master branch at: https://git.qemu.org/git/qemu.git
>
> To play around with KVM RISC-V, refer KVM RISC-V wiki at:
> https://github.com/kvm-riscv/howto/wiki
> https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-QEMU
> https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-Spike
>
> Changes since v19:
>  - Rebased on Linux-5.15-rc3
>  - Converted kvm_err() to kvm_debug() in kvm_set_spte_gfn() function
>    added by PATCH11
>
> Changes since v18:
>  - Rebased on Linux-5.14-rc3
>  - Moved to new KVM debugfs interface
>  - Dropped PATCH17 of v18 series for having KVM RISC-V in drivers/staging
>
> Changes since v17:
>  - Rebased on Linux-5.13-rc2
>  - Moved to new KVM MMU notifier APIs
>  - Removed redundant kvm_arch_vcpu_uninit()
>  - Moved KVM RISC-V sources to drivers/staging for compliance with
>    Linux RISC-V patch acceptance policy
>
> Changes since v16:
>  - Rebased on Linux-5.12-rc5
>  - Remove redundant kvm_arch_create_memslot(), kvm_arch_vcpu_setup(),
>    kvm_arch_vcpu_init(), kvm_arch_has_vcpu_debugfs(), and
>    kvm_arch_create_vcpu_debugfs() from PATCH5
>  - Make stage2_wp_memory_region() and stage2_ioremap() as static
>    in PATCH13
>
> Changes since v15:
>  - Rebased on Linux-5.11-rc3
>  - Fixed kvm_stage2_map() to use gfn_to_pfn_prot() for determing
>    writeability of a host pfn.
>  - Use "__u64" in-place of "u64" and "__u32" in-place of "u32" for
>    uapi/asm/kvm.h
>
> Changes since v14:
>  - Rebased on Linux-5.10-rc3
>  - Fixed Stage2 (G-stage) PDG allocation to ensure it is 16KB aligned
>
> Changes since v13:
>  - Rebased on Linux-5.9-rc3
>  - Fixed kvm_riscv_vcpu_set_reg_csr() for SIP updation in PATCH5
>  - Fixed instruction length computation in PATCH7
>  - Added ioeventfd support in PATCH7
>  - Ensure HSTATUS.SPVP is set to correct value before using HLV/HSV
>    intructions in PATCH7
>  - Fixed stage2_map_page() to set PTE 'A' and 'D' bits correctly
>    in PATCH10
>  - Added stage2 dirty page logging in PATCH10
>  - Allow KVM user-space to SET/GET SCOUNTER CSR in PATCH5
>  - Save/restore SCOUNTEREN in PATCH6
>  - Reduced quite a few instructions for __kvm_riscv_switch_to() by
>    using CSR swap instruction in PATCH6
>  - Detect and use Sv48x4 when available in PATCH10
>
> Changes since v12:
>  - Rebased patches on Linux-5.8-rc4
>  - By default enable all counters in HCOUNTEREN
>  - RISC-V H-Extension v0.6.1 spec support
>
> Changes since v11:
>  - Rebased patches on Linux-5.7-rc3
>  - Fixed typo in typecast of stage2_map_size define
>  - Introduced struct kvm_cpu_trap to represent trap details and
>    use it as function parameter wherever applicable
>  - Pass memslot to kvm_riscv_stage2_map() for supporing dirty page
>    logging in future
>  - RISC-V H-Extension v0.6 spec support
>  - Send-out first three patches as separate series so that it can
>    be taken by Palmer for Linux RISC-V
>
> Changes since v10:
>  - Rebased patches on Linux-5.6-rc5
>  - Reduce RISCV_ISA_EXT_MAX from 256 to 64
>  - Separate PATCH for removing N-extension related defines
>  - Added comments as requested by Palmer
>  - Fixed HIDELEG CSR programming
>
> Changes since v9:
>  - Rebased patches on Linux-5.5-rc3
>  - Squash PATCH19 and PATCH20 into PATCH5
>  - Squash PATCH18 into PATCH11
>  - Squash PATCH17 into PATCH16
>  - Added ONE_REG interface for VCPU timer in PATCH13
>  - Use HTIMEDELTA for VCPU timer in PATCH13
>  - Updated KVM RISC-V mailing list in MAINTAINERS entry
>  - Update KVM kconfig option to depend on RISCV_SBI and MMU
>  - Check for SBI v0.2 and SBI v0.2 RFENCE extension at boot-time
>  - Use SBI v0.2 RFENCE extension in VMID implementation
>  - Use SBI v0.2 RFENCE extension in Stage2 MMU implementation
>  - Use SBI v0.2 RFENCE extension in SBI implementation
>  - Moved to RISC-V Hypervisor v0.5 draft spec
>  - Updated Documentation/virt/kvm/api.txt for timer ONE_REG interface
>
> Changes since v8:
>  - Rebased series on Linux-5.4-rc3 and Atish's SBI v0.2 patches
>  - Use HRTIMER_MODE_REL instead of HRTIMER_MODE_ABS in timer emulation
>  - Fixed kvm_riscv_stage2_map() to handle hugepages
>  - Added patch to forward unhandled SBI calls to user-space
>  - Added patch for iterative/recursive stage2 page table programming
>  - Added patch to remove per-CPU vsip_shadow variable
>  - Added patch to fix race-condition in kvm_riscv_vcpu_sync_interrupts()
>
> Changes since v7:
>  - Rebased series on Linux-5.4-rc1 and Atish's SBI v0.2 patches
>  - Removed PATCH1, PATCH3, and PATCH20 because these already merged
>  - Use kernel doc style comments for ISA bitmap functions
>  - Don't parse X, Y, and Z extension in riscv_fill_hwcap() because it will
>    be added in-future
>  - Mark KVM RISC-V kconfig option as EXPERIMENTAL
>  - Typo fix in commit description of PATCH6 of v7 series
>  - Use separate structs for CORE and CSR registers of ONE_REG interface
>  - Explicitly include asm/sbi.h in kvm/vcpu_sbi.c
>  - Removed implicit switch-case fall-through in kvm_riscv_vcpu_exit()
>  - No need to set VSSTATUS.MXR bit in kvm_riscv_vcpu_unpriv_read()
>  - Removed register for instruction length in kvm_riscv_vcpu_unpriv_read()
>  - Added defines for checking/decoding instruction length
>  - Added separate patch to forward unhandled SBI calls to userspace tool
>
> Changes since v6:
>  - Rebased patches on Linux-5.3-rc7
>  - Added "return_handled" in struct kvm_mmio_decode to ensure that
>    kvm_riscv_vcpu_mmio_return() updates SEPC only once
>  - Removed trap_stval parameter from kvm_riscv_vcpu_unpriv_read()
>  - Updated git repo URL in MAINTAINERS entry
>
> Changes since v5:
>  - Renamed KVM_REG_RISCV_CONFIG_TIMEBASE register to
>    KVM_REG_RISCV_CONFIG_TBFREQ register in ONE_REG interface
>  - Update SPEC in kvm_riscv_vcpu_mmio_return() for MMIO exits
>  - Use switch case instead of illegal instruction opcode table for simplicity
>  - Improve comments in stage2_remote_tlb_flush() for a potential remote TLB
>   flush optimization
>  - Handle all unsupported SBI calls in default case of
>    kvm_riscv_vcpu_sbi_ecall() function
>  - Fixed kvm_riscv_vcpu_sync_interrupts() for software interrupts
>  - Improved unprivilege reads to handle traps due to Guest stage1 page table
>  - Added separate patch to document RISC-V specific things in
>    Documentation/virt/kvm/api.txt
>
> Changes since v4:
>  - Rebased patches on Linux-5.3-rc5
>  - Added Paolo's Acked-by and Reviewed-by
>  - Updated mailing list in MAINTAINERS entry
>
> Changes since v3:
>  - Moved patch for ISA bitmap from KVM prep series to this series
>  - Make vsip_shadow as run-time percpu variable instead of compile-time
>  - Flush Guest TLBs on all Host CPUs whenever we run-out of VMIDs
>
> Changes since v2:
>  - Removed references of KVM_REQ_IRQ_PENDING from all patches
>  - Use kvm->srcu within in-kernel KVM run loop
>  - Added percpu vsip_shadow to track last value programmed in VSIP CSR
>  - Added comments about irqs_pending and irqs_pending_mask
>  - Used kvm_arch_vcpu_runnable() in-place-of kvm_riscv_vcpu_has_interrupt()
>    in system_opcode_insn()
>  - Removed unwanted smp_wmb() in kvm_riscv_stage2_vmid_update()
>  - Use kvm_flush_remote_tlbs() in kvm_riscv_stage2_vmid_update()
>  - Use READ_ONCE() in kvm_riscv_stage2_update_hgatp() for vmid
>
> Changes since v1:
>  - Fixed compile errors in building KVM RISC-V as module
>  - Removed unused kvm_riscv_halt_guest() and kvm_riscv_resume_guest()
>  - Set KVM_CAP_SYNC_MMU capability only after MMU notifiers are implemented
>  - Made vmid_version as unsigned long instead of atomic
>  - Renamed KVM_REQ_UPDATE_PGTBL to KVM_REQ_UPDATE_HGATP
>  - Renamed kvm_riscv_stage2_update_pgtbl() to kvm_riscv_stage2_update_hgatp()
>  - Configure HIDELEG and HEDELEG in kvm_arch_hardware_enable()
>  - Updated ONE_REG interface for CSR access to user-space
>  - Removed irqs_pending_lock and use atomic bitops instead
>  - Added separate patch for FP ONE_REG interface
>  - Added separate patch for updating MAINTAINERS file
>
> Anup Patel (13):
>   RISC-V: Add hypervisor extension related CSR defines
>   RISC-V: Add initial skeletal KVM support
>   RISC-V: KVM: Implement VCPU create, init and destroy functions
>   RISC-V: KVM: Implement VCPU interrupts and requests handling
>   RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls
>   RISC-V: KVM: Implement VCPU world-switch
>   RISC-V: KVM: Handle MMIO exits for VCPU
>   RISC-V: KVM: Handle WFI exits for VCPU
>   RISC-V: KVM: Implement VMID allocator
>   RISC-V: KVM: Implement stage2 page table programming
>   RISC-V: KVM: Implement MMU notifiers
>   RISC-V: KVM: Document RISC-V specific parts of KVM API
>   RISC-V: KVM: Add MAINTAINERS entry
>
> Atish Patra (4):
>   RISC-V: KVM: Add timer functionality
>   RISC-V: KVM: FP lazy save/restore
>   RISC-V: KVM: Implement ONE REG interface for FP registers
>   RISC-V: KVM: Add SBI v0.1 support
>
>  Documentation/virt/kvm/api.rst          | 193 ++++-
>  MAINTAINERS                             |  12 +
>  arch/riscv/Kconfig                      |   1 +
>  arch/riscv/Makefile                     |   1 +
>  arch/riscv/include/asm/csr.h            |  87 +++
>  arch/riscv/include/asm/kvm_host.h       | 266 +++++++
>  arch/riscv/include/asm/kvm_types.h      |   7 +
>  arch/riscv/include/asm/kvm_vcpu_timer.h |  44 ++
>  arch/riscv/include/uapi/asm/kvm.h       | 128 +++
>  arch/riscv/kernel/asm-offsets.c         | 156 ++++
>  arch/riscv/kvm/Kconfig                  |  36 +
>  arch/riscv/kvm/Makefile                 |  25 +
>  arch/riscv/kvm/main.c                   | 118 +++
>  arch/riscv/kvm/mmu.c                    | 802 +++++++++++++++++++
>  arch/riscv/kvm/tlb.S                    |  74 ++
>  arch/riscv/kvm/vcpu.c                   | 997 ++++++++++++++++++++++++
>  arch/riscv/kvm/vcpu_exit.c              | 701 +++++++++++++++++
>  arch/riscv/kvm/vcpu_sbi.c               | 185 +++++
>  arch/riscv/kvm/vcpu_switch.S            | 400 ++++++++++
>  arch/riscv/kvm/vcpu_timer.c             | 225 ++++++
>  arch/riscv/kvm/vm.c                     |  97 +++
>  arch/riscv/kvm/vmid.c                   | 120 +++
>  drivers/clocksource/timer-riscv.c       |   9 +
>  include/clocksource/timer-riscv.h       |  16 +
>  include/uapi/linux/kvm.h                |   8 +
>  25 files changed, 4699 insertions(+), 9 deletions(-)
>  create mode 100644 arch/riscv/include/asm/kvm_host.h
>  create mode 100644 arch/riscv/include/asm/kvm_types.h
>  create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h
>  create mode 100644 arch/riscv/include/uapi/asm/kvm.h
>  create mode 100644 arch/riscv/kvm/Kconfig
>  create mode 100644 arch/riscv/kvm/Makefile
>  create mode 100644 arch/riscv/kvm/main.c
>  create mode 100644 arch/riscv/kvm/mmu.c
>  create mode 100644 arch/riscv/kvm/tlb.S
>  create mode 100644 arch/riscv/kvm/vcpu.c
>  create mode 100644 arch/riscv/kvm/vcpu_exit.c
>  create mode 100644 arch/riscv/kvm/vcpu_sbi.c
>  create mode 100644 arch/riscv/kvm/vcpu_switch.S
>  create mode 100644 arch/riscv/kvm/vcpu_timer.c
>  create mode 100644 arch/riscv/kvm/vm.c
>  create mode 100644 arch/riscv/kvm/vmid.c
>  create mode 100644 include/clocksource/timer-riscv.h
>
> --
> 2.25.1
>


-- 
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux