Re: [PATCH v2 1/3] virtio: update reset callback to return status

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 08, 2021 at 12:56:52PM +0300, Max Gurtovoy wrote:
> 
> On 4/8/2021 11:58 AM, Jason Wang wrote:
> > 
> > 在 2021/4/8 下午4:11, Max Gurtovoy 写道:
> > > The reset device operation, usually is an operation that might fail from
> > > various reasons. For example, the controller might be in a bad state and
> > > can't answer to any request. Usually, the paravirt SW based virtio
> > > devices always succeed in reset operation but this is not the case for
> > > HW based virtio devices.
> > 
> > 
> > I would like to know under what condition that the reset operation may
> > fail (except for the case of a bugg guest).
> 
> The controller might not be ready or stuck. This is a real use case for many
> PCI devices.
> 
> For real devices the FW might be in a bad state and it can happen also for
> paravirt device if you have a bug in the controller code or if you entered
> some error flow (Out of memory).
> 
> You don't want to be stuck because of one bad device.

OK so maybe we can do more to detect the bad device.
Won't we get all 1's on a read in this case?


> 
> > 
> > 
> > > 
> > > This commit is also a preparation for adding a timeout mechanism for
> > > resetting virtio devices.
> > > 
> > > Signed-off-by: Max Gurtovoy <mgurtovoy@xxxxxxxxxx>
> > > ---
> > > 
> > > changes from v1:
> > >   - update virtio_ccw.c (Cornelia)
> > >   - update virtio_uml.c
> > >   - update mlxbf-tmfifo.c
> > 
> > 
> > Note that virtio driver may call reset, so you probably need to convert
> > them.
> 
> I'm sure I understand.
> 
> Convert to what ?
> 
> Thanks.
> 
> > 
> > Thanks
> > 
> > 
> > > 
> > > ---
> > >   arch/um/drivers/virtio_uml.c             |  4 +++-
> > >   drivers/platform/mellanox/mlxbf-tmfifo.c |  4 +++-
> > >   drivers/remoteproc/remoteproc_virtio.c   |  4 +++-
> > >   drivers/s390/virtio/virtio_ccw.c         |  9 ++++++---
> > >   drivers/virtio/virtio.c                  | 22 +++++++++++++++-------
> > >   drivers/virtio/virtio_mmio.c             |  3 ++-
> > >   drivers/virtio/virtio_pci_legacy.c       |  4 +++-
> > >   drivers/virtio/virtio_pci_modern.c       |  3 ++-
> > >   drivers/virtio/virtio_vdpa.c             |  4 +++-
> > >   include/linux/virtio_config.h            |  5 +++--
> > >   10 files changed, 43 insertions(+), 19 deletions(-)
> > > 
> > > diff --git a/arch/um/drivers/virtio_uml.c b/arch/um/drivers/virtio_uml.c
> > > index 91ddf74ca888..b6e66265ed32 100644
> > > --- a/arch/um/drivers/virtio_uml.c
> > > +++ b/arch/um/drivers/virtio_uml.c
> > > @@ -827,11 +827,13 @@ static void vu_set_status(struct virtio_device
> > > *vdev, u8 status)
> > >       vu_dev->status = status;
> > >   }
> > >   -static void vu_reset(struct virtio_device *vdev)
> > > +static int vu_reset(struct virtio_device *vdev)
> > >   {
> > >       struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
> > >         vu_dev->status = 0;
> > > +
> > > +    return 0;
> > >   }
> > >     static void vu_del_vq(struct virtqueue *vq)
> > > diff --git a/drivers/platform/mellanox/mlxbf-tmfifo.c
> > > b/drivers/platform/mellanox/mlxbf-tmfifo.c
> > > index bbc4e71a16ff..c192b8ac5d9e 100644
> > > --- a/drivers/platform/mellanox/mlxbf-tmfifo.c
> > > +++ b/drivers/platform/mellanox/mlxbf-tmfifo.c
> > > @@ -980,11 +980,13 @@ static void
> > > mlxbf_tmfifo_virtio_set_status(struct virtio_device *vdev,
> > >   }
> > >     /* Reset the device. Not much here for now. */
> > > -static void mlxbf_tmfifo_virtio_reset(struct virtio_device *vdev)
> > > +static int mlxbf_tmfifo_virtio_reset(struct virtio_device *vdev)
> > >   {
> > >       struct mlxbf_tmfifo_vdev *tm_vdev = mlxbf_vdev_to_tmfifo(vdev);
> > >         tm_vdev->status = 0;
> > > +
> > > +    return 0;
> > >   }
> > >     /* Read the value of a configuration field. */
> > > diff --git a/drivers/remoteproc/remoteproc_virtio.c
> > > b/drivers/remoteproc/remoteproc_virtio.c
> > > index 0cc617f76068..ca9573c62c3d 100644
> > > --- a/drivers/remoteproc/remoteproc_virtio.c
> > > +++ b/drivers/remoteproc/remoteproc_virtio.c
> > > @@ -191,7 +191,7 @@ static void rproc_virtio_set_status(struct
> > > virtio_device *vdev, u8 status)
> > >       dev_dbg(&vdev->dev, "status: %d\n", status);
> > >   }
> > >   -static void rproc_virtio_reset(struct virtio_device *vdev)
> > > +static int rproc_virtio_reset(struct virtio_device *vdev)
> > >   {
> > >       struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
> > >       struct fw_rsc_vdev *rsc;
> > > @@ -200,6 +200,8 @@ static void rproc_virtio_reset(struct
> > > virtio_device *vdev)
> > >         rsc->status = 0;
> > >       dev_dbg(&vdev->dev, "reset !\n");
> > > +
> > > +    return 0;
> > >   }
> > >     /* provide the vdev features as retrieved from the firmware */
> > > diff --git a/drivers/s390/virtio/virtio_ccw.c
> > > b/drivers/s390/virtio/virtio_ccw.c
> > > index 54e686dca6de..52b32555e746 100644
> > > --- a/drivers/s390/virtio/virtio_ccw.c
> > > +++ b/drivers/s390/virtio/virtio_ccw.c
> > > @@ -732,14 +732,15 @@ static int virtio_ccw_find_vqs(struct
> > > virtio_device *vdev, unsigned nvqs,
> > >       return ret;
> > >   }
> > >   -static void virtio_ccw_reset(struct virtio_device *vdev)
> > > +static int virtio_ccw_reset(struct virtio_device *vdev)
> > >   {
> > >       struct virtio_ccw_device *vcdev = to_vc_device(vdev);
> > >       struct ccw1 *ccw;
> > > +    int ret;
> > >         ccw = ccw_device_dma_zalloc(vcdev->cdev, sizeof(*ccw));
> > >       if (!ccw)
> > > -        return;
> > > +        return -ENOMEM;
> > >         /* Zero status bits. */
> > >       vcdev->dma_area->status = 0;
> > > @@ -749,8 +750,10 @@ static void virtio_ccw_reset(struct
> > > virtio_device *vdev)
> > >       ccw->flags = 0;
> > >       ccw->count = 0;
> > >       ccw->cda = 0;
> > > -    ccw_io_helper(vcdev, ccw, VIRTIO_CCW_DOING_RESET);
> > > +    ret = ccw_io_helper(vcdev, ccw, VIRTIO_CCW_DOING_RESET);
> > >       ccw_device_dma_free(vcdev->cdev, ccw, sizeof(*ccw));
> > > +
> > > +    return ret;
> > >   }
> > >     static u64 virtio_ccw_get_features(struct virtio_device *vdev)
> > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > index 4b15c00c0a0a..ddbfd5b5f3bd 100644
> > > --- a/drivers/virtio/virtio.c
> > > +++ b/drivers/virtio/virtio.c
> > > @@ -338,7 +338,7 @@ int register_virtio_device(struct virtio_device
> > > *dev)
> > >       /* Assign a unique device index and hence name. */
> > >       err = ida_simple_get(&virtio_index_ida, 0, 0, GFP_KERNEL);
> > >       if (err < 0)
> > > -        goto out;
> > > +        goto out_err;
> > >         dev->index = err;
> > >       dev_set_name(&dev->dev, "virtio%u", dev->index);
> > > @@ -349,7 +349,9 @@ int register_virtio_device(struct virtio_device
> > > *dev)
> > >         /* We always start by resetting the device, in case a previous
> > >        * driver messed it up.  This also tests that code path a
> > > little. */
> > > -    dev->config->reset(dev);
> > > +    err = dev->config->reset(dev);
> > > +    if (err)
> > > +        goto out_ida;
> > >         /* Acknowledge that we've seen the device. */
> > >       virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
> > > @@ -362,10 +364,14 @@ int register_virtio_device(struct
> > > virtio_device *dev)
> > >        */
> > >       err = device_add(&dev->dev);
> > >       if (err)
> > > -        ida_simple_remove(&virtio_index_ida, dev->index);
> > > -out:
> > > -    if (err)
> > > -        virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED);
> > > +        goto out_ida;
> > > +
> > > +    return 0;
> > > +
> > > +out_ida:
> > > +    ida_simple_remove(&virtio_index_ida, dev->index);
> > > +out_err:
> > > +    virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED);
> > >       return err;
> > >   }
> > >   EXPORT_SYMBOL_GPL(register_virtio_device);
> > > @@ -408,7 +414,9 @@ int virtio_device_restore(struct virtio_device *dev)
> > >         /* We always start by resetting the device, in case a previous
> > >        * driver messed it up. */
> > > -    dev->config->reset(dev);
> > > +    ret = dev->config->reset(dev);
> > > +    if (ret)
> > > +        goto err;
> > >         /* Acknowledge that we've seen the device. */
> > >       virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
> > > diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
> > > index 56128b9c46eb..12b8f048c48d 100644
> > > --- a/drivers/virtio/virtio_mmio.c
> > > +++ b/drivers/virtio/virtio_mmio.c
> > > @@ -256,12 +256,13 @@ static void vm_set_status(struct virtio_device
> > > *vdev, u8 status)
> > >       writel(status, vm_dev->base + VIRTIO_MMIO_STATUS);
> > >   }
> > >   -static void vm_reset(struct virtio_device *vdev)
> > > +static int vm_reset(struct virtio_device *vdev)
> > >   {
> > >       struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
> > >         /* 0 status means a reset. */
> > >       writel(0, vm_dev->base + VIRTIO_MMIO_STATUS);
> > > +    return 0;
> > >   }
> > >     diff --git a/drivers/virtio/virtio_pci_legacy.c
> > > b/drivers/virtio/virtio_pci_legacy.c
> > > index d62e9835aeec..0b5d95e3efa1 100644
> > > --- a/drivers/virtio/virtio_pci_legacy.c
> > > +++ b/drivers/virtio/virtio_pci_legacy.c
> > > @@ -89,7 +89,7 @@ static void vp_set_status(struct virtio_device
> > > *vdev, u8 status)
> > >       iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
> > >   }
> > >   -static void vp_reset(struct virtio_device *vdev)
> > > +static int vp_reset(struct virtio_device *vdev)
> > >   {
> > >       struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > >       /* 0 status means a reset. */
> > > @@ -99,6 +99,8 @@ static void vp_reset(struct virtio_device *vdev)
> > >       ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
> > >       /* Flush pending VQ/configuration callbacks. */
> > >       vp_synchronize_vectors(vdev);
> > > +
> > > +    return 0;
> > >   }
> > >     static u16 vp_config_vector(struct virtio_pci_device *vp_dev,
> > > u16 vector)
> > > diff --git a/drivers/virtio/virtio_pci_modern.c
> > > b/drivers/virtio/virtio_pci_modern.c
> > > index fbd4ebc00eb6..cc3412a96a17 100644
> > > --- a/drivers/virtio/virtio_pci_modern.c
> > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > @@ -158,7 +158,7 @@ static void vp_set_status(struct virtio_device
> > > *vdev, u8 status)
> > >       vp_modern_set_status(&vp_dev->mdev, status);
> > >   }
> > >   -static void vp_reset(struct virtio_device *vdev)
> > > +static int vp_reset(struct virtio_device *vdev)
> > >   {
> > >       struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > >       struct virtio_pci_modern_device *mdev = &vp_dev->mdev;
> > > @@ -174,6 +174,7 @@ static void vp_reset(struct virtio_device *vdev)
> > >           msleep(1);
> > >       /* Flush pending VQ/configuration callbacks. */
> > >       vp_synchronize_vectors(vdev);
> > > +    return 0;
> > >   }
> > >     static u16 vp_config_vector(struct virtio_pci_device *vp_dev,
> > > u16 vector)
> > > diff --git a/drivers/virtio/virtio_vdpa.c b/drivers/virtio/virtio_vdpa.c
> > > index e28acf482e0c..5fd4e627a9b0 100644
> > > --- a/drivers/virtio/virtio_vdpa.c
> > > +++ b/drivers/virtio/virtio_vdpa.c
> > > @@ -97,11 +97,13 @@ static void virtio_vdpa_set_status(struct
> > > virtio_device *vdev, u8 status)
> > >       return ops->set_status(vdpa, status);
> > >   }
> > >   -static void virtio_vdpa_reset(struct virtio_device *vdev)
> > > +static int virtio_vdpa_reset(struct virtio_device *vdev)
> > >   {
> > >       struct vdpa_device *vdpa = vd_get_vdpa(vdev);
> > >         vdpa_reset(vdpa);
> > > +
> > > +    return 0;
> > >   }
> > >     static bool virtio_vdpa_notify(struct virtqueue *vq)
> > > diff --git a/include/linux/virtio_config.h
> > > b/include/linux/virtio_config.h
> > > index 8519b3ae5d52..d2b0f1699a75 100644
> > > --- a/include/linux/virtio_config.h
> > > +++ b/include/linux/virtio_config.h
> > > @@ -44,9 +44,10 @@ struct virtio_shm_region {
> > >    *    status: the new status byte
> > >    * @reset: reset the device
> > >    *    vdev: the virtio device
> > > - *    After this, status and feature negotiation must be done again
> > > + *    Upon success, status and feature negotiation must be done again
> > >    *    Device must not be reset from its vq/config callbacks, or in
> > >    *    parallel with being added/removed.
> > > + *    Returns 0 on success or error status.
> > >    * @find_vqs: find virtqueues and instantiate them.
> > >    *    vdev: the virtio_device
> > >    *    nvqs: the number of virtqueues to find
> > > @@ -82,7 +83,7 @@ struct virtio_config_ops {
> > >       u32 (*generation)(struct virtio_device *vdev);
> > >       u8 (*get_status)(struct virtio_device *vdev);
> > >       void (*set_status)(struct virtio_device *vdev, u8 status);
> > > -    void (*reset)(struct virtio_device *vdev);
> > > +    int (*reset)(struct virtio_device *vdev);
> > >       int (*find_vqs)(struct virtio_device *, unsigned nvqs,
> > >               struct virtqueue *vqs[], vq_callback_t *callbacks[],
> > >               const char * const names[], const bool *ctx,
> > 




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux