Re: [PATCH 8/9] KVM: arm64: vgic-v3: Expose GICR_TYPER.Last for userspace

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alexandru,

On 1/20/21 5:13 PM, Alexandru Elisei wrote:
> Hi Eric,
> 
> On 1/14/21 10:16 AM, Auger Eric wrote:
>> Hi Alexandru,
>>
>> On 1/12/21 6:02 PM, Alexandru Elisei wrote:
>>> Hi Eric,
>>>
>>> On 12/12/20 6:50 PM, Eric Auger wrote:
>>>> Commit 23bde34771f1 ("KVM: arm64: vgic-v3: Drop the
>>>> reporting of GICR_TYPER.Last for userspace") temporarily fixed
>>>> a bug identified when attempting to access the GICR_TYPER
>>>> register before the redistributor region setting but dropped
>>>> the support of the LAST bit. This patch restores its
>>>> support (if the redistributor region was set) while keeping the
>>>> code safe.
>>> I suppose the reason for emulating GICR_TYPER.Last is for architecture compliance,
>>> right? I think that should be in the commit message.
>> OK added this in the commit msg.
>>>> Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
>>>> ---
>>>>  arch/arm64/kvm/vgic/vgic-mmio-v3.c | 7 ++++++-
>>>>  include/kvm/arm_vgic.h             | 1 +
>>>>  2 files changed, 7 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
>>>> index 581f0f490000..2f9ef6058f6e 100644
>>>> --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
>>>> +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
>>>> @@ -277,6 +277,8 @@ static unsigned long vgic_uaccess_read_v3r_typer(struct kvm_vcpu *vcpu,
>>>>  						 gpa_t addr, unsigned int len)
>>>>  {
>>>>  	unsigned long mpidr = kvm_vcpu_get_mpidr_aff(vcpu);
>>>> +	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
>>>> +	struct vgic_redist_region *rdreg = vgic_cpu->rdreg;
>>>>  	int target_vcpu_id = vcpu->vcpu_id;
>>>>  	u64 value;
>>>>  
>>>> @@ -286,7 +288,9 @@ static unsigned long vgic_uaccess_read_v3r_typer(struct kvm_vcpu *vcpu,
>>>>  	if (vgic_has_its(vcpu->kvm))
>>>>  		value |= GICR_TYPER_PLPIS;
>>>>  
>>>> -	/* reporting of the Last bit is not supported for userspace */
>>>> +	if (rdreg && (vgic_cpu->rdreg_index == (rdreg->free_index - 1)))
>>>> +		value |= GICR_TYPER_LAST;
>>>> +
>>>>  	return extract_bytes(value, addr & 7, len);
>>>>  }
>>>>  
>>>> @@ -714,6 +718,7 @@ int vgic_register_redist_iodev(struct kvm_vcpu *vcpu)
>>>>  		return -EINVAL;
>>>>  
>>>>  	vgic_cpu->rdreg = rdreg;
>>>> +	vgic_cpu->rdreg_index = rdreg->free_index;
>>> What happens if the next redistributor region we register has the base address
>>> adjacent to this one?
>>>
>>> I'm really not familiar with the code, but is it not possible to create two
>>> Redistributor regions (via
>>> KVM_DEV_ARM_VGIC_GRP_ADDR(KVM_VGIC_V3_ADDR_TYPE_REDIST)) where the second
>>> Redistributor region start address is immediately after the last Redistributor in
>>> the preceding region?
>> KVM_VGIC_V3_ADDR_TYPE_REDIST only allows to create a single rdist
>> region. Only KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION allows to register
>> several of them.
>>
>> with KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, it is possible to register
>> adjacent rdist regions. vgic_v3_rdist_free_slot() previously returned
>> the 1st rdist region where enough space remains for inserting the new
>> reg. We put the rdist at the free index there.
>>
>> But maybe I misunderstood your question?
> 
> Yes, I think you did a good job at answering my poorly worded question.
> 
> This is the case I am concerned about:
> 
> 1. Userspace sets first redistributor base address to 0x0 via
> KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION(count = 1, base = 0x0, flags = 0, index = 0).
> 
> 2. Userspace sets first redistributor base address to 0x0 + 128K, immediately
> following the previous Redistributor.
> 
> In that case the two Redistributors will be represented by two separate struct
> vgic_redist_region, but they are adjacent to one another and represent one
> contiguous memory region.
> 
> From what I understand from your patch, GICR_TYPER.Last will be set for both
> Redistributors, when it should be set only for the second Redistributor. Does any
> of that make sense?

Please forgive me for not having replied before on this thread.

This is a valid concern. Nothing prevents the redistributor regions from
being contiguous although this is not the goal. Also nothing prevents
vcpu rdists to be laid out within a redist region in non ascending
order. Also redist regions with ascending indices may not have
increasing base addresses.

So this becomes a gas factory for emulating a single bit but I have
reworked this in v3 ;-)

Thanks

Eric





> 
> Thanks,
> Alex
>>
>> Thanks
>>
>> Eric
>>> Thanks,
>>> Alex
>>>>  
>>>>  	rd_base = rdreg->base + rdreg->free_index * KVM_VGIC_V3_REDIST_SIZE;
>>>>  
>>>> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
>>>> index a8d8fdcd3723..596c069263a7 100644
>>>> --- a/include/kvm/arm_vgic.h
>>>> +++ b/include/kvm/arm_vgic.h
>>>> @@ -322,6 +322,7 @@ struct vgic_cpu {
>>>>  	 */
>>>>  	struct vgic_io_device	rd_iodev;
>>>>  	struct vgic_redist_region *rdreg;
>>>> +	u32 rdreg_index;
>>>>  
>>>>  	/* Contains the attributes and gpa of the LPI pending tables. */
>>>>  	u64 pendbaser;
> 




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux