Re: [PATCH RFC v6 08/12] target/riscv: Handle KVM_EXIT_RISCV_SBI exit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 17, 2021 at 1:25 PM Yifei Jiang <jiangyifei@xxxxxxxxxx> wrote:
>
> Use char-fe to handle console sbi call, which implement early
> console io while apply 'earlycon=sbi' into kernel parameters.
>
> Signed-off-by: Yifei Jiang <jiangyifei@xxxxxxxxxx>
> Signed-off-by: Mingwang Li <limingwang@xxxxxxxxxx>
> ---
>  target/riscv/kvm.c                 | 42 ++++++++++++++++-
>  target/riscv/sbi_ecall_interface.h | 72 ++++++++++++++++++++++++++++++
>  2 files changed, 113 insertions(+), 1 deletion(-)
>  create mode 100644 target/riscv/sbi_ecall_interface.h
>
> diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
> index bc9cb5d8f9..a68f31c2f3 100644
> --- a/target/riscv/kvm.c
> +++ b/target/riscv/kvm.c
> @@ -38,6 +38,8 @@
>  #include "qemu/log.h"
>  #include "hw/loader.h"
>  #include "kvm_riscv.h"
> +#include "sbi_ecall_interface.h"
> +#include "chardev/char-fe.h"
>
>  static uint64_t kvm_riscv_reg_id(CPURISCVState *env, uint64_t type, uint64_t idx)
>  {
> @@ -435,9 +437,47 @@ bool kvm_arch_stop_on_emulation_error(CPUState *cs)
>      return true;
>  }
>
> +static int kvm_riscv_handle_sbi(struct kvm_run *run)
> +{
> +    int ret = 0;
> +    unsigned char ch;
> +    switch (run->riscv_sbi.extension_id) {
> +    case SBI_EXT_0_1_CONSOLE_PUTCHAR:
> +        ch = run->riscv_sbi.args[0];
> +        qemu_chr_fe_write(serial_hd(0)->be, &ch, sizeof(ch));
> +        break;
> +    case SBI_EXT_0_1_CONSOLE_GETCHAR:
> +        ret = qemu_chr_fe_read_all(serial_hd(0)->be, &ch, sizeof(ch));
> +        if (ret == sizeof(ch)) {
> +            run->riscv_sbi.args[0] = ch;
> +        } else {
> +            run->riscv_sbi.args[0] = -1;
> +        }
> +        break;

These have been deprecated (see
https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc#4-legacy-extensions-eids-0x00---0x0f),
is it even worth supporting them?

> +    default:
> +        qemu_log_mask(LOG_UNIMP,
> +                      "%s: un-handled SBI EXIT, specific reasons is %lu\n",
> +                      __func__, run->riscv_sbi.extension_id);
> +        ret = -1;
> +        break;
> +    }
> +    return ret;
> +}
> +
>  int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
>  {
> -    return 0;
> +    int ret = 0;
> +    switch (run->exit_reason) {
> +    case KVM_EXIT_RISCV_SBI:
> +        ret = kvm_riscv_handle_sbi(run);
> +        break;
> +    default:
> +        qemu_log_mask(LOG_UNIMP, "%s: un-handled exit reason %d\n",
> +                      __func__, run->exit_reason);
> +        ret = -1;
> +        break;
> +    }
> +    return ret;
>  }
>
>  void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
> diff --git a/target/riscv/sbi_ecall_interface.h b/target/riscv/sbi_ecall_interface.h
> new file mode 100644
> index 0000000000..fb1a3fa8f2
> --- /dev/null
> +++ b/target/riscv/sbi_ecall_interface.h
> @@ -0,0 +1,72 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2019 Western Digital Corporation or its affiliates.
> + *
> + * Authors:
> + *   Anup Patel <anup.patel@xxxxxxx>
> + */
> +
> +#ifndef __SBI_ECALL_INTERFACE_H__
> +#define __SBI_ECALL_INTERFACE_H__
> +
> +/* clang-format off */
> +
> +/* SBI Extension IDs */
> +#define SBI_EXT_0_1_SET_TIMER           0x0
> +#define SBI_EXT_0_1_CONSOLE_PUTCHAR     0x1
> +#define SBI_EXT_0_1_CONSOLE_GETCHAR     0x2
> +#define SBI_EXT_0_1_CLEAR_IPI           0x3
> +#define SBI_EXT_0_1_SEND_IPI            0x4
> +#define SBI_EXT_0_1_REMOTE_FENCE_I      0x5
> +#define SBI_EXT_0_1_REMOTE_SFENCE_VMA   0x6
> +#define SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID 0x7
> +#define SBI_EXT_0_1_SHUTDOWN            0x8
> +#define SBI_EXT_BASE                    0x10
> +#define SBI_EXT_TIME                    0x54494D45
> +#define SBI_EXT_IPI                     0x735049
> +#define SBI_EXT_RFENCE                  0x52464E43
> +#define SBI_EXT_HSM                     0x48534D
> +
> +/* SBI function IDs for BASE extension*/
> +#define SBI_EXT_BASE_GET_SPEC_VERSION   0x0
> +#define SBI_EXT_BASE_GET_IMP_ID         0x1
> +#define SBI_EXT_BASE_GET_IMP_VERSION    0x2
> +#define SBI_EXT_BASE_PROBE_EXT          0x3
> +#define SBI_EXT_BASE_GET_MVENDORID      0x4
> +#define SBI_EXT_BASE_GET_MARCHID        0x5
> +#define SBI_EXT_BASE_GET_MIMPID         0x6
> +
> +/* SBI function IDs for TIME extension*/
> +#define SBI_EXT_TIME_SET_TIMER          0x0
> +
> +/* SBI function IDs for IPI extension*/
> +#define SBI_EXT_IPI_SEND_IPI            0x0
> +
> +/* SBI function IDs for RFENCE extension*/
> +#define SBI_EXT_RFENCE_REMOTE_FENCE_I       0x0
> +#define SBI_EXT_RFENCE_REMOTE_SFENCE_VMA    0x1
> +#define SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID  0x2
> +#define SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA   0x3
> +#define SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID 0x4
> +#define SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA   0x5
> +#define SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID 0x6
> +
> +/* SBI function IDs for HSM extension */
> +#define SBI_EXT_HSM_HART_START          0x0
> +#define SBI_EXT_HSM_HART_STOP           0x1
> +#define SBI_EXT_HSM_HART_GET_STATUS     0x2
> +
> +#define SBI_HSM_HART_STATUS_STARTED     0x0
> +#define SBI_HSM_HART_STATUS_STOPPED     0x1
> +#define SBI_HSM_HART_STATUS_START_PENDING   0x2
> +#define SBI_HSM_HART_STATUS_STOP_PENDING    0x3
> +
> +#define SBI_SPEC_VERSION_MAJOR_OFFSET   24
> +#define SBI_SPEC_VERSION_MAJOR_MASK     0x7f
> +#define SBI_SPEC_VERSION_MINOR_MASK     0xffffff
> +#define SBI_EXT_VENDOR_START            0x09000000
> +#define SBI_EXT_VENDOR_END              0x09FFFFFF
> +/* clang-format on */
> +
> +#endif
> --
> 2.19.1
>
>



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux