Hello all,
I think all the patches in the series have 'Reviewed-by' now. Please
let me know if there's anything to do from my end for it move forward.
Regards,
Raghavendra
On Tue, Sep 14, 2021 at 3:31 PM Raghavendra Rao Ananta
<rananta@xxxxxxxxxx> wrote:
>
> Hello,
>
> The patch series adds a KVM selftest to validate the behavior of
> ARM's generic timer (patch-14). The test programs the timer IRQs
> periodically, and for each interrupt, it validates the behaviour
> against the architecture specifications. The test further provides
> a command-line interface to configure the number of vCPUs, the
> period of the timer, and the number of iterations that the test
> has to run for.
>
> Patch-15 adds an option to randomly migrate the vCPUs to different
> physical CPUs across the system. The bug for the fix provided by
> Marc with commit 3134cc8beb69d0d ("KVM: arm64: vgic: Resample HW
> pending state on deactivation") was discovered using arch_timer
> test with vCPU migrations.
>
> Since the test heavily depends on interrupts, patch-13 adds a host
> library to setup ARM Generic Interrupt Controller v3 (GICv3). This
> includes creating a vGIC device, setting up distributor and
> redistributor attributes, and mapping the guest physical addresses.
> Symmetrical to this, patch-12 adds a guest library to talk to the vGIC,
> which includes initializing the controller, enabling/disabling the
> interrupts, and so on.
>
> The following patches are utility patches that the above ones make use
> of:
> Patch-1 adds readl/writel support for guests to access MMIO space.
>
> Patch-2 imports arch/arm64/include/asm/sysreg.h into
> tools/arch/arm64/include/asm/ to make use of the register encodings
> and read/write definitions.
>
> Patch-3 is not directly related to the test, but makes
> aarch64/debug-exceptions.c use the read/write definitions from the
> imported sysreg.h and remove the existing definitions of read_sysreg()
> and write_sysreg().
>
> Patch-4 introduces ARM64_SYS_KVM_REG, that helps convert the SYS_*
> register encodings in sysreg.h to be acceptable by get_reg() and set_reg().
> It further replaces the users of ARM64_SYS_REG to use the new macro.
>
> Patch-5 adds the support for cpu_relax().
>
> Patch-6 adds basic arch_timer framework.
>
> Patch-7 adds udelay() support for the guests to utilize.
>
> Patch-8 adds local_irq_enable() and local_irq_disable() for the guests
> to enable/disable interrupts.
>
> Patch-9 is also unrelated to the test. It modifies the prototype of
> aarch64_vcpu_setup() to accept vcpuid as uint32_t, to keep it consistent
> with the other parts of code.
>
> Patch-10 adds the support to get the vcpuid for the guests. This allows
> them to access any cpu-centric private data in the upcoming patches.
>
> Patch-11 adds a light-weight support for spinlocks for the guests to
> use.
>
> The patch series, specifically the library support, is derived from the
> kvm-unit-tests and the kernel itself.
>
> Regards,
> Raghavendra
>
> v6 -> v7:
>
> Addressed comments by Andrew:
>
> - Changed the prototype of aarch64_vcpu_setup() to accept vcpuid as
> uint32_t.
> - Modified the prototype of guest_get_vcpuid() to return uint32_t.
> - Renamed assert messages in lib/aarch64/vgic.c to use "Number".
>
> v5 -> v6:
>
> - Corrected the syntax for write_sysreg_s in gic_v3.c (11/14) so that
> the file can be compiled with the unmodified
> arch/arm64/include/asm/sysreg.h that's imported into tools/.
>
> v4 -> v5:
>
> Addressed the comments by Andrew, Oliver, and Reiji (Thanks, again):
> - Squashed patches 17/18 and 18/18 into 3/18 and 14/18, respectively.
> - Dropped patches to keep track kvm_utils of nr_vcpus (12/18) and
> vm_get_mode() (13/18) as they were no longer needed.
> - Instead of creating the a map, exporting the vcpuid to the guest
> is done by using the TPIDR_EL1 register.
> - Just to be on the safer side, gic.c's gic_dist_init() explicitly
> checks if gic_ops is NULL.
> - Move sysreg.h from within selftests to tool/arch/arm64/include/asm/.
> - Rename ARM64_SYS_KVM_REG to KVM_ARM64_SYS_REG to improve readability.
> - Use the GIC regions' sizes from asm/kvm.h instead of re-defining it
> in the vgic host support.
> - Get the timer IRQ numbers via timer's device attributes
> (KVM_ARM_VCPU_TIMER_IRQ_PTIMER, KVM_ARM_VCPU_TIMER_IRQ_VTIMER) instead
> of depending on default numbers to be safe.
> - Add check to see if the vCPU migrations are in fact enabled, before
> looking for at least two online physical CPUs for the test.
> - Add missing blank lines in the arch_timer test.
>
> v3 -> v4:
>
> Addressed the comments by Andrew, Oliver, and Ricardo (Thank you):
> - Reimplemented get_vcpuid() by exporting a map of vcpuid:mpidr to the
> guest.
> - Import sysreg.h from arch/arm64/include/asm/sysreg.h to get the system
> register encodings and its read/write support. As a result, delete the
> existing definitions in processor.h.
> - Introduce ARM64_SYS_KVM_REG that converts SYS_* register definitions
> from sysreg.h into the encodings accepted by get_reg() and set_reg().
> - Hence, remove the existing encodings of system registers (CPACR_EL1,
> TCR_EL1, and friends) and replace all the its consumers throughout
> the selftests with ARM64_SYS_KVM_REG.
> - Keep track of number of vCPUs in 'struct kvm_vm'.
> - Add a helper method to get the KVM VM's mode.
> - Modify the vGIC host function vgic_v3_setup to make use of the above
> two helper methods, which prevents it from accepting nr_vcpus as
> an argument.
> - Move the definition of REDIST_REGION_ATTR_ADDR from lib/aarch64/vgic.c
> to include/aarch64/vgic.h.
> - Make the selftest, vgic_init.c, use the definition of REDIST_REGION_ATTR_ADDR
> from include/aarch64/vgic.h.
> - Turn ON vCPU migration by default (-m 2).
> - Add pr_debug() to log vCPU migrations. Helpful for diagnosis.
> - Change TEST_ASSERT(false,...) to TEST_FAIL() in the base arch_timer
> test.
> - Include linux/types.h for __force definitions.
> - Change the type of 'val' to 'int' in spin_lock() to match the lock
> value type.
> - Fix typos in code files and comments.
>
> v2 -> v3:
>
> - Addressed the comments from Ricardo regarding moving the vGIC host
> support for selftests to its own library.
> - Added an option (-m) to migrate the guest vCPUs to physical CPUs
> in the system.
>
> v1 -> v2:
>
> Addressed comments from Zenghui in include/aarch64/arch_timer.h:
> - Correct the header description
> - Remove unnecessary inclusion of linux/sizes.h
> - Re-arrange CTL_ defines in ascending order
> - Remove inappropriate 'return' from timer_set_* functions, which
> returns 'void'.
>
> v1: https://lore.kernel.org/kvmarm/20210813211211.2983293-1-rananta@xxxxxxxxxx/
> v2: https://lore.kernel.org/kvmarm/20210818184311.517295-1-rananta@xxxxxxxxxx/
> v3: https://lore.kernel.org/kvmarm/20210901211412.4171835-1-rananta@xxxxxxxxxx/
> v4: https://lore.kernel.org/kvmarm/20210909013818.1191270-1-rananta@xxxxxxxxxx/
> v5: https://lore.kernel.org/kvmarm/20210913204930.130715-1-rananta@xxxxxxxxxx/
> v6: https://lore.kernel.org/kvmarm/20210913230955.156323-1-rananta@xxxxxxxxxx/
>
> Raghavendra Rao Ananta (15):
> KVM: arm64: selftests: Add MMIO readl/writel support
> tools: arm64: Import sysreg.h
> KVM: arm64: selftests: Use read/write definitions from sysreg.h
> KVM: arm64: selftests: Introduce ARM64_SYS_KVM_REG
> KVM: arm64: selftests: Add support for cpu_relax
> KVM: arm64: selftests: Add basic support for arch_timers
> KVM: arm64: selftests: Add basic support to generate delays
> KVM: arm64: selftests: Add support to disable and enable local IRQs
> KVM: arm64: selftests: Maintain consistency for vcpuid type
> KVM: arm64: selftests: Add guest support to get the vcpuid
> KVM: arm64: selftests: Add light-weight spinlock support
> KVM: arm64: selftests: Add basic GICv3 support
> KVM: arm64: selftests: Add host support for vGIC
> KVM: arm64: selftests: Add arch_timer test
> KVM: arm64: selftests: arch_timer: Support vCPU migration
>
> tools/arch/arm64/include/asm/sysreg.h | 1296 +++++++++++++++++
> tools/testing/selftests/kvm/.gitignore | 1 +
> tools/testing/selftests/kvm/Makefile | 3 +-
> .../selftests/kvm/aarch64/arch_timer.c | 479 ++++++
> .../selftests/kvm/aarch64/debug-exceptions.c | 30 +-
> .../selftests/kvm/aarch64/psci_cpu_on_test.c | 2 +-
> .../testing/selftests/kvm/aarch64/vgic_init.c | 3 +-
> .../kvm/include/aarch64/arch_timer.h | 142 ++
> .../selftests/kvm/include/aarch64/delay.h | 25 +
> .../selftests/kvm/include/aarch64/gic.h | 21 +
> .../selftests/kvm/include/aarch64/processor.h | 90 +-
> .../selftests/kvm/include/aarch64/spinlock.h | 13 +
> .../selftests/kvm/include/aarch64/vgic.h | 20 +
> .../testing/selftests/kvm/include/kvm_util.h | 2 +
> tools/testing/selftests/kvm/lib/aarch64/gic.c | 95 ++
> .../selftests/kvm/lib/aarch64/gic_private.h | 21 +
> .../selftests/kvm/lib/aarch64/gic_v3.c | 240 +++
> .../selftests/kvm/lib/aarch64/gic_v3.h | 70 +
> .../selftests/kvm/lib/aarch64/processor.c | 24 +-
> .../selftests/kvm/lib/aarch64/spinlock.c | 27 +
> .../testing/selftests/kvm/lib/aarch64/vgic.c | 70 +
> 21 files changed, 2626 insertions(+), 48 deletions(-)
> create mode 100644 tools/arch/arm64/include/asm/sysreg.h
> create mode 100644 tools/testing/selftests/kvm/aarch64/arch_timer.c
> create mode 100644 tools/testing/selftests/kvm/include/aarch64/arch_timer.h
> create mode 100644 tools/testing/selftests/kvm/include/aarch64/delay.h
> create mode 100644 tools/testing/selftests/kvm/include/aarch64/gic.h
> create mode 100644 tools/testing/selftests/kvm/include/aarch64/spinlock.h
> create mode 100644 tools/testing/selftests/kvm/include/aarch64/vgic.h
> create mode 100644 tools/testing/selftests/kvm/lib/aarch64/gic.c
> create mode 100644 tools/testing/selftests/kvm/lib/aarch64/gic_private.h
> create mode 100644 tools/testing/selftests/kvm/lib/aarch64/gic_v3.c
> create mode 100644 tools/testing/selftests/kvm/lib/aarch64/gic_v3.h
> create mode 100644 tools/testing/selftests/kvm/lib/aarch64/spinlock.c
> create mode 100644 tools/testing/selftests/kvm/lib/aarch64/vgic.c
>
> --
> 2.33.0.309.g3052b89438-goog
>
