From: Tom Lendacky <thomas.lendacky@xxxxxxx> This patch series provides support for running SEV-ES guests under KVM. Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands on the SEV support to protect the guest register state from the hypervisor. See "AMD64 Architecture Programmer's Manual Volume 2: System Programming", section "15.35 Encrypted State (SEV-ES)" [1]. In order to allow a hypervisor to perform functions on behalf of a guest, there is architectural support for notifying a guest's operating system when certain types of VMEXITs are about to occur. This allows the guest to selectively share information with the hypervisor to satisfy the requested function. The notification is performed using a new exception, the VMM Communication exception (#VC). The information is shared through the Guest-Hypervisor Communication Block (GHCB) using the VMGEXIT instruction. The GHCB format and the protocol for using it is documented in "SEV-ES Guest-Hypervisor Communication Block Standardization" [2]. Under SEV-ES, a vCPU save area (VMSA) must be encrypted. SVM is updated to build the initial VMSA and then encrypt it before running the guest. Once encrypted, it must not be modified by the hypervisor. Modification of the VMSA will result in the VMRUN instruction failing with a SHUTDOWN exit code. KVM must support the VMGEXIT exit code in order to perform the necessary functions required of the guest. The GHCB is used to exchange the information needed by both the hypervisor and the guest. Register data from the GHCB is copied into the KVM register variables and accessed as usual during handling of the exit. Upon return to the guest, updated registers are copied back to the GHCB for the guest to act upon. There are changes to some of the intercepts that are needed under SEV-ES. For example, CR0 writes cannot be intercepted, so the code needs to ensure that the intercept is not enabled during execution or that the hypervisor does not try to read the register as part of exit processing. Another example is shutdown processing, where the vCPU cannot be directly reset. Support is added to handle VMGEXIT events and implement the GHCB protocol. This includes supporting standard exit events, like a CPUID instruction intercept, to new support, for things like AP processor booting. Much of the existing SVM intercept support can be re-used by setting the exit code information from the VMGEXIT and calling the appropriate intercept handlers. Finally, to launch and run an SEV-ES guest requires changes to the vCPU initialization, loading and execution. [1] https://www.amd.com/system/files/TechDocs/24593.pdf [2] https://developer.amd.com/wp-content/resources/56421.pdf --- These patches are based on the KVM next branch: https://git.kernel.org/pub/scm/virt/kvm/kvm.git next 6d6a18fdde8b ("KVM: selftests: allow two iterations of dirty_log_perf_test") A version of the tree can also be found at: https://github.com/AMDESE/linux/tree/sev-es-v4 Changes from v3: - Some krobot fixes. - Some checkpatch cleanups. Changes from v2: - Update the freeing of the VMSA page to account for the encrypted memory cache coherency feature as well as the VM page flush feature. - Update the GHCB dump function with a bit more detail. - Don't check for RAX being present as part of a string IO operation. - Include RSI when syncing from GHCB to support KVM hypercall arguments. - Add GHCB usage field validation check. Changes from v1: - Removed the VMSA indirection support: - On LAUNCH_UPDATE_VMSA, sync traditional VMSA over to the new SEV-ES VMSA area to be encrypted. - On VMGEXIT VMEXIT, directly copy valid registers into vCPU arch register array from GHCB. On VMRUN (following a VMGEXIT), directly copy dirty vCPU arch registers to GHCB. - Removed reg_read_override()/reg_write_override() KVM ops. - Added VMGEXIT exit-reason validation. - Changed kvm_vcpu_arch variable vmsa_encrypted to guest_state_protected - Updated the tracking support for EFER/CR0/CR4/CR8 to minimize changes to the x86.c code - Updated __set_sregs to not set any register values (previously supported setting the tracked values of EFER/CR0/CR4/CR8) - Added support for reporting SMM capability at the VM-level. This allows an SEV-ES guest to indicate SMM is not supported - Updated FPU support to check for a guest FPU save area before using it. Updated SVM to free guest FPU for an SEV-ES guest during KVM create_vcpu op. - Removed changes to the kvm_skip_emulated_instruction() - Added VMSA validity checks before invoking LAUNCH_UPDATE_VMSA - Minor code restructuring in areas for better readability Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx> Cc: Jim Mattson <jmattson@xxxxxxxxxx> Cc: Joerg Roedel <joro@xxxxxxxxxx> Cc: Sean Christopherson <sean.j.christopherson@xxxxxxxxx> Cc: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx> Cc: Wanpeng Li <wanpengli@xxxxxxxxxxx> Cc: Borislav Petkov <bp@xxxxxxxxx> Cc: Ingo Molnar <mingo@xxxxxxxxxx> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Cc: Brijesh Singh <brijesh.singh@xxxxxxx> Tom Lendacky (34): x86/cpu: Add VM page flush MSR availablility as a CPUID feature KVM: SVM: Remove the call to sev_platform_status() during setup KVM: SVM: Add support for SEV-ES capability in KVM KVM: SVM: Add GHCB accessor functions for retrieving fields KVM: SVM: Add support for the SEV-ES VMSA KVM: x86: Mark GPRs dirty when written KVM: SVM: Add required changes to support intercepts under SEV-ES KVM: SVM: Prevent debugging under SEV-ES KVM: SVM: Do not allow instruction emulation under SEV-ES KVM: SVM: Cannot re-initialize the VMCB after shutdown with SEV-ES KVM: SVM: Prepare for SEV-ES exit handling in the sev.c file KVM: SVM: Add initial support for a VMGEXIT VMEXIT KVM: SVM: Create trace events for VMGEXIT processing KVM: SVM: Add support for SEV-ES GHCB MSR protocol function 0x002 KVM: SVM: Add support for SEV-ES GHCB MSR protocol function 0x004 KVM: SVM: Add support for SEV-ES GHCB MSR protocol function 0x100 KVM: SVM: Create trace events for VMGEXIT MSR protocol processing KVM: SVM: Support MMIO for an SEV-ES guest KVM: SVM: Support string IO operations for an SEV-ES guest KVM: SVM: Add support for EFER write traps for an SEV-ES guest KVM: SVM: Add support for CR0 write traps for an SEV-ES guest KVM: SVM: Add support for CR4 write traps for an SEV-ES guest KVM: SVM: Add support for CR8 write traps for an SEV-ES guest KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES KVM: SVM: Do not report support for SMM for an SEV-ES guest KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest KVM: SVM: Add support for booting APs for an SEV-ES guest KVM: SVM: Add NMI support for an SEV-ES guest KVM: SVM: Set the encryption mask for the SVM host save area KVM: SVM: Update ASID allocation to support SEV-ES guests KVM: SVM: Provide support for SEV-ES vCPU creation/loading KVM: SVM: Provide support for SEV-ES vCPU loading KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests KVM: SVM: Provide support to launch and run an SEV-ES guest arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/kvm_host.h | 12 +- arch/x86/include/asm/msr-index.h | 1 + arch/x86/include/asm/svm.h | 40 +- arch/x86/include/uapi/asm/svm.h | 28 + arch/x86/kernel/cpu/scattered.c | 1 + arch/x86/kernel/cpu/vmware.c | 12 +- arch/x86/kvm/Kconfig | 3 +- arch/x86/kvm/cpuid.c | 1 + arch/x86/kvm/kvm_cache_regs.h | 51 +- arch/x86/kvm/svm/sev.c | 933 +++++++++++++++++++++++++++-- arch/x86/kvm/svm/svm.c | 442 +++++++++++--- arch/x86/kvm/svm/svm.h | 166 ++++- arch/x86/kvm/svm/vmenter.S | 50 ++ arch/x86/kvm/trace.h | 97 +++ arch/x86/kvm/vmx/vmx.c | 6 +- arch/x86/kvm/x86.c | 368 ++++++++++-- arch/x86/kvm/x86.h | 9 + 18 files changed, 1971 insertions(+), 250 deletions(-) base-commit: 6d6a18fdde8b86b919b740ad629153de432d12a8 -- 2.28.0
