[PATCH 06/14] KVM: nVMX: Disable PML in hardware when running L2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Unconditionally disable PML in vmcs02, KVM emulates PML purely in the
MMU, e.g. vmx_flush_pml_buffer() doesn't even try to copy the L2 GPAs
from vmcs02's buffer to vmcs12.  At best, enabling PML is a nop.  At
worst, it will cause vmx_flush_pml_buffer() to record bogus GFNs in the
dirty logs.

Initialize vmcs02.GUEST_PML_INDEX such that PML writes would trigger
VM-Exit if PML was somehow enabled, skip flushing the buffer for guest
mode since the index is bogus, and freak out if a PML full exit occurs
when L2 is active.

Signed-off-by: Sean Christopherson <seanjc@xxxxxxxxxx>
---
 arch/x86/kvm/vmx/nested.c | 29 +++++++++++++++--------------
 arch/x86/kvm/vmx/vmx.c    | 12 ++++++++++--
 2 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index b2f0b5e9cd63..0c6dda9980a6 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -2167,15 +2167,13 @@ static void prepare_vmcs02_constant_state(struct vcpu_vmx *vmx)
 		vmcs_write64(MSR_BITMAP, __pa(vmx->nested.vmcs02.msr_bitmap));
 
 	/*
-	 * The PML address never changes, so it is constant in vmcs02.
-	 * Conceptually we want to copy the PML index from vmcs01 here,
-	 * and then back to vmcs01 on nested vmexit.  But since we flush
-	 * the log and reset GUEST_PML_INDEX on each vmexit, the PML
-	 * index is also effectively constant in vmcs02.
+	 * PML is emulated for L2, but never enabled in hardware as the MMU
+	 * handles A/D emulation.  Disabling PML for L2 also avoids having to
+	 * deal with filtering out L2 GPAs from the buffer.
 	 */
 	if (enable_pml) {
-		vmcs_write64(PML_ADDRESS, page_to_phys(vmx->pml_pg));
-		vmcs_write16(GUEST_PML_INDEX, PML_ENTITY_NUM - 1);
+		vmcs_write64(PML_ADDRESS, 0);
+		vmcs_write16(GUEST_PML_INDEX, -1);
 	}
 
 	if (cpu_has_vmx_encls_vmexit())
@@ -2210,7 +2208,7 @@ static void prepare_vmcs02_early_rare(struct vcpu_vmx *vmx,
 
 static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 {
-	u32 exec_control, vmcs12_exec_ctrl;
+	u32 exec_control;
 	u64 guest_efer = nested_vmx_calc_efer(vmx, vmcs12);
 
 	if (vmx->nested.dirty_vmcs12 || vmx->nested.hv_evmcs)
@@ -2284,11 +2282,11 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 				  SECONDARY_EXEC_APIC_REGISTER_VIRT |
 				  SECONDARY_EXEC_ENABLE_VMFUNC);
 		if (nested_cpu_has(vmcs12,
-				   CPU_BASED_ACTIVATE_SECONDARY_CONTROLS)) {
-			vmcs12_exec_ctrl = vmcs12->secondary_vm_exec_control &
-				~SECONDARY_EXEC_ENABLE_PML;
-			exec_control |= vmcs12_exec_ctrl;
-		}
+				   CPU_BASED_ACTIVATE_SECONDARY_CONTROLS))
+			exec_control |= vmcs12->secondary_vm_exec_control;
+
+		/* PML is emulated and never enabled in hardware for L2. */
+		exec_control &= ~SECONDARY_EXEC_ENABLE_PML;
 
 		/* VMCS shadowing for L2 is emulated for now */
 		exec_control &= ~SECONDARY_EXEC_SHADOW_VMCS;
@@ -5793,7 +5791,10 @@ static bool nested_vmx_l0_wants_exit(struct kvm_vcpu *vcpu,
 	case EXIT_REASON_PREEMPTION_TIMER:
 		return true;
 	case EXIT_REASON_PML_FULL:
-		/* We emulate PML support to L1. */
+		/*
+		 * PML is emulated for an L1 VMM and should never be enabled in
+		 * vmcs02, always "handle" PML_FULL by exiting to userspace.
+		 */
 		return true;
 	case EXIT_REASON_VMFUNC:
 		/* VM functions are emulated through L2->L0 vmexits. */
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index e0a3a9be654b..b47ed3f412ef 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -5976,9 +5976,10 @@ static int __vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
 	 * updated. Another good is, in kvm_vm_ioctl_get_dirty_log, before
 	 * querying dirty_bitmap, we only need to kick all vcpus out of guest
 	 * mode as if vcpus is in root mode, the PML buffer must has been
-	 * flushed already.
+	 * flushed already.  Note, PML is never enabled in hardware while
+	 * running L2.
 	 */
-	if (enable_pml)
+	if (enable_pml && !is_guest_mode(vcpu))
 		vmx_flush_pml_buffer(vcpu);
 
 	/*
@@ -5994,6 +5995,13 @@ static int __vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
 		return handle_invalid_guest_state(vcpu);
 
 	if (is_guest_mode(vcpu)) {
+		/*
+		 * PML is never enabled when running L2, bail immediately if a
+		 * PML full exit occurs as something is horribly wrong.
+		 */
+		if (exit_reason.basic == EXIT_REASON_PML_FULL)
+			goto unexpected_vmexit;
+
 		/*
 		 * The host physical addresses of some pages of guest memory
 		 * are loaded into the vmcs02 (e.g. vmcs12's Virtual APIC
-- 
2.30.0.478.g8a0d178c01-goog




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux