Re: [PATCH V2 2/4] vDPA/ifcvf: enable Intel C5000X-PL virtio-net for vDPA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/9/2021 10:42 AM, Jason Wang wrote:

On 2021/3/9 10:28 上午, Zhu, Lingshan wrote:


On 3/9/2021 10:23 AM, Jason Wang wrote:

On 2021/3/8 4:35 下午, Zhu Lingshan wrote:
This commit enabled Intel FPGA SmartNIC C5000X-PL virtio-net
for vDPA

Signed-off-by: Zhu Lingshan <lingshan.zhu@xxxxxxxxx>
---
  drivers/vdpa/ifcvf/ifcvf_base.h | 5 +++++
  drivers/vdpa/ifcvf/ifcvf_main.c | 5 +++++
  2 files changed, 10 insertions(+)

diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h b/drivers/vdpa/ifcvf/ifcvf_base.h
index 64696d63fe07..75d9a8052039 100644
--- a/drivers/vdpa/ifcvf/ifcvf_base.h
+++ b/drivers/vdpa/ifcvf/ifcvf_base.h
@@ -23,6 +23,11 @@
  #define IFCVF_SUBSYS_VENDOR_ID    0x8086
  #define IFCVF_SUBSYS_DEVICE_ID    0x001A
  +#define C5000X_PL_VENDOR_ID        0x1AF4
+#define C5000X_PL_DEVICE_ID        0x1000
+#define C5000X_PL_SUBSYS_VENDOR_ID    0x8086
+#define C5000X_PL_SUBSYS_DEVICE_ID    0x0001


I just notice that the device is a transtitional one. Any reason for doing this?

Note that IFCVF is a moden device anyhow (0x1041). Supporting legacy drive may bring many issues (e.g the definition is non-nomartive). One example is the support of VIRTIO_F_IOMMU_PLATFORM, legacy driver may assume the device can bypass IOMMU.

Thanks
Hi Jason,

This device will support virtio1.0 by default, so has VIRTIO_F_IOMMU_PLATFORM by default.


If you device want to force VIRTIO_F_IOMMU_PLATFORM you probably need to do what has been done by mlx5 (verify_min_features).

According to the spec, if VIRTIO_F_IOMMU_PLATFORM is not mandatory, when it's not negotiated, device needs to disable or bypass IOMMU:


"

If this feature bit is set to 0, then the device has same access to memory addresses supplied to it as the driver has. In particular, the device will always use physical addresses matching addresses used by the driver (typically meaning physical addresses used by the CPU) and not translated further, and can access any address supplied to it by the driver.

"
sure, I can implement code to check the feature bits.


Transitional device gives the software a chance to fall back to virtio 0.95.


This only applies if you want to passthrough the card to guest directly without the help of vDPA.

If we go with vDPA, it doesn't hlep. For virtio-vdpa, we know it will negotiated IOMMU_PLATFORM. For vhost-vdpa, Qemu can provide a legacy or transitional device on top of a modern vDPA device.

Thanks
For some cases, users may run quite out of date OS does not have vDPA nor virtio 1.0 support, transitional characters give them a chance to use the devices.

Thanks
Zhu Lingshan


ifcvf drives this device in virtio 1.0 mode, set features VIRTIO_F_IOMMU_PLATFORM successfully.

Thanks,
Zhu Lingshan


+
  #define IFCVF_SUPPORTED_FEATURES \
          ((1ULL << VIRTIO_NET_F_MAC)            | \
           (1ULL << VIRTIO_F_ANY_LAYOUT) | \
diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
index e501ee07de17..26a2dab7ca66 100644
--- a/drivers/vdpa/ifcvf/ifcvf_main.c
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
@@ -484,6 +484,11 @@ static struct pci_device_id ifcvf_pci_ids[] = {
          IFCVF_DEVICE_ID,
          IFCVF_SUBSYS_VENDOR_ID,
          IFCVF_SUBSYS_DEVICE_ID) },
+    { PCI_DEVICE_SUB(C5000X_PL_VENDOR_ID,
+             C5000X_PL_DEVICE_ID,
+             C5000X_PL_SUBSYS_VENDOR_ID,
+             C5000X_PL_SUBSYS_DEVICE_ID) },
+
      { 0 },
  };
  MODULE_DEVICE_TABLE(pci, ifcvf_pci_ids);







[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux