Re: [PATCH RFC v4 06/15] target/riscv: Support start kernel directly by KVM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 3, 2020 at 4:58 AM Yifei Jiang <jiangyifei@xxxxxxxxxx> wrote:
>
> Get kernel and fdt start address in virt.c, and pass them to KVM
> when cpu reset. In addition, add kvm_riscv.h to place riscv specific
> interface.

This doesn't seem right. Why do we need to do this? Other
architectures don't seem to do this.

Writing to the CPU from the board like this looks fishy and probably
breaks some QOM rules.

Alistair

>
> Signed-off-by: Yifei Jiang <jiangyifei@xxxxxxxxxx>
> Signed-off-by: Yipeng Yin <yinyipeng1@xxxxxxxxxx>
> ---
>  hw/riscv/virt.c          |  8 ++++++++
>  target/riscv/cpu.c       |  4 ++++
>  target/riscv/cpu.h       |  3 +++
>  target/riscv/kvm.c       | 15 +++++++++++++++
>  target/riscv/kvm_riscv.h | 24 ++++++++++++++++++++++++
>  5 files changed, 54 insertions(+)
>  create mode 100644 target/riscv/kvm_riscv.h
>
> diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
> index 25cea7aa67..47b7018193 100644
> --- a/hw/riscv/virt.c
> +++ b/hw/riscv/virt.c
> @@ -42,6 +42,7 @@
>  #include "sysemu/sysemu.h"
>  #include "hw/pci/pci.h"
>  #include "hw/pci-host/gpex.h"
> +#include "sysemu/kvm.h"
>
>  #if defined(TARGET_RISCV32)
>  # define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin"
> @@ -511,6 +512,7 @@ static void virt_machine_init(MachineState *machine)
>      uint64_t kernel_entry;
>      DeviceState *mmio_plic, *virtio_plic, *pcie_plic;
>      int i, j, base_hartid, hart_count;
> +    CPUState *cs;
>
>      /* Check socket count limit */
>      if (VIRT_SOCKETS_MAX < riscv_socket_count(machine)) {
> @@ -660,6 +662,12 @@ static void virt_machine_init(MachineState *machine)
>                                virt_memmap[VIRT_MROM].size, kernel_entry,
>                                fdt_load_addr, s->fdt);
>
> +    for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) {
> +        RISCVCPU *riscv_cpu = RISCV_CPU(cs);
> +        riscv_cpu->env.kernel_addr = kernel_entry;
> +        riscv_cpu->env.fdt_addr = fdt_load_addr;
> +    }
> +
>      /* SiFive Test MMIO device */
>      sifive_test_create(memmap[VIRT_TEST].base);
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 6a0264fc6b..faee98a58c 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -29,6 +29,7 @@
>  #include "hw/qdev-properties.h"
>  #include "migration/vmstate.h"
>  #include "fpu/softfloat-helpers.h"
> +#include "kvm_riscv.h"
>
>  /* RISC-V CPU definitions */
>
> @@ -330,6 +331,9 @@ static void riscv_cpu_reset(DeviceState *dev)
>      cs->exception_index = EXCP_NONE;
>      env->load_res = -1;
>      set_default_nan_mode(1, &env->fp_status);
> +#ifdef CONFIG_KVM
> +    kvm_riscv_reset_vcpu(cpu);
> +#endif
>  }
>
>  static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index c0a326c843..ad1c90f798 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -233,6 +233,9 @@ struct CPURISCVState {
>
>      /* Fields from here on are preserved across CPU reset. */
>      QEMUTimer *timer; /* Internal timer */
> +
> +    hwaddr kernel_addr;
> +    hwaddr fdt_addr;
>  };
>
>  OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass,
> diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
> index 8b206ce99c..6250ca0c7d 100644
> --- a/target/riscv/kvm.c
> +++ b/target/riscv/kvm.c
> @@ -37,6 +37,7 @@
>  #include "hw/irq.h"
>  #include "qemu/log.h"
>  #include "hw/loader.h"
> +#include "kvm_riscv.h"
>
>  static __u64 kvm_riscv_reg_id(__u64 type, __u64 idx)
>  {
> @@ -439,3 +440,17 @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
>  {
>      return 0;
>  }
> +
> +void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
> +{
> +    CPURISCVState *env = &cpu->env;
> +
> +    if (!kvm_enabled()) {
> +        return;
> +    }
> +    env->pc = cpu->env.kernel_addr;
> +    env->gpr[10] = kvm_arch_vcpu_id(CPU(cpu)); /* a0 */
> +    env->gpr[11] = cpu->env.fdt_addr;          /* a1 */
> +    env->satp = 0;
> +}
> +
> diff --git a/target/riscv/kvm_riscv.h b/target/riscv/kvm_riscv.h
> new file mode 100644
> index 0000000000..f38c82bf59
> --- /dev/null
> +++ b/target/riscv/kvm_riscv.h
> @@ -0,0 +1,24 @@
> +/*
> + * QEMU KVM support -- RISC-V specific functions.
> + *
> + * Copyright (c) 2020 Huawei Technologies Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef QEMU_KVM_RISCV_H
> +#define QEMU_KVM_RISCV_H
> +
> +void kvm_riscv_reset_vcpu(RISCVCPU *cpu);
> +
> +#endif
> --
> 2.19.1
>
>



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux