Some strange characters snuck into this file. Convert them to ASCII
for better readability.
Signed-off-by: Jim Mattson <jmattson@xxxxxxxxxx>
---
x86/vmx_tests.c | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/x86/vmx_tests.c b/x86/vmx_tests.c
index 2eb5962..179a55b 100644
--- a/x86/vmx_tests.c
+++ b/x86/vmx_tests.c
@@ -4049,13 +4049,13 @@ static void test_pi_desc_addr(u64 addr, bool ctrl)
}
/*
- * If the “process posted interrupts†VM-execution control is 1, the
+ * If the "process posted interrupts" VM-execution control is 1, the
* following must be true:
*
- * - The “virtual-interrupt delivery†VM-execution control is 1.
- * - The “acknowledge interrupt on exit†VM-exit control is 1.
+ * - The "virtual-interrupt delivery" VM-execution control is 1.
+ * - The "acknowledge interrupt on exit" VM-exit control is 1.
* - The posted-interrupt notification vector has a value in the
- * - range 0–255 (bits 15:8 are all 0).
+ * - range 0 - 255 (bits 15:8 are all 0).
* - Bits 5:0 of the posted-interrupt descriptor address are all 0.
* - The posted-interrupt descriptor address does not set any bits
* beyond the processor's physical-address width.
@@ -4179,7 +4179,7 @@ static void test_apic_ctls(void)
}
/*
- * If the “enable VPID†VM-execution control is 1, the value of the
+ * If the "enable VPID" VM-execution control is 1, the value of the
* of the VPID VM-execution control field must not be 0000H.
* [Intel SDM]
*/
@@ -4263,7 +4263,7 @@ static void test_invalid_event_injection(void)
vmcs_write(ENT_INTR_ERROR, 0x00000000);
vmcs_write(ENT_INST_LEN, 0x00000001);
- /* The field’s interruption type is not set to a reserved value. */
+ /* The field's interruption type is not set to a reserved value. */
ent_intr_info = ent_intr_info_base | INTR_TYPE_RESERVED | DE_VECTOR;
report_prefix_pushf("%s, VM-entry intr info=0x%x",
"RESERVED interruption type invalid [-]",
@@ -4480,7 +4480,7 @@ skip_unrestricted_guest:
/*
* If the interruption type is software interrupt, software exception,
* or privileged software exception, the VM-entry instruction-length
- * field is in the range 0–15.
+ * field is in the range 0 - 15.
*/
for (cnt = 0; cnt < 3; cnt++) {
@@ -4686,8 +4686,8 @@ out:
* VM-execution control must be 0.
* [Intel SDM]
*
- * If the “virtual NMIs” VM-execution control is 0, the “NMI-window
- * exiting” VM-execution control must be 0.
+ * If the "virtual NMIs" VM-execution control is 0, the "NMI-window
+ * exiting" VM-execution control must be 0.
* [Intel SDM]
*/
static void test_nmi_ctrls(void)
@@ -5448,14 +5448,14 @@ static void test_vm_execution_ctls(void)
* the VM-entry MSR-load count field is non-zero:
*
* - The lower 4 bits of the VM-entry MSR-load address must be 0.
- * The address should not set any bits beyond the processor’s
+ * The address should not set any bits beyond the processor's
* physical-address width.
*
* - The address of the last byte in the VM-entry MSR-load area
- * should not set any bits beyond the processor’s physical-address
+ * should not set any bits beyond the processor's physical-address
* width. The address of this last byte is VM-entry MSR-load address
* + (MSR count * 16) - 1. (The arithmetic used for the computation
- * uses more bits than the processor’s physical-address width.)
+ * uses more bits than the processor's physical-address width.)
*
*
* [Intel SDM]
@@ -5574,14 +5574,14 @@ static void test_vm_entry_ctls(void)
* the VM-exit MSR-store count field is non-zero:
*
* - The lower 4 bits of the VM-exit MSR-store address must be 0.
- * The address should not set any bits beyond the processor’s
+ * The address should not set any bits beyond the processor's
* physical-address width.
*
* - The address of the last byte in the VM-exit MSR-store area
- * should not set any bits beyond the processor’s physical-address
+ * should not set any bits beyond the processor's physical-address
* width. The address of this last byte is VM-exit MSR-store address
* + (MSR count * 16) - 1. (The arithmetic used for the computation
- * uses more bits than the processor’s physical-address width.)
+ * uses more bits than the processor's physical-address width.)
*
* If IA32_VMX_BASIC[48] is read as 1, neither address should set any bits
* in the range 63:32.
@@ -7172,7 +7172,7 @@ static void test_ctl_reg(const char *cr_name, u64 cr, u64 fixed0, u64 fixed1)
* operation.
* 3. On processors that support Intel 64 architecture, the CR3 field must
* be such that bits 63:52 and bits in the range 51:32 beyond the
- * processor’s physical-address width must be 0.
+ * processor's physical-address width must be 0.
*
* [Intel SDM]
*/
@@ -7940,11 +7940,11 @@ static void test_load_guest_pat(void)
#define MSR_IA32_BNDCFGS_RSVD_MASK 0x00000ffc
/*
- * If the “load IA32_BNDCFGS†VM-entry control is 1, the following
+ * If the "load IA32_BNDCFGS" VM-entry control is 1, the following
* checks are performed on the field for the IA32_BNDCFGS MSR:
*
- * — Bits reserved in the IA32_BNDCFGS MSR must be 0.
- * — The linear address in bits 63:12 must be canonical.
+ * - Bits reserved in the IA32_BNDCFGS MSR must be 0.
+ * - The linear address in bits 63:12 must be canonical.
*
* [Intel SDM]
*/
@@ -8000,9 +8000,9 @@ do { \
/*
* The following checks are done on the Selector field of the Guest Segment
* Registers:
- * — TR. The TI flag (bit 2) must be 0.
- * — LDTR. If LDTR is usable, the TI flag (bit 2) must be 0.
- * — SS. If the guest will not be virtual-8086 and the "unrestricted
+ * - TR. The TI flag (bit 2) must be 0.
+ * - LDTR. If LDTR is usable, the TI flag (bit 2) must be 0.
+ * - SS. If the guest will not be virtual-8086 and the "unrestricted
* guest" VM-execution control is 0, the RPL (bits 1:0) must equal
* the RPL of the selector field for CS.
*
--
2.31.1.607.g51e8a6a459-goog
