On Mon, Jun 28, 2021 at 9:02 PM Stefan Hajnoczi <stefanha@xxxxxxxxxx> wrote:
>
> On Tue, Jun 15, 2021 at 10:13:31PM +0800, Xie Yongji wrote:
> > VDUSE (vDPA Device in Userspace) is a framework to support
> > implementing software-emulated vDPA devices in userspace. This
> > document is intended to clarify the VDUSE design and usage.
> >
> > Signed-off-by: Xie Yongji <xieyongji@xxxxxxxxxxxxx>
> > ---
> > Documentation/userspace-api/index.rst | 1 +
> > Documentation/userspace-api/vduse.rst | 222 ++++++++++++++++++++++++++++++++++
> > 2 files changed, 223 insertions(+)
> > create mode 100644 Documentation/userspace-api/vduse.rst
> >
> > diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
> > index 0b5eefed027e..c432be070f67 100644
> > --- a/Documentation/userspace-api/index.rst
> > +++ b/Documentation/userspace-api/index.rst
> > @@ -27,6 +27,7 @@ place where this information is gathered.
> > iommu
> > media/index
> > sysfs-platform_profile
> > + vduse
> >
> > .. only:: subproject and html
> >
> > diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst
> > new file mode 100644
> > index 000000000000..2f9cd1a4e530
> > --- /dev/null
> > +++ b/Documentation/userspace-api/vduse.rst
> > @@ -0,0 +1,222 @@
> > +==================================
> > +VDUSE - "vDPA Device in Userspace"
> > +==================================
> > +
> > +vDPA (virtio data path acceleration) device is a device that uses a
> > +datapath which complies with the virtio specifications with vendor
> > +specific control path. vDPA devices can be both physically located on
> > +the hardware or emulated by software. VDUSE is a framework that makes it
> > +possible to implement software-emulated vDPA devices in userspace. And
> > +to make it simple, the emulated vDPA device's control path is handled in
> > +the kernel and only the data path is implemented in the userspace.
> > +
> > +Note that only virtio block device is supported by VDUSE framework now,
> > +which can reduce security risks when the userspace process that implements
> > +the data path is run by an unprivileged user. The Support for other device
> > +types can be added after the security issue is clarified or fixed in the future.
> > +
> > +Start/Stop VDUSE devices
> > +------------------------
> > +
> > +VDUSE devices are started as follows:
> > +
> > +1. Create a new VDUSE instance with ioctl(VDUSE_CREATE_DEV) on
> > + /dev/vduse/control.
> > +
> > +2. Begin processing VDUSE messages from /dev/vduse/$NAME. The first
> > + messages will arrive while attaching the VDUSE instance to vDPA bus.
> > +
> > +3. Send the VDPA_CMD_DEV_NEW netlink message to attach the VDUSE
> > + instance to vDPA bus.
> > +
> > +VDUSE devices are stopped as follows:
> > +
> > +1. Send the VDPA_CMD_DEV_DEL netlink message to detach the VDUSE
> > + instance from vDPA bus.
> > +
> > +2. Close the file descriptor referring to /dev/vduse/$NAME
> > +
> > +3. Destroy the VDUSE instance with ioctl(VDUSE_DESTROY_DEV) on
> > + /dev/vduse/control
> > +
> > +The netlink messages metioned above can be sent via vdpa tool in iproute2
> > +or use the below sample codes:
> > +
> > +.. code-block:: c
> > +
> > + static int netlink_add_vduse(const char *name, enum vdpa_command cmd)
> > + {
> > + struct nl_sock *nlsock;
> > + struct nl_msg *msg;
> > + int famid;
> > +
> > + nlsock = nl_socket_alloc();
> > + if (!nlsock)
> > + return -ENOMEM;
> > +
> > + if (genl_connect(nlsock))
> > + goto free_sock;
> > +
> > + famid = genl_ctrl_resolve(nlsock, VDPA_GENL_NAME);
> > + if (famid < 0)
> > + goto close_sock;
> > +
> > + msg = nlmsg_alloc();
> > + if (!msg)
> > + goto close_sock;
> > +
> > + if (!genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, famid, 0, 0, cmd, 0))
> > + goto nla_put_failure;
> > +
> > + NLA_PUT_STRING(msg, VDPA_ATTR_DEV_NAME, name);
> > + if (cmd == VDPA_CMD_DEV_NEW)
> > + NLA_PUT_STRING(msg, VDPA_ATTR_MGMTDEV_DEV_NAME, "vduse");
> > +
> > + if (nl_send_sync(nlsock, msg))
> > + goto close_sock;
> > +
> > + nl_close(nlsock);
> > + nl_socket_free(nlsock);
> > +
> > + return 0;
> > + nla_put_failure:
> > + nlmsg_free(msg);
> > + close_sock:
> > + nl_close(nlsock);
> > + free_sock:
> > + nl_socket_free(nlsock);
> > + return -1;
> > + }
> > +
> > +How VDUSE works
> > +---------------
> > +
> > +Since the emuldated vDPA device's control path is handled in the kernel,
>
> s/emuldated/emulated/
>
Will fix it.
> > +a message-based communication protocol and few types of control messages
> > +are introduced by VDUSE framework to make userspace be aware of the data
> > +path related changes:
> > +
> > +- VDUSE_GET_VQ_STATE: Get the state for virtqueue from userspace
> > +
> > +- VDUSE_START_DATAPLANE: Notify userspace to start the dataplane
> > +
> > +- VDUSE_STOP_DATAPLANE: Notify userspace to stop the dataplane
> > +
> > +- VDUSE_UPDATE_IOTLB: Notify userspace to update the memory mapping in device IOTLB
> > +
> > +Userspace needs to read()/write() on /dev/vduse/$NAME to receive/reply
> > +those control messages from/to VDUSE kernel module as follows:
> > +
> > +.. code-block:: c
> > +
> > + static int vduse_message_handler(int dev_fd)
> > + {
> > + int len;
> > + struct vduse_dev_request req;
> > + struct vduse_dev_response resp;
> > +
> > + len = read(dev_fd, &req, sizeof(req));
> > + if (len != sizeof(req))
> > + return -1;
> > +
> > + resp.request_id = req.request_id;
> > +
> > + switch (req.type) {
> > +
> > + /* handle different types of message */
> > +
> > + }
> > +
> > + if (req.flags & VDUSE_REQ_FLAGS_NO_REPLY)
> > + return 0;
> > +
> > + len = write(dev_fd, &resp, sizeof(resp));
> > + if (len != sizeof(resp))
> > + return -1;
> > +
> > + return 0;
> > + }
> > +
> > +After VDUSE_START_DATAPLANE messages is received, userspace should start the
> > +dataplane processing with the help of some ioctls on /dev/vduse/$NAME:
> > +
> > +- VDUSE_IOTLB_GET_FD: get the file descriptor to the first overlapped iova region.
> > + Userspace can access this iova region by passing fd and corresponding size, offset,
> > + perm to mmap(). For example:
> > +
> > +.. code-block:: c
> > +
> > + static int perm_to_prot(uint8_t perm)
> > + {
> > + int prot = 0;
> > +
> > + switch (perm) {
> > + case VDUSE_ACCESS_WO:
> > + prot |= PROT_WRITE;
> > + break;
> > + case VDUSE_ACCESS_RO:
> > + prot |= PROT_READ;
> > + break;
> > + case VDUSE_ACCESS_RW:
> > + prot |= PROT_READ | PROT_WRITE;
> > + break;
> > + }
> > +
> > + return prot;
> > + }
> > +
> > + static void *iova_to_va(int dev_fd, uint64_t iova, uint64_t *len)
> > + {
> > + int fd;
> > + void *addr;
> > + size_t size;
> > + struct vduse_iotlb_entry entry;
> > +
> > + entry.start = iova;
> > + entry.last = iova + 1;
>
> Why +1?
>
> I expected the request to include *len so that VDUSE can create a bounce
> buffer for the full iova range, if necessary.
>
The function is used to translate iova to va. And the *len is not
specified by the caller. Instead, it's used to tell the caller the
length of the contiguous iova region from the specified iova. And the
ioctl VDUSE_IOTLB_GET_FD will get the file descriptor to the first
overlapped iova region. So using iova + 1 should be enough here.
> > + fd = ioctl(dev_fd, VDUSE_IOTLB_GET_FD, &entry);
> > + if (fd < 0)
> > + return NULL;
> > +
> > + size = entry.last - entry.start + 1;
> > + *len = entry.last - iova + 1;
> > + addr = mmap(0, size, perm_to_prot(entry.perm), MAP_SHARED,
> > + fd, entry.offset);
> > + close(fd);
> > + if (addr == MAP_FAILED)
> > + return NULL;
> > +
> > + /* do something to cache this iova region */
>
> How is userspace expected to manage iotlb mmaps? When should munmap(2)
> be called?
>
The simple way is using a list to store the iotlb mappings. And we
should call the munmap(2) for the old mappings when VDUSE_UPDATE_IOTLB
or VDUSE_STOP_DATAPLANE message is received.
> Should userspace expect VDUSE_IOTLB_GET_FD to return a full chunk of
> guest RAM (e.g. multiple gigabytes) that can be cached permanently or
> will it return just enough pages to cover [start, last)?
>
It should return one iotlb mapping that covers [start, last). In
vhost-vdpa cases, it might be a full chunk of guest RAM. In
virtio-vdpa cases, it might be the whole bounce buffer or one coherent
mapping (produced by dma_alloc_coherent()).
> > +
> > + return addr + iova - entry.start;
> > + }
> > +
> > +- VDUSE_DEV_GET_FEATURES: Get the negotiated features
>
> Are these VIRTIO feature bits? Please explain how feature negotiation
> works. There must be a way for userspace to report the device's
> supported feature bits to the kernel.
>
Yes, these are VIRTIO feature bits. Userspace will specify the
device's supported feature bits when creating a new VDUSE device with
ioctl(VDUSE_CREATE_DEV).
> > +- VDUSE_DEV_UPDATE_CONFIG: Update the configuration space and inject a config interrupt
>
> Does this mean the contents of the configuration space are cached by
> VDUSE?
Yes, but the kernel will also store the same contents.
> The downside is that the userspace code cannot generate the
> contents on demand. Most devices doin't need to generate the contents
> on demand, so I think this is okay but I had expected a different
> interface:
>
> kernel->userspace VDUSE_DEV_GET_CONFIG
> userspace->kernel VDUSE_DEV_INJECT_CONFIG_IRQ
>
The problem is how to handle the failure of VDUSE_DEV_GET_CONFIG. We
will need lots of modification of virtio codes to support that. So to
make it simple, we choose this way:
userspace -> kernel VDUSE_DEV_SET_CONFIG
userspace -> kernel VDUSE_DEV_INJECT_CONFIG_IRQ
> I think you can leave it the way it is, but I wanted to mention this in
> case someone thinks it's important to support generating the contents of
> the configuration space on demand.
>
Sorry, I didn't get you here. Can't VDUSE_DEV_SET_CONFIG and
VDUSE_DEV_INJECT_CONFIG_IRQ achieve that?
> > +- VDUSE_VQ_GET_INFO: Get the specified virtqueue's metadata
> > +
> > +- VDUSE_VQ_SETUP_KICKFD: set the kickfd for virtqueue, this eventfd is used
> > + by VDUSE kernel module to notify userspace to consume the vring.
> > +
> > +- VDUSE_INJECT_VQ_IRQ: inject an interrupt for specific virtqueue
>
> This information is useful but it's not enough to be able to implement a
> userspace device. Please provide more developer documentation or at
> least refer to uapi header files, published documents, etc that contain
> the details.
OK, I will try to add more details.
Thanks,
Yongji
