Add some GICv2 tests: general KVM device tests and DIST/REDIST overlap
tests. Do this by making test_vcpus_then_vgic and test_vgic_then_vcpus
in vgic_init GIC version agnostic.
Signed-off-by: Ricardo Koller <ricarkol@xxxxxxxxxx>
---
.../testing/selftests/kvm/aarch64/vgic_init.c | 107 ++++++++++++------
1 file changed, 75 insertions(+), 32 deletions(-)
diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c
index b24067dbdac0..92f5c6ca6b8b 100644
--- a/tools/testing/selftests/kvm/aarch64/vgic_init.c
+++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c
@@ -79,74 +79,116 @@ static void vm_gic_destroy(struct vm_gic *v)
kvm_vm_free(v->vm);
}
+struct vgic_region_attr {
+ uint64_t attr;
+ uint64_t size;
+ uint64_t alignment;
+};
+
+struct vgic_region_attr gic_v3_dist_region = {
+ .attr = KVM_VGIC_V3_ADDR_TYPE_DIST,
+ .size = 0x10000,
+ .alignment = 0x10000,
+};
+
+struct vgic_region_attr gic_v3_redist_region = {
+ .attr = KVM_VGIC_V3_ADDR_TYPE_REDIST,
+ .size = NR_VCPUS * 0x20000,
+ .alignment = 0x10000,
+};
+
+struct vgic_region_attr gic_v2_dist_region = {
+ .attr = KVM_VGIC_V2_ADDR_TYPE_DIST,
+ .size = 0x1000,
+ .alignment = 0x1000,
+};
+
+struct vgic_region_attr gic_v2_cpu_region = {
+ .attr = KVM_VGIC_V2_ADDR_TYPE_CPU,
+ .size = 0x2000,
+ .alignment = 0x1000,
+};
+
/**
- * Helper routine that performs KVM device tests in general and
- * especially ARM_VGIC_V3 ones. Eventually the ARM_VGIC_V3
- * device gets created, a legacy RDIST region is set at @0x0
- * and a DIST region is set @0x60000
+ * Helper routine that performs KVM device tests in general. Eventually the
+ * ARM_VGIC (GICv2 or GICv3) device gets created with an overlapping
+ * DIST/REDIST. A RDIST region (legacy in the case of GICv3) is set at @0x0 and
+ * a DIST region is set @0x70000 for GICv3 and @0x1000 for GICv2.
*/
-static void subtest_v3_dist_rdist(struct vm_gic *v)
+static void subtest_dist_rdist(struct vm_gic *v)
{
int ret;
uint64_t addr;
+ struct vgic_region_attr rdist; /* CPU interface in GICv2*/
+ struct vgic_region_attr dist;
+
+ rdist = VGIC_DEV_IS_V3(v->gic_dev_type) ? gic_v3_redist_region
+ : gic_v2_cpu_region;
+ dist = VGIC_DEV_IS_V3(v->gic_dev_type) ? gic_v3_dist_region
+ : gic_v2_dist_region;
/* Check existing group/attributes */
kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_DIST);
+ dist.attr);
kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_REDIST);
+ rdist.attr);
/* check non existing attribute */
- ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, 0);
+ ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, -1);
TEST_ASSERT(ret && errno == ENXIO, "attribute not supported");
/* misaligned DIST and REDIST address settings */
- addr = 0x1000;
+ addr = dist.alignment / 0x10;
ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true);
- TEST_ASSERT(ret && errno == EINVAL, "GICv3 dist base not 64kB aligned");
+ dist.attr, &addr, true);
+ TEST_ASSERT(ret && errno == EINVAL, "GIC dist base not aligned");
+ addr = rdist.alignment / 0x10;
ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
- TEST_ASSERT(ret && errno == EINVAL, "GICv3 redist base not 64kB aligned");
+ rdist.attr, &addr, true);
+ TEST_ASSERT(ret && errno == EINVAL, "GIC redist/cpu base not aligned");
/* out of range address */
if (max_ipa_bits) {
addr = 1ULL << max_ipa_bits;
ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true);
+ dist.attr, &addr, true);
TEST_ASSERT(ret && errno == E2BIG, "dist address beyond IPA limit");
ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
+ rdist.attr, &addr, true);
TEST_ASSERT(ret && errno == E2BIG, "redist address beyond IPA limit");
}
/* set REDIST base address @0x0*/
addr = 0x00000;
kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
+ rdist.attr, &addr, true);
/* Attempt to create a second legacy redistributor region */
addr = 0xE0000;
ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
- TEST_ASSERT(ret && errno == EEXIST, "GICv3 redist base set again");
+ rdist.attr, &addr, true);
+ TEST_ASSERT(ret && errno == EEXIST, "GIC redist base set again");
- /* Attempt to mix legacy and new redistributor regions */
- addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 0, 0);
- ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
- KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
- TEST_ASSERT(ret && errno == EINVAL, "attempt to mix GICv3 REDIST and REDIST_REGION");
+ if (VGIC_DEV_IS_V3(v->gic_dev_type)) {
+ /* Attempt to mix legacy and new redistributor regions */
+ addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 0, 0);
+ ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+ KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION,
+ &addr, true);
+ TEST_ASSERT(ret && errno == EINVAL,
+ "attempt to mix GICv3 REDIST and REDIST_REGION");
+ }
/*
* Set overlapping DIST / REDIST, cannot be detected here. Will be detected
* on first vcpu run instead.
*/
- addr = 3 * 2 * 0x10000;
- kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_DIST,
- &addr, true);
+ addr = rdist.size - rdist.alignment;
+ kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+ dist.attr, &addr, true);
}
/* Test the new REDIST region API */
@@ -256,14 +298,14 @@ static void subtest_v3_redist_regions(struct vm_gic *v)
* VGIC KVM device is created and initialized before the secondary CPUs
* get created
*/
-static void test_v3_vgic_then_vcpus(uint32_t gic_dev_type)
+static void test_vgic_then_vcpus(uint32_t gic_dev_type)
{
struct vm_gic v;
int ret, i;
v = vm_gic_create_with_vcpus(gic_dev_type, 1);
- subtest_v3_dist_rdist(&v);
+ subtest_dist_rdist(&v);
/* Add the rest of the VCPUs */
for (i = 1; i < NR_VCPUS; ++i)
@@ -276,14 +318,14 @@ static void test_v3_vgic_then_vcpus(uint32_t gic_dev_type)
}
/* All the VCPUs are created before the VGIC KVM device gets initialized */
-static void test_v3_vcpus_then_vgic(uint32_t gic_dev_type)
+static void test_vcpus_then_vgic(uint32_t gic_dev_type)
{
struct vm_gic v;
int ret;
v = vm_gic_create_with_vcpus(gic_dev_type, NR_VCPUS);
- subtest_v3_dist_rdist(&v);
+ subtest_dist_rdist(&v);
ret = run_vcpu(v.vm, 3);
TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run");
@@ -552,9 +594,10 @@ int test_kvm_device(uint32_t gic_dev_type)
void run_tests(uint32_t gic_dev_type)
{
+ test_vcpus_then_vgic(gic_dev_type);
+ test_vgic_then_vcpus(gic_dev_type);
+
if (VGIC_DEV_IS_V3(gic_dev_type)) {
- test_v3_vcpus_then_vgic(gic_dev_type);
- test_v3_vgic_then_vcpus(gic_dev_type);
test_v3_new_redist_regions();
test_v3_typer_accesses();
test_v3_last_bit_redist_regions();
--
2.33.0.685.g46640cef36-goog
