Today the maximum vcpu-id of a kvm guest's vcpu on x86 systems is set
via a #define in a header file.
In order to support higher vcpu-ids without generally increasing the
memory consumption of guests on the host (some guest structures contain
arrays sized by KVM_MAX_VCPU_ID) add a boot parameter for adding some
bits to the vcpu-id. Additional bits are needed as the vcpu-id is
constructed via bit-wise concatenation of socket-id, core-id, etc.
As those ids maximum values are not always a power of 2, the vcpu-ids
are sparse.
The additional number of bits needed is basically the number of
topology levels with a non-power-of-2 maximum value, excluding the top
most level.
The default value of the new parameter will be to take the correct
setting from the host's topology.
Calculating the maximum vcpu-id dynamically requires to allocate the
arrays using KVM_MAX_VCPU_ID as the size dynamically.
Signed-of-by: Juergen Gross <jgross@xxxxxxxx>
---
V2:
- switch to specifying additional bits (based on comment by Vitaly
Kuznetsov)
Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
---
.../admin-guide/kernel-parameters.txt | 18 ++++++++++++
arch/x86/include/asm/kvm_host.h | 4 ++-
arch/x86/kvm/ioapic.c | 12 +++++++-
arch/x86/kvm/ioapic.h | 4 +--
arch/x86/kvm/x86.c | 29 +++++++++++++++++++
5 files changed, 63 insertions(+), 4 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 84dc5790741b..37e194299311 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2435,6 +2435,24 @@
feature (tagged TLBs) on capable Intel chips.
Default is 1 (enabled)
+ kvm.vcpu_id_add_bits=
+ [KVM,X86] The vcpu-ids of guests are sparse, as they
+ are constructed by bit-wise concatenation of the ids of
+ the different topology levels (sockets, cores, threads).
+
+ This parameter specifies how many additional bits the
+ maximum vcpu-id needs compared to the maximum number of
+ vcpus.
+
+ Normally this value is the number of topology levels
+ without the threads level and without the highest
+ level.
+
+ The special value -1 can be used to support guests
+ with the same topology is the host.
+
+ Default: -1
+
l1d_flush= [X86,INTEL]
Control mitigation for L1D based snooping vulnerability.
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index af6ce8d4c86a..3513edee8e22 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -39,7 +39,7 @@
#define KVM_MAX_VCPUS 288
#define KVM_SOFT_MAX_VCPUS 240
-#define KVM_MAX_VCPU_ID 1023
+#define KVM_MAX_VCPU_ID kvm_max_vcpu_id()
/* memory slots that are not exposed to userspace */
#define KVM_PRIVATE_MEM_SLOTS 3
@@ -1588,6 +1588,8 @@ extern u64 kvm_max_tsc_scaling_ratio;
extern u64 kvm_default_tsc_scaling_ratio;
/* bus lock detection supported? */
extern bool kvm_has_bus_lock_exit;
+/* maximum vcpu-id */
+unsigned int kvm_max_vcpu_id(void);
extern u64 kvm_mce_cap_supported;
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index ff005fe738a4..52e8ea90c914 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -685,11 +685,21 @@ static const struct kvm_io_device_ops ioapic_mmio_ops = {
int kvm_ioapic_init(struct kvm *kvm)
{
struct kvm_ioapic *ioapic;
+ size_t sz;
int ret;
- ioapic = kzalloc(sizeof(struct kvm_ioapic), GFP_KERNEL_ACCOUNT);
+ sz = sizeof(struct kvm_ioapic) +
+ sizeof(*ioapic->rtc_status.dest_map.map) *
+ BITS_TO_LONGS(KVM_MAX_VCPU_ID + 1) +
+ sizeof(*ioapic->rtc_status.dest_map.vectors) *
+ (KVM_MAX_VCPU_ID + 1);
+ ioapic = kzalloc(sz, GFP_KERNEL_ACCOUNT);
if (!ioapic)
return -ENOMEM;
+ ioapic->rtc_status.dest_map.map = (void *)(ioapic + 1);
+ ioapic->rtc_status.dest_map.vectors =
+ (void *)(ioapic->rtc_status.dest_map.map +
+ BITS_TO_LONGS(KVM_MAX_VCPU_ID + 1));
spin_lock_init(&ioapic->lock);
INIT_DELAYED_WORK(&ioapic->eoi_inject, kvm_ioapic_eoi_inject_work);
kvm->arch.vioapic = ioapic;
diff --git a/arch/x86/kvm/ioapic.h b/arch/x86/kvm/ioapic.h
index bbd4a5d18b5d..623a3c5afad7 100644
--- a/arch/x86/kvm/ioapic.h
+++ b/arch/x86/kvm/ioapic.h
@@ -39,13 +39,13 @@ struct kvm_vcpu;
struct dest_map {
/* vcpu bitmap where IRQ has been sent */
- DECLARE_BITMAP(map, KVM_MAX_VCPU_ID + 1);
+ unsigned long *map;
/*
* Vector sent to a given vcpu, only valid when
* the vcpu's bit in map is set
*/
- u8 vectors[KVM_MAX_VCPU_ID + 1];
+ u8 *vectors;
};
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e5d5c5ed7dd4..6b6f38f0b617 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -78,6 +78,7 @@
#include <asm/intel_pt.h>
#include <asm/emulate_prefix.h>
#include <asm/sgx.h>
+#include <asm/topology.h>
#include <clocksource/hyperv_timer.h>
#define CREATE_TRACE_POINTS
@@ -184,6 +185,34 @@ module_param(force_emulation_prefix, bool, S_IRUGO);
int __read_mostly pi_inject_timer = -1;
module_param(pi_inject_timer, bint, S_IRUGO | S_IWUSR);
+static int __read_mostly vcpu_id_add_bits = -1;
+module_param(vcpu_id_add_bits, int, S_IRUGO);
+
+unsigned int kvm_max_vcpu_id(void)
+{
+ int n_bits = fls(KVM_MAX_VCPUS - 1);
+
+ if (vcpu_id_add_bits < -1 || vcpu_id_add_bits > (32 - n_bits)) {
+ pr_err("Invalid value of vcpu_id_add_bits=%d parameter!\n",
+ vcpu_id_add_bits);
+ vcpu_id_add_bits = -1;
+ }
+
+ if (vcpu_id_add_bits >= 0) {
+ n_bits += vcpu_id_add_bits;
+ } else {
+ n_bits++; /* One additional bit for core level. */
+ if (topology_max_die_per_package() > 1)
+ n_bits++; /* One additional bit for die level. */
+ }
+
+ if (!n_bits)
+ n_bits = 1;
+
+ return (1U << n_bits) - 1;
+}
+EXPORT_SYMBOL_GPL(kvm_max_vcpu_id);
+
/*
* Restoring the host value for MSRs that are only consumed when running in
* usermode, e.g. SYSCALL MSRs and TSC_AUX, can be deferred until the CPU
--
2.26.2
