Re: [PATCH RFC v4 13/15] target/riscv: Introduce dynamic time frequency for virt machine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 3, 2020 at 4:57 AM Yifei Jiang <jiangyifei@xxxxxxxxxx> wrote:
>
> Currently, time base frequency was fixed as SIFIVE_CLINT_TIMEBASE_FREQ.
> Here introduce "time-frequency" property to set time base frequency dynamically
> of which default value is still SIFIVE_CLINT_TIMEBASE_FREQ. The virt machine
> uses frequency of the first cpu to create clint and fdt.
>
> Signed-off-by: Yifei Jiang <jiangyifei@xxxxxxxxxx>
> Signed-off-by: Yipeng Yin <yinyipeng1@xxxxxxxxxx>
> ---
>  hw/riscv/virt.c    | 18 ++++++++++++++----
>  target/riscv/cpu.c |  3 +++
>  target/riscv/cpu.h |  2 ++
>  3 files changed, 19 insertions(+), 4 deletions(-)
>
> diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
> index 47b7018193..788a7237b6 100644
> --- a/hw/riscv/virt.c
> +++ b/hw/riscv/virt.c
> @@ -178,7 +178,7 @@ static void create_pcie_irq_map(void *fdt, char *nodename,
>  }
>
>  static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
> -    uint64_t mem_size, const char *cmdline)
> +    uint64_t mem_size, const char *cmdline, uint64_t timebase_frequency)
>  {
>      void *fdt;
>      int i, cpu, socket;
> @@ -225,7 +225,7 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
>
>      qemu_fdt_add_subnode(fdt, "/cpus");
>      qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
> -                          SIFIVE_CLINT_TIMEBASE_FREQ);
> +                          timebase_frequency);
>      qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
>      qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
>      qemu_fdt_add_subnode(fdt, "/cpus/cpu-map");
> @@ -510,6 +510,7 @@ static void virt_machine_init(MachineState *machine)
>      target_ulong firmware_end_addr, kernel_start_addr;
>      uint32_t fdt_load_addr;
>      uint64_t kernel_entry;
> +    uint64_t timebase_frequency = 0;
>      DeviceState *mmio_plic, *virtio_plic, *pcie_plic;
>      int i, j, base_hartid, hart_count;
>      CPUState *cs;
> @@ -553,12 +554,20 @@ static void virt_machine_init(MachineState *machine)
>                                  hart_count, &error_abort);
>          sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_abort);
>
> +        if (!timebase_frequency) {
> +            timebase_frequency = RISCV_CPU(first_cpu)->env.frequency;
> +        }
> +        /* If vcpu's time frequency is not specified, we use default frequency */
> +        if (!timebase_frequency) {
> +            timebase_frequency = SIFIVE_CLINT_TIMEBASE_FREQ;
> +        }
> +
>          /* Per-socket CLINT */
>          sifive_clint_create(
>              memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size,
>              memmap[VIRT_CLINT].size, base_hartid, hart_count,
>              SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
> -            SIFIVE_CLINT_TIMEBASE_FREQ, true);
> +            timebase_frequency, true);
>
>          /* Per-socket PLIC hart topology configuration string */
>          plic_hart_config_len =
> @@ -610,7 +619,8 @@ static void virt_machine_init(MachineState *machine)
>          main_mem);
>
>      /* create device tree */
> -    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
> +    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
> +               timebase_frequency);
>
>      /* boot rom */
>      memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 439dc89ee7..66f35bcbbf 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -494,6 +494,8 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
>
>      riscv_cpu_register_gdb_regs_for_features(cs);
>
> +    env->user_frequency = env->frequency;
> +
>      qemu_init_vcpu(cs);
>      cpu_reset(cs);
>
> @@ -531,6 +533,7 @@ static Property riscv_cpu_properties[] = {
>      DEFINE_PROP_BOOL("mmu", RISCVCPU, cfg.mmu, true),
>      DEFINE_PROP_BOOL("pmp", RISCVCPU, cfg.pmp, true),
>      DEFINE_PROP_UINT64("resetvec", RISCVCPU, cfg.resetvec, DEFAULT_RSTVEC),
> +    DEFINE_PROP_UINT64("time-frequency", RISCVCPU, env.frequency, 0),

Why not set the default to SIFIVE_CLINT_TIMEBASE_FREQ?

Also, QEMU now has a clock API, is using that instead a better option?

Alistair

>      DEFINE_PROP_END_OF_LIST(),
>  };
>
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index 16d6050ead..f5b6c34176 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -243,6 +243,8 @@ struct CPURISCVState {
>      uint64_t kvm_timer_time;
>      uint64_t kvm_timer_compare;
>      uint64_t kvm_timer_state;
> +    uint64_t user_frequency;
> +    uint64_t frequency;
>  };
>
>  OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass,
> --
> 2.19.1
>
>



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux