Re: [PATCH Part1 RFC v3 21/22] x86/sev: Register SNP guest request platform device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 02, 2021 at 09:04:15AM -0500, Brijesh Singh wrote:
> Version 2 of GHCB specification provides NAEs that can be used by the SNP
> guest to communicate with the PSP without risk from a malicious hypervisor
> who wishes to read, alter, drop or replay the messages sent.
> 
> The hypervisor uses the SNP_GUEST_REQUEST command interface provided by
> the SEV-SNP firmware to forward the guest messages to the PSP.
> 
> In order to communicate with the PSP, the guest need to locate the secrets
> page inserted by the hypervisor during the SEV-SNP guest launch. The
> secrets page contains the communication keys used to send and receive the
> encrypted messages between the guest and the PSP.
> 
> The secrets page is located either through the setup_data cc_blob_address
> or EFI configuration table.
> 
> Create a platform device that the SNP guest driver can bind to get the
> platform resources. The SNP guest driver can provide userspace interface
> to get the attestation report, key derivation etc.
> 
> The helper snp_issue_guest_request() will be used by the drivers to
> send the guest message request to the hypervisor. The guest message header
> contains a message count. The message count is used in the IV. The
> firmware increments the message count by 1, and expects that next message
> will be using the incremented count.
> 
> The helper snp_msg_seqno() will be used by driver to get and message
> sequence counter, and it will be automatically incremented by the
> snp_issue_guest_request(). The incremented value is be saved in the
> secrets page so that the kexec'ed kernel knows from where to begin.
> 
> See SEV-SNP and GHCB spec for more details.
> 
> Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>
> ---
>  arch/x86/include/asm/sev.h      |  12 +++
>  arch/x86/include/uapi/asm/svm.h |   2 +
>  arch/x86/kernel/sev.c           | 176 ++++++++++++++++++++++++++++++++
>  arch/x86/platform/efi/efi.c     |   2 +
>  include/linux/efi.h             |   1 +
>  include/linux/sev-guest.h       |  76 ++++++++++++++
>  6 files changed, 269 insertions(+)
>  create mode 100644 include/linux/sev-guest.h
> 
> diff --git a/arch/x86/include/asm/sev.h b/arch/x86/include/asm/sev.h
> index 640108402ae9..da2f757cd9bc 100644
> --- a/arch/x86/include/asm/sev.h
> +++ b/arch/x86/include/asm/sev.h
> @@ -59,6 +59,18 @@ extern void vc_no_ghcb(void);
>  extern void vc_boot_ghcb(void);
>  extern bool handle_vc_boot_ghcb(struct pt_regs *regs);
>  
> +/* AMD SEV Confidential computing blob structure */
> +#define CC_BLOB_SEV_HDR_MAGIC	0x45444d41
> +struct cc_blob_sev_info {
> +	u32 magic;
> +	u16 version;
> +	u16 reserved;
> +	u64 secrets_phys;
> +	u32 secrets_len;
> +	u64 cpuid_phys;
> +	u32 cpuid_len;
> +};
> +
>  /* Software defined (when rFlags.CF = 1) */
>  #define PVALIDATE_FAIL_NOUPDATE		255
>  
> diff --git a/arch/x86/include/uapi/asm/svm.h b/arch/x86/include/uapi/asm/svm.h
> index c0152186a008..bd64f2b98ac7 100644
> --- a/arch/x86/include/uapi/asm/svm.h
> +++ b/arch/x86/include/uapi/asm/svm.h
> @@ -109,6 +109,7 @@
>  #define SVM_VMGEXIT_SET_AP_JUMP_TABLE		0
>  #define SVM_VMGEXIT_GET_AP_JUMP_TABLE		1
>  #define SVM_VMGEXIT_PSC				0x80000010
> +#define SVM_VMGEXIT_GUEST_REQUEST		0x80000011
>  #define SVM_VMGEXIT_AP_CREATION			0x80000013
>  #define SVM_VMGEXIT_AP_CREATE_ON_INIT		0
>  #define SVM_VMGEXIT_AP_CREATE			1
> @@ -222,6 +223,7 @@
>  	{ SVM_VMGEXIT_AP_JUMP_TABLE,	"vmgexit_ap_jump_table" }, \
>  	{ SVM_VMGEXIT_PSC,		"vmgexit_page_state_change" }, \
>  	{ SVM_VMGEXIT_AP_CREATION,	"vmgexit_ap_creation" }, \
> +	{ SVM_VMGEXIT_GUEST_REQUEST,	"vmgexit_guest_request" }, \
>  	{ SVM_EXIT_ERR,         "invalid_guest_state" }
>  
>  
> diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
> index 8f7ef35a25ef..8aae1166f52e 100644
> --- a/arch/x86/kernel/sev.c
> +++ b/arch/x86/kernel/sev.c
> @@ -9,6 +9,7 @@
>  
>  #define pr_fmt(fmt)	"SEV-ES: " fmt
>  
> +#include <linux/platform_device.h>
>  #include <linux/sched/debug.h>	/* For show_regs() */
>  #include <linux/percpu-defs.h>
>  #include <linux/mem_encrypt.h>
> @@ -16,10 +17,13 @@
>  #include <linux/printk.h>
>  #include <linux/mm_types.h>
>  #include <linux/set_memory.h>
> +#include <linux/sev-guest.h>
>  #include <linux/memblock.h>
>  #include <linux/kernel.h>
> +#include <linux/efi.h>
>  #include <linux/mm.h>
>  #include <linux/cpumask.h>
> +#include <linux/io.h>
>  
>  #include <asm/cpu_entry_area.h>
>  #include <asm/stacktrace.h>
> @@ -33,6 +37,7 @@
>  #include <asm/smp.h>
>  #include <asm/cpu.h>
>  #include <asm/apic.h>
> +#include <asm/setup.h>		/* For struct boot_params */
>  
>  #include "sev-internal.h"
>  
> @@ -47,6 +52,8 @@ static struct ghcb boot_ghcb_page __bss_decrypted __aligned(PAGE_SIZE);
>   */
>  static struct ghcb __initdata *boot_ghcb;
>  
> +static unsigned long snp_secrets_phys;
> +
>  /* #VC handler runtime per-CPU data */
>  struct sev_es_runtime_data {
>  	struct ghcb ghcb_page;
> @@ -105,6 +112,10 @@ struct ghcb_state {
>  	struct ghcb *ghcb;
>  };
>  
> +#ifdef CONFIG_EFI
> +extern unsigned long cc_blob_phys;
> +#endif
> +
>  static DEFINE_PER_CPU(struct sev_es_runtime_data*, runtime_data);
>  DEFINE_STATIC_KEY_FALSE(sev_es_enable_key);
>  
> @@ -1909,3 +1920,168 @@ bool __init handle_vc_boot_ghcb(struct pt_regs *regs)
>  	while (true)
>  		halt();
>  }
> +
> +static struct resource guest_req_res[0];
> +static struct platform_device guest_req_device = {
> +	.name		= "snp-guest",
> +	.id		= -1,
> +	.resource	= guest_req_res,
> +	.num_resources	= 1,
> +};

Perhaps I'm missing something, but I can't find where the memory for
"guest_req_res" is allocated. In my tests I had to turn this
zero-length array into a single struct to prevent the kernel from
crashing.

Thanks,
Sergio.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux