Hi Alex, On Fri, Jun 11, 2021 at 1:43 PM Alexandru Elisei <alexandru.elisei@xxxxxxx> wrote: > > Hi, > > On 6/8/21 3:11 PM, Fuad Tabba wrote: > > Hi, > > > > This patch series adds support for restricting CPU features for protected VMs > > in KVM [1]. > > > > Various feature configurations are allowed in KVM/arm64. Supporting all > > these features in pKVM is difficult, as it either involves moving much of > > the handling code to EL2, which adds bloat and results in a less verifiable > > trusted code base. Or it involves leaving the code handling at EL1, which > > risks having an untrusted host kernel feeding wrong information to the EL2 > > and to the protected guests. > > > > This series attempts to mitigate this by reducing the configuration space, > > providing a reduced amount of feature support at EL2 with the least amount of > > compromise of protected guests' capabilities. > > > > This is done by restricting CPU features exposed to protected guests through > > feature registers. These restrictions are enforced by trapping register > > accesses as well as instructions associated with these features, and injecting > > an undefined exception into the guest if it attempts to use a restricted > > feature. > > > > The features being restricted (only for protected VMs in protected mode) are > > the following: > > - Debug, Trace, and DoubleLock > > - Performance Monitoring (PMU) > > - Statistical Profiling (SPE) > > - Scalable Vector Extension (SVE) > > - Memory Partitioning and Monitoring (MPAM) > > - Activity Monitoring (AMU) > > - Memory Tagging (MTE) > > - Limited Ordering Regions (LOR) > > - AArch32 State > > - Generic Interrupt Controller (GIC) (depending on rVIC support) > > - Nested Virtualization (NV) > > - Reliability, Availability, and Serviceability (RAS) above V1 > > - Implementation-defined Features > > > > This series is based on kvmarm/next and Will's patches for an Initial pKVM user > > ABI [1]. You can find the applied series here [2]. > > Since this is implementing the kernel side of an RFC userspace ABI, I'm going to > treat the series as an RFC also and not go into the individual patches. > > What strikes me as odd is the fact that, as far as I can tell, you're duplicating > part of the kvm/sys_regs.c and kvm/handle_exit.c functionality in the nvhe code. > Why was this approach chosen instead of reusing the existing functions and adding > extra code to handle the protected VM case? > > Another example of this is detecting when a host dropped to 32bit EL0, the comment > says that you don't trust the host to make the check. What exactly do you trust > the host to do at what point? I don't see this explained anywhere, it's possible > I've missed it. You're right. I haven't explained this in the patch series or provided enough context other than a link to Will's presentation [1]. The idea is that protected VMs are protected from the host Linux kernel (and from other VMs), where the host does not have access to guest memory even if compromised. This patch series does not cover that part yet. It is a part of, and builds on, other concurrent work in order to get us there eventually [2]. Once everything falls into place, the host should not even have access to a protected guest's state or anything that would enable it to manipulate it (e.g., vcpu register context and el2 system registers), only hyp would have that access. If the host could access that state, then it might be able to get around the protection provided. Therefore, anything that is sensitive and that would require such access needs to happen at hyp, hence the code in nvhe running only at hyp. > I also think that registers that mostly don't change during the lifetime of the VM > (HCR_EL2, CPTR_EL2, MDCR_EL2) can be set by host when the VM becomes protected, > instead of fiddling with them at each world switch. Was there a particular reason > for changing them in __activate_traps_pvm() or was this just an implementation choice? You're right that they don't change during the lifetime of a VM, but protected VMs can coexist with non-protected VMs. The values of these registers are different between the two (different trapping to control protection as well as enabled features). Thus the new __activate_traps_pvm(), which would activate traps specifically for protected VMs. Thank you, /fuad [1] https://mirrors.edge.kernel.org/pub/linux/kernel/people/will/slides/kvmforum-2020-edited.pdf [2] Some of the work on protected KVM: https://lore.kernel.org/kvmarm/20201202184122.26046-1-dbrazdil@xxxxxxxxxx/ https://lore.kernel.org/kvmarm/20210602094347.3730846-1-qperret@xxxxxxxxxx/ https://lore.kernel.org/kvmarm/20210608114518.748712-1-qperret@xxxxxxxxxx/ https://lore.kernel.org/kvmarm/20210322175639.801566-1-maz@xxxxxxxxxx/ https://lore.kernel.org/kvmarm/20210603183347.1695-1-will@xxxxxxxxxx/ > Thanks, > > Alex > > > Cheers, > > /fuad > > > > [1] https://lore.kernel.org/kvmarm/20210603183347.1695-1-will@xxxxxxxxxx/ > > > > For more details about pKVM, please refer to Will's talk at KVM Forum 2020: > > https://www.youtube.com/watch?v=edqJSzsDRxk > > > > [2] https://android-kvm.googlesource.com/linux/+/refs/heads/tabba/el2_fixed_feature_v1
