[PATCHv2] seabios: enable io/memory unconditionally

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



VGA adapters need to claim memory and i/o
transactions even if they do not have any
i/o or memory bars. E.g. PCI spec, page 297,
gives an example of such a device:

    Programming interface 0000 0000b
    VGA-compatible controller. Memory
    addresses 0A 0000h through 0B
    FFFFh. I/O addresses 3B0h to 3BBh
    and 3C0h to 3DFh and all aliases of
    these addresses.

While we could check for these devices and special-case them, it is
easier to fix this by enabling i/o and memory space unconditionally:
devices that do not support it will just ignore this setting.

Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
---

Reposting for qemu tree.

 src/pciinit.c |   17 ++++++-----------
 1 files changed, 6 insertions(+), 11 deletions(-)

diff --git a/src/pciinit.c b/src/pciinit.c
index 0d558a9..eab082a 100644
--- a/src/pciinit.c
+++ b/src/pciinit.c
@@ -28,7 +28,6 @@ static u8 pci_irqs[4] = {
 
 static void pci_set_io_region_addr(u16 bdf, int region_num, u32 addr)
 {
-    u16 cmd;
     u32 ofs, old_addr;
 
     if (region_num == PCI_ROM_SLOT) {
@@ -41,16 +40,6 @@ static void pci_set_io_region_addr(u16 bdf, int region_num, u32 addr)
 
     pci_config_writel(bdf, ofs, addr);
     dprintf(1, "region %d: 0x%08x\n", region_num, addr);
-
-    /* enable memory mappings */
-    cmd = pci_config_readw(bdf, PCI_COMMAND);
-    if (region_num == PCI_ROM_SLOT)
-        cmd |= PCI_COMMAND_MEMORY;
-    else if (old_addr & PCI_BASE_ADDRESS_SPACE_IO)
-        cmd |= PCI_COMMAND_IO;
-    else
-        cmd |= PCI_COMMAND_MEMORY;
-    pci_config_writew(bdf, PCI_COMMAND, cmd);
 }
 
 /* return the global irq number corresponding to a given device irq
@@ -95,6 +84,7 @@ static void pci_bios_init_device(u16 bdf)
 {
     int class;
     u32 *paddr;
+    uint16_t cmd;
     int i, pin, pic_irq, vendor_id, device_id;
 
     class = pci_config_readw(bdf, PCI_CLASS_DEVICE);
@@ -165,6 +155,11 @@ static void pci_bios_init_device(u16 bdf)
         break;
     }
 
+    /* enable memory mappings */
+    cmd = pci_config_readw(d, PCI_COMMAND);
+    cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+    pci_config_writew(d, PCI_COMMAND, cmd);
+
     /* map the interrupt */
     pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN);
     if (pin != 0) {
-- 
1.6.5.rc2
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux