Bugs item #2896992, was opened at 2009-11-13 05:58 Message generated for change (Comment added) made by You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2896992&group_id=180599 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Sergey Cheperis () Assigned to: Nobody/Anonymous (nobody) Summary: Intel PCI NIC passthrough problem Initial Comment: Host: - CPU Core2Duo E6300, Intel q45 chipset, VT-d enabled - Ubuntu 9.10 x86_64, kernel 2.6.31.4 recompiled with CONFIG_DMAR=y and CONFIG_INTR_REMAP=y according to http://www.linux-kvm.org/page/How_to_assign_devices_with_VT-d_in_KVM - in-kernel kvm module - qemu-kvm commit c04b2aebf50c7d8cba883b86d1b872ccfc8f2249 - intel_iommu=igfx_off - Qemu command line: /usr/local/bin/qemu-system-x86_64 -m 512 -k en-us -drive if=ide,file=/dev/server2/ubuntu,boot=on -cdrom /home/install/Linux/i386/ubuntu-9.10-desktop-i386.iso -boot d -vga std -pcidevice host=01:00.0 -net none -vnc :15 -daemonize Guest OSes: - Ubuntu 9.10 live CD i386, Windows Server 2003 i386, Windows Server 2008 x86_64, MacOS X 10.5.x i386 The device on the host: 01:00.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02) Subsystem: Intel Corporation Device 002e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: Memory at d0540000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at d0520000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d000 [size=64] Expansion ROM at bf000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 41e9 Kernel driver in use: pci-stub Kernel modules: e1000 Symptoms: The device is found and initialized in all OS'es. The driver properly detects the link speed, and does detect when I plug the cable in or out. However, it does not send or receive any packets, all the counters are always at 0's though there must be more at least due to DHCP activity. dmesg does not show any errors neither on the host or on the guest. ifconfig on the guest: eth0 Link encap:Ethernet HWaddr 00:07:e9:0f:c8:10 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -vvv on the guest: .... 00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02) Subsystem: Intel Corporation Device 002e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f0020000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at c040 [size=64] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Kernel driver in use: e1000 Kernel modules: e1000 cat /proc/interrupts on the guest: CPU0 0: 89 IO-APIC-edge timer 1: 1088 IO-APIC-edge i8042 4: 2 IO-APIC-edge 6: 2 IO-APIC-edge floppy 7: 4 IO-APIC-edge parport0 8: 0 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 11: 0 IO-APIC-fasteoi eth0 12: 1333 IO-APIC-edge i8042 14: 98 IO-APIC-edge ata_piix 15: 9874 IO-APIC-edge ata_piix NMI: 0 Non-maskable interrupts LOC: 59892 Local timer interrupts SPU: 0 Spurious interrupts CNT: 0 Performance counter interrupts PND: 0 Performance pending work RES: 0 Rescheduling interrupts CAL: 0 Function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts THR: 0 Threshold APIC interrupts MCE: 0 Machine check exceptions MCP: 7 Machine check polls ERR: 0 MIS: 0 ---------------------------------------------------------------------- >Comment By: Sergey Cheperis () Date: 2009-11-17 02:02 Message: qemu-kvm-0.11 stable - same result. Anybody managed to passthrough an Intel PCI/PCI-e NIC? ---------------------------------------------------------------------- Comment By: Sergey Cheperis () Date: 2009-11-13 21:05 Message: Note: with intel_iommu=on, same problem. ---------------------------------------------------------------------- Comment By: Sergey Cheperis () Date: 2009-11-13 05:59 Message: I should note that I also tried to pass through the built-in Intel Ethernet adapter of this board and got the same. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2896992&group_id=180599 -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
