Re: [PATCH v5 00/34] SEV-ES hypervisor support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/14/20 12:13 PM, Paolo Bonzini wrote:
> On 10/12/20 18:09, Tom Lendacky wrote:
>> From: Tom Lendacky <thomas.lendacky@xxxxxxx>
>>
>> This patch series provides support for running SEV-ES guests under KVM.
>>
> 
> I'm queuing everything except patch 27, there's time to include it later
> in 5.11.
> 
> Regarding MSRs, take a look at the series I'm sending shortly (or perhaps
> in a couple hours).  For now I'll keep it in kvm/queue, but the plan is to
> get acks quickly and/or just include it in 5.11.  Please try the kvm/queue
> branch to see if I screwed up anything.

I pulled and built kvm/queue and was able to launch a single vCPU SEV-ES
guest through OVMF and part way into the kernel before I hit an error. The
kernel tries to get the AP jump table address (which was part of patch
27). If I apply the following patch (just the jump table support from
patch 27), I can successfully boot a single vCPU SEV-ES guest:

KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting

From: Tom Lendacky <thomas.lendacky@xxxxxxx>

The GHCB specification requires the hypervisor to save the address of an
AP Jump Table so that, for example, vCPUs that have been parked by UEFI
can be started by the OS. Provide support for the AP Jump Table set/get
exit code.

Signed-off-by: Tom Lendacky <thomas.lendacky@xxxxxxx>
---
 arch/x86/kvm/svm/sev.c |   28 ++++++++++++++++++++++++++++
 arch/x86/kvm/svm/svm.h |    1 +
 2 files changed, 29 insertions(+)

diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 6eb097714d43..8b5ef0fe4490 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -18,6 +18,8 @@
 #include <linux/trace_events.h>
 #include <asm/fpu/internal.h>
 
+#include <asm/trapnr.h>
+
 #include "x86.h"
 #include "svm.h"
 #include "cpuid.h"
@@ -1559,6 +1561,7 @@ static int sev_es_validate_vmgexit(struct vcpu_svm *svm)
 			goto vmgexit_err;
 		break;
 	case SVM_VMGEXIT_NMI_COMPLETE:
+	case SVM_VMGEXIT_AP_JUMP_TABLE:
 	case SVM_VMGEXIT_UNSUPPORTED_EVENT:
 		break;
 	default:
@@ -1883,6 +1886,31 @@ int sev_handle_vmgexit(struct vcpu_svm *svm)
 	case SVM_VMGEXIT_NMI_COMPLETE:
 		ret = svm_invoke_exit_handler(svm, SVM_EXIT_IRET);
 		break;
+	case SVM_VMGEXIT_AP_JUMP_TABLE: {
+		struct kvm_sev_info *sev = &to_kvm_svm(svm->vcpu.kvm)->sev_info;
+
+		switch (control->exit_info_1) {
+		case 0:
+			/* Set AP jump table address */
+			sev->ap_jump_table = control->exit_info_2;
+			break;
+		case 1:
+			/* Get AP jump table address */
+			ghcb_set_sw_exit_info_2(ghcb, sev->ap_jump_table);
+			break;
+		default:
+			pr_err("svm: vmgexit: unsupported AP jump table request - exit_info_1=%#llx\n",
+			       control->exit_info_1);
+			ghcb_set_sw_exit_info_1(ghcb, 1);
+			ghcb_set_sw_exit_info_2(ghcb,
+						X86_TRAP_UD |
+						SVM_EVTINJ_TYPE_EXEPT |
+						SVM_EVTINJ_VALID);
+		}
+
+		ret = 1;
+		break;
+	}
 	case SVM_VMGEXIT_UNSUPPORTED_EVENT:
 		vcpu_unimpl(&svm->vcpu,
 			    "vmgexit: unsupported event - exit_info_1=%#llx, exit_info_2=%#llx\n",
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index a5067f776ce0..5431e6335e2e 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -78,6 +78,7 @@ struct kvm_sev_info {
 	int fd;			/* SEV device fd */
 	unsigned long pages_locked; /* Number of pages locked */
 	struct list_head regions_list;  /* List of registered regions */
+	u64 ap_jump_table;	/* SEV-ES AP Jump Table address */
 };
 
 struct kvm_svm {



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux