On Thu, Oct 08, 2009 at 05:29:29PM +0200, Avi Kivity wrote: > On 10/08/2009 04:52 PM, Michael S. Tsirkin wrote: >> PCI memory should be disabled at reset, otherwise >> we might claim transactions at address 0. >> I/O should also be disabled, although for cirrus >> it is harmless to enable it as we do not >> have I/O bar. >> >> Note: need bios fix for this patch to work: >> currently pc-bios incorrently assumes that it does not >> need to enable i/o unless device has i/o bar. >> >> Signed-off-by: Michael S. Tsirkin<mst@xxxxxxxxxx> >> --- >> hw/cirrus_vga.c | 1 - >> 1 files changed, 0 insertions(+), 1 deletions(-) >> >> diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c >> index 1feb827..c54ac65 100644 >> --- a/hw/cirrus_vga.c >> +++ b/hw/cirrus_vga.c >> @@ -3248,7 +3248,6 @@ static int pci_cirrus_vga_initfn(PCIDevice *dev) >> /* setup PCI */ >> pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_CIRRUS); >> pci_config_set_device_id(pci_conf, device_id); >> - pci_conf[0x04] = PCI_COMMAND_IOACCESS | PCI_COMMAND_MEMACCESS; >> pci_config_set_class(pci_conf, PCI_CLASS_DISPLAY_VGA); >> pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; >> > > This needs to be conditional on the machine type. Old machines must > retain this code for live migration to work (we need to live migrate the > bios, so we can't assume the bios fix is in during live migration from > older qemus). No, if you migrate from older qemu you will be fine as command is enabled there on init. Only migration *to* older qemu might create a problem and then only if you manage to migrate after pci was reset but before bios set the register, which is a small window. Do we really want to update machine type for this? > -- > error compiling committee.c: too many arguments to function -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html