I've added too much to cstart64.S which is not start related
already. Now that I want to add even more code it's time to split
cstart64.S. lib.S has functions that are used in tests. macros.S
contains macros which are used in cstart64.S and lib.S
Signed-off-by: Janosch Frank <frankja@xxxxxxxxxxxxx>
Acked-by: Claudio Imbrenda <imbrenda@xxxxxxxxxxxxx>
---
s390x/Makefile | 6 +--
s390x/cstart64.S | 119 ++---------------------------------------------
s390x/lib.S | 65 ++++++++++++++++++++++++++
s390x/macros.S | 77 ++++++++++++++++++++++++++++++
4 files changed, 149 insertions(+), 118 deletions(-)
create mode 100644 s390x/lib.S
create mode 100644 s390x/macros.S
diff --git a/s390x/Makefile b/s390x/Makefile
index b079a26..e0bccc8 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -66,10 +66,10 @@ cflatobjs += lib/s390x/css_lib.o
OBJDIRS += lib/s390x
-cstart.o = $(TEST_DIR)/cstart64.o
+asmlib = $(TEST_DIR)/cstart64.o $(TEST_DIR)/lib.o
FLATLIBS = $(libcflat)
-%.elf: %.o $(FLATLIBS) $(SRCDIR)/s390x/flat.lds $(cstart.o)
+%.elf: %.o $(FLATLIBS) $(SRCDIR)/s390x/flat.lds $(asmlib)
$(CC) $(CFLAGS) -c -o $(@:.elf=.aux.o) \
$(SRCDIR)/lib/auxinfo.c -DPROGNAME=\"$@\"
$(CC) $(LDFLAGS) -o $@ -T $(SRCDIR)/s390x/flat.lds \
@@ -90,4 +90,4 @@ arch_clean: asm_offsets_clean
$(RM) $(TEST_DIR)/*.{o,elf,bin} $(TEST_DIR)/.*.d lib/s390x/.*.d
generated-files = $(asm-offsets)
-$(tests:.elf=.o) $(cstart.o) $(cflatobjs): $(generated-files)
+$(tests:.elf=.o) $(asmlib) $(cflatobjs): $(generated-files)
diff --git a/s390x/cstart64.S b/s390x/cstart64.S
index cc86fc7..ace0c0d 100644
--- a/s390x/cstart64.S
+++ b/s390x/cstart64.S
@@ -3,14 +3,17 @@
* s390x startup code
*
* Copyright (c) 2017 Red Hat Inc
+ * Copyright (c) 2019 IBM Corp.
*
* Authors:
* Thomas Huth <thuth@xxxxxxxxxx>
* David Hildenbrand <david@xxxxxxxxxx>
+ * Janosch Frank <frankja@xxxxxxxxxxxxx>
*/
#include <asm/asm-offsets.h>
#include <asm/sigp.h>
+#include "macros.S"
.section .init
/*
@@ -87,120 +90,7 @@ clear_bss_remainder:
memsetxc:
xc 0(1,%r1),0(%r1)
- .macro SAVE_REGS
- /* save grs 0-15 */
- stmg %r0, %r15, GEN_LC_SW_INT_GRS
- /* save crs 0-15 */
- stctg %c0, %c15, GEN_LC_SW_INT_CRS
- /* load a cr0 that has the AFP control bit which enables all FPRs */
- larl %r1, initial_cr0
- lctlg %c0, %c0, 0(%r1)
- /* save fprs 0-15 + fpc */
- la %r1, GEN_LC_SW_INT_FPRS
- .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- std \i, \i * 8(%r1)
- .endr
- stfpc GEN_LC_SW_INT_FPC
- .endm
-
- .macro RESTORE_REGS
- /* restore fprs 0-15 + fpc */
- la %r1, GEN_LC_SW_INT_FPRS
- .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- ld \i, \i * 8(%r1)
- .endr
- lfpc GEN_LC_SW_INT_FPC
- /* restore crs 0-15 */
- lctlg %c0, %c15, GEN_LC_SW_INT_CRS
- /* restore grs 0-15 */
- lmg %r0, %r15, GEN_LC_SW_INT_GRS
- .endm
-
-/* Save registers on the stack (r15), so we can have stacked interrupts. */
- .macro SAVE_REGS_STACK
- /* Allocate a stack frame for 15 general registers */
- slgfi %r15, 15 * 8
- /* Store registers r0 to r14 on the stack */
- stmg %r0, %r14, 0(%r15)
- /* Allocate a stack frame for 16 floating point registers */
- /* The size of a FP register is the size of an double word */
- slgfi %r15, 16 * 8
- /* Save fp register on stack: offset to SP is multiple of reg number */
- .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- std \i, \i * 8(%r15)
- .endr
- /* Save fpc, but keep stack aligned on 64bits */
- slgfi %r15, 8
- efpc %r0
- stg %r0, 0(%r15)
- .endm
-
-/* Restore the register in reverse order */
- .macro RESTORE_REGS_STACK
- /* Restore fpc */
- lfpc 0(%r15)
- algfi %r15, 8
- /* Restore fp register from stack: SP still where it was left */
- /* and offset to SP is a multiple of reg number */
- .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- ld \i, \i * 8(%r15)
- .endr
- /* Now that we're done, rewind the stack pointer by 16 double word */
- algfi %r15, 16 * 8
- /* Load the registers from stack */
- lmg %r0, %r14, 0(%r15)
- /* Rewind the stack by 15 double word */
- algfi %r15, 15 * 8
- .endm
-
.section .text
-/*
- * load_reset calling convention:
- * %r2 subcode (0 or 1)
- */
-.globl diag308_load_reset
-diag308_load_reset:
- SAVE_REGS
- /* Backup current PSW mask, as we have to restore it on success */
- epsw %r0, %r1
- st %r0, GEN_LC_SW_INT_PSW
- st %r1, GEN_LC_SW_INT_PSW + 4
- /* Load reset psw mask (short psw, 64 bit) */
- lg %r0, reset_psw
- /* Load the success label address */
- larl %r1, 0f
- /* Or it to the mask */
- ogr %r0, %r1
- /* Store it at the reset PSW location (real 0x0) */
- stg %r0, 0
- /* Do the reset */
- diag %r0,%r2,0x308
- /* Failure path */
- xgr %r2, %r2
- br %r14
- /* Success path */
- /* load a cr0 that has the AFP control bit which enables all FPRs */
-0: larl %r1, initial_cr0
- lctlg %c0, %c0, 0(%r1)
- RESTORE_REGS
- lhi %r2, 1
- larl %r0, 1f
- stg %r0, GEN_LC_SW_INT_PSW + 8
- lpswe GEN_LC_SW_INT_PSW
-1: br %r14
-
-.globl smp_cpu_setup_state
-smp_cpu_setup_state:
- xgr %r1, %r1
- lmg %r0, %r15, GEN_LC_SW_INT_GRS
- lctlg %c0, %c0, GEN_LC_SW_INT_CRS
- /* We should only go once through cpu setup and not for every restart */
- stg %r14, GEN_LC_RESTART_NEW_PSW + 8
- larl %r14, 0f
- lpswe GEN_LC_SW_INT_PSW
- /* If the function returns, just loop here */
-0: j 0
-
pgm_int:
SAVE_REGS
brasl %r14, handle_pgm_int
@@ -232,8 +122,6 @@ svc_int:
lpswe GEN_LC_SVC_OLD_PSW
.align 8
-reset_psw:
- .quad 0x0008000180000000
initial_psw:
.quad 0x0000000180000000, clear_bss_start
pgm_int_psw:
@@ -246,6 +134,7 @@ io_int_psw:
.quad 0x0000000180000000, io_int
svc_int_psw:
.quad 0x0000000180000000, svc_int
+.globl initial_cr0
initial_cr0:
/* enable AFP-register control, so FP regs (+BFP instr) can be used */
.quad 0x0000000000040000
diff --git a/s390x/lib.S b/s390x/lib.S
new file mode 100644
index 0000000..4d78ec6
--- /dev/null
+++ b/s390x/lib.S
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * s390x assembly library
+ *
+ * Copyright (c) 2019 IBM Corp.
+ *
+ * Authors:
+ * Janosch Frank <frankja@xxxxxxxxxxxxx>
+ */
+#include <asm/asm-offsets.h>
+#include <asm/sigp.h>
+
+#include "macros.S"
+
+/*
+ * load_reset calling convention:
+ * %r2 subcode (0 or 1)
+ */
+.globl diag308_load_reset
+diag308_load_reset:
+ SAVE_REGS
+ /* Backup current PSW mask, as we have to restore it on success */
+ epsw %r0, %r1
+ st %r0, GEN_LC_SW_INT_PSW
+ st %r1, GEN_LC_SW_INT_PSW + 4
+ /* Load reset psw mask (short psw, 64 bit) */
+ lg %r0, reset_psw
+ /* Load the success label address */
+ larl %r1, 0f
+ /* Or it to the mask */
+ ogr %r0, %r1
+ /* Store it at the reset PSW location (real 0x0) */
+ stg %r0, 0
+ /* Do the reset */
+ diag %r0,%r2,0x308
+ /* Failure path */
+ xgr %r2, %r2
+ br %r14
+ /* Success path */
+ /* load a cr0 that has the AFP control bit which enables all FPRs */
+0: larl %r1, initial_cr0
+ lctlg %c0, %c0, 0(%r1)
+ RESTORE_REGS
+ lhi %r2, 1
+ larl %r0, 1f
+ stg %r0, GEN_LC_SW_INT_PSW + 8
+ lpswe GEN_LC_SW_INT_PSW
+1: br %r14
+
+/* Sets up general registers and cr0 when a new cpu is brought online. */
+.globl smp_cpu_setup_state
+smp_cpu_setup_state:
+ xgr %r1, %r1
+ lmg %r0, %r15, GEN_LC_SW_INT_GRS
+ lctlg %c0, %c0, GEN_LC_SW_INT_CRS
+ /* We should only go once through cpu setup and not for every restart */
+ stg %r14, GEN_LC_RESTART_NEW_PSW + 8
+ larl %r14, 0f
+ lpswe GEN_LC_SW_INT_PSW
+ /* If the function returns, just loop here */
+0: j 0
+
+ .align 8
+reset_psw:
+ .quad 0x0008000180000000
diff --git a/s390x/macros.S b/s390x/macros.S
new file mode 100644
index 0000000..37a6a63
--- /dev/null
+++ b/s390x/macros.S
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * s390x assembly macros
+ *
+ * Copyright (c) 2017 Red Hat Inc
+ * Copyright (c) 2020 IBM Corp.
+ *
+ * Authors:
+ * Pierre Morel <pmorel@xxxxxxxxxxxxx>
+ * David Hildenbrand <david@xxxxxxxxxx>
+ */
+#include <asm/asm-offsets.h>
+ .macro SAVE_REGS
+ /* save grs 0-15 */
+ stmg %r0, %r15, GEN_LC_SW_INT_GRS
+ /* save crs 0-15 */
+ stctg %c0, %c15, GEN_LC_SW_INT_CRS
+ /* load a cr0 that has the AFP control bit which enables all FPRs */
+ larl %r1, initial_cr0
+ lctlg %c0, %c0, 0(%r1)
+ /* save fprs 0-15 + fpc */
+ la %r1, GEN_LC_SW_INT_FPRS
+ .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ std \i, \i * 8(%r1)
+ .endr
+ stfpc GEN_LC_SW_INT_FPC
+ .endm
+
+ .macro RESTORE_REGS
+ /* restore fprs 0-15 + fpc */
+ la %r1, GEN_LC_SW_INT_FPRS
+ .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ ld \i, \i * 8(%r1)
+ .endr
+ lfpc GEN_LC_SW_INT_FPC
+ /* restore crs 0-15 */
+ lctlg %c0, %c15, GEN_LC_SW_INT_CRS
+ /* restore grs 0-15 */
+ lmg %r0, %r15, GEN_LC_SW_INT_GRS
+ .endm
+
+/* Save registers on the stack (r15), so we can have stacked interrupts. */
+ .macro SAVE_REGS_STACK
+ /* Allocate a stack frame for 15 general registers */
+ slgfi %r15, 15 * 8
+ /* Store registers r0 to r14 on the stack */
+ stmg %r0, %r14, 0(%r15)
+ /* Allocate a stack frame for 16 floating point registers */
+ /* The size of a FP register is the size of an double word */
+ slgfi %r15, 16 * 8
+ /* Save fp register on stack: offset to SP is multiple of reg number */
+ .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ std \i, \i * 8(%r15)
+ .endr
+ /* Save fpc, but keep stack aligned on 64bits */
+ slgfi %r15, 8
+ efpc %r0
+ stg %r0, 0(%r15)
+ .endm
+
+/* Restore the register in reverse order */
+ .macro RESTORE_REGS_STACK
+ /* Restore fpc */
+ lfpc 0(%r15)
+ algfi %r15, 8
+ /* Restore fp register from stack: SP still where it was left */
+ /* and offset to SP is a multiple of reg number */
+ .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ ld \i, \i * 8(%r15)
+ .endr
+ /* Now that we're done, rewind the stack pointer by 16 double word */
+ algfi %r15, 16 * 8
+ /* Load the registers from stack */
+ lmg %r0, %r14, 0(%r15)
+ /* Rewind the stack by 15 double word */
+ algfi %r15, 15 * 8
+ .endm
--
2.25.1
