[PULL 11/11] numa: Parse initiator= attribute before cpus= attribute

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Michal Privoznik <mprivozn@xxxxxxxxxx>

When parsing cpus= attribute of -numa object couple of checks
is performed, such as correct initiator setting (see the if()
statement at the end of for() loop in
machine_set_cpu_numa_node()).

However, with the current code cpus= attribute is parsed before
initiator= attribute and thus the check may fail even though it
is not obvious why. But since parsing the initiator= attribute
does not depend on the cpus= attribute we can swap the order of
the two.

It's fairly easy to reproduce with the following command line
(snippet of an actual cmd line):

  -smp 4,sockets=4,cores=1,threads=1 \
  -object '{"qom-type":"memory-backend-ram","id":"ram-node0","size":2147483648}' \
  -numa node,nodeid=0,cpus=0-1,initiator=0,memdev=ram-node0 \
  -object '{"qom-type":"memory-backend-ram","id":"ram-node1","size":2147483648}' \
  -numa node,nodeid=1,cpus=2-3,initiator=1,memdev=ram-node1 \
  -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=5 \
  -numa hmat-lb,initiator=0,target=0,hierarchy=first-level,data-type=access-latency,latency=10 \
  -numa hmat-lb,initiator=1,target=1,hierarchy=memory,data-type=access-latency,latency=5 \
  -numa hmat-lb,initiator=1,target=1,hierarchy=first-level,data-type=access-latency,latency=10 \
  -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=204800K \
  -numa hmat-lb,initiator=0,target=0,hierarchy=first-level,data-type=access-bandwidth,bandwidth=208896K \
  -numa hmat-lb,initiator=1,target=1,hierarchy=memory,data-type=access-bandwidth,bandwidth=204800K \
  -numa hmat-lb,initiator=1,target=1,hierarchy=first-level,data-type=access-bandwidth,bandwidth=208896K \
  -numa hmat-cache,node-id=0,size=10K,level=1,associativity=direct,policy=write-back,line=8 \
  -numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8 \

Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx>
Reviewed-by: Igor Mammedov <imammedo@xxxxxxxxxx>
Message-Id: <b27a6a88986d63e3f610a728c845e01ff8d92e2e.1625662776.git.mprivozn@xxxxxxxxxx>
Signed-off-by: Eduardo Habkost <ehabkost@xxxxxxxxxx>
---
 hw/core/numa.c | 45 +++++++++++++++++++++++----------------------
 1 file changed, 23 insertions(+), 22 deletions(-)

diff --git a/hw/core/numa.c b/hw/core/numa.c
index 1058d3697b1..510d096a888 100644
--- a/hw/core/numa.c
+++ b/hw/core/numa.c
@@ -88,6 +88,29 @@ static void parse_numa_node(MachineState *ms, NumaNodeOptions *node,
         return;
     }
 
+    /*
+     * If not set the initiator, set it to MAX_NODES. And if
+     * HMAT is enabled and this node has no cpus, QEMU will raise error.
+     */
+    numa_info[nodenr].initiator = MAX_NODES;
+    if (node->has_initiator) {
+        if (!ms->numa_state->hmat_enabled) {
+            error_setg(errp, "ACPI Heterogeneous Memory Attribute Table "
+                       "(HMAT) is disabled, enable it with -machine hmat=on "
+                       "before using any of hmat specific options");
+            return;
+        }
+
+        if (node->initiator >= MAX_NODES) {
+            error_report("The initiator id %" PRIu16 " expects an integer "
+                         "between 0 and %d", node->initiator,
+                         MAX_NODES - 1);
+            return;
+        }
+
+        numa_info[nodenr].initiator = node->initiator;
+    }
+
     for (cpus = node->cpus; cpus; cpus = cpus->next) {
         CpuInstanceProperties props;
         if (cpus->value >= max_cpus) {
@@ -142,28 +165,6 @@ static void parse_numa_node(MachineState *ms, NumaNodeOptions *node,
         numa_info[nodenr].node_memdev = MEMORY_BACKEND(o);
     }
 
-    /*
-     * If not set the initiator, set it to MAX_NODES. And if
-     * HMAT is enabled and this node has no cpus, QEMU will raise error.
-     */
-    numa_info[nodenr].initiator = MAX_NODES;
-    if (node->has_initiator) {
-        if (!ms->numa_state->hmat_enabled) {
-            error_setg(errp, "ACPI Heterogeneous Memory Attribute Table "
-                       "(HMAT) is disabled, enable it with -machine hmat=on "
-                       "before using any of hmat specific options");
-            return;
-        }
-
-        if (node->initiator >= MAX_NODES) {
-            error_report("The initiator id %" PRIu16 " expects an integer "
-                         "between 0 and %d", node->initiator,
-                         MAX_NODES - 1);
-            return;
-        }
-
-        numa_info[nodenr].initiator = node->initiator;
-    }
     numa_info[nodenr].present = true;
     max_numa_nodeid = MAX(max_numa_nodeid, nodenr + 1);
     ms->numa_state->num_nodes++;
-- 
2.31.1




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux