On Thu, Sep 10, 2020 at 04:37:51PM +0800, Chenyi Qiang wrote:
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 5303dbc5c9bc..8059b8b21ecd 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -961,6 +961,9 @@ struct kvm_arch {
> bool guest_can_read_msr_platform_info;
> bool exception_payload_enabled;
>
> + /* Set when bus lock vm exit is enabled by user */
> + bool bus_lock_exit;
Maybe bus_lock_detection_enabled? Then you don't need the comment or the
accessor.
> +
> struct kvm_pmu_event_filter *pmu_event_filter;
> struct task_struct *nx_lpage_recovery_thread;
> };
> @@ -1347,6 +1350,8 @@ extern u8 kvm_tsc_scaling_ratio_frac_bits;
> extern u64 kvm_max_tsc_scaling_ratio;
> /* 1ull << kvm_tsc_scaling_ratio_frac_bits */
> extern u64 kvm_default_tsc_scaling_ratio;
> +/* bus lock detection supported */
> +extern bool kvm_has_bus_lock_exit;
Hrm, it'd be nice to somehow squeeze this into kvm_cpu_caps, but I can't
think of a clever/clean way to do so.
> extern u64 kvm_mce_cap_supported;
>
> diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
> index cd7de4b401fe..93a880bc31a7 100644
> --- a/arch/x86/include/asm/vmx.h
> +++ b/arch/x86/include/asm/vmx.h
> @@ -73,6 +73,7 @@
> #define SECONDARY_EXEC_PT_USE_GPA VMCS_CONTROL_BIT(PT_USE_GPA)
> #define SECONDARY_EXEC_TSC_SCALING VMCS_CONTROL_BIT(TSC_SCALING)
> #define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE VMCS_CONTROL_BIT(USR_WAIT_PAUSE)
> +#define SECONDARY_EXEC_BUS_LOCK_DETECTION VMCS_CONTROL_BIT(BUS_LOCK_DETECTION)
>
> #define PIN_BASED_EXT_INTR_MASK VMCS_CONTROL_BIT(INTR_EXITING)
> #define PIN_BASED_NMI_EXITING VMCS_CONTROL_BIT(NMI_EXITING)
> diff --git a/arch/x86/include/asm/vmxfeatures.h b/arch/x86/include/asm/vmxfeatures.h
> index 9915990fd8cf..e80523346274 100644
> --- a/arch/x86/include/asm/vmxfeatures.h
> +++ b/arch/x86/include/asm/vmxfeatures.h
> @@ -83,5 +83,6 @@
> #define VMX_FEATURE_TSC_SCALING ( 2*32+ 25) /* Scale hardware TSC when read in guest */
> #define VMX_FEATURE_USR_WAIT_PAUSE ( 2*32+ 26) /* Enable TPAUSE, UMONITOR, UMWAIT in guest */
> #define VMX_FEATURE_ENCLV_EXITING ( 2*32+ 28) /* "" VM-Exit on ENCLV (leaf dependent) */
> +#define VMX_FEATURE_BUS_LOCK_DETECTION ( 2*32+ 30) /* VM-Exit when bus lock caused */
>
> #endif /* _ASM_X86_VMXFEATURES_H */
> diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
> index 0780f97c1850..a1471c05f7f9 100644
> --- a/arch/x86/include/uapi/asm/kvm.h
> +++ b/arch/x86/include/uapi/asm/kvm.h
> @@ -111,6 +111,7 @@ struct kvm_ioapic_state {
> #define KVM_NR_IRQCHIPS 3
>
> #define KVM_RUN_X86_SMM (1 << 0)
> +#define KVM_RUN_BUS_LOCK (1 << 1)
>
> /* for KVM_GET_REGS and KVM_SET_REGS */
> struct kvm_regs {
> diff --git a/arch/x86/include/uapi/asm/vmx.h b/arch/x86/include/uapi/asm/vmx.h
> index b8ff9e8ac0d5..14c177c4afd5 100644
> --- a/arch/x86/include/uapi/asm/vmx.h
> +++ b/arch/x86/include/uapi/asm/vmx.h
> @@ -88,6 +88,7 @@
> #define EXIT_REASON_XRSTORS 64
> #define EXIT_REASON_UMWAIT 67
> #define EXIT_REASON_TPAUSE 68
> +#define EXIT_REASON_BUS_LOCK 74
>
> #define VMX_EXIT_REASONS \
> { EXIT_REASON_EXCEPTION_NMI, "EXCEPTION_NMI" }, \
> @@ -148,7 +149,8 @@
> { EXIT_REASON_XSAVES, "XSAVES" }, \
> { EXIT_REASON_XRSTORS, "XRSTORS" }, \
> { EXIT_REASON_UMWAIT, "UMWAIT" }, \
> - { EXIT_REASON_TPAUSE, "TPAUSE" }
> + { EXIT_REASON_TPAUSE, "TPAUSE" }, \
> + { EXIT_REASON_BUS_LOCK, "BUS_LOCK" }
>
> #define VMX_EXIT_REASON_FLAGS \
> { VMX_EXIT_REASONS_FAILED_VMENTRY, "FAILED_VMENTRY" }
> diff --git a/arch/x86/kvm/vmx/capabilities.h b/arch/x86/kvm/vmx/capabilities.h
> index 4bbd8b448d22..aa94535e6705 100644
> --- a/arch/x86/kvm/vmx/capabilities.h
> +++ b/arch/x86/kvm/vmx/capabilities.h
> @@ -262,6 +262,12 @@ static inline bool cpu_has_vmx_tsc_scaling(void)
> SECONDARY_EXEC_TSC_SCALING;
> }
>
> +static inline bool cpu_has_vmx_bus_lock_detection(void)
> +{
> + return vmcs_config.cpu_based_2nd_exec_ctrl &
> + SECONDARY_EXEC_BUS_LOCK_DETECTION;
> +}
> +
> static inline bool cpu_has_vmx_apicv(void)
> {
> return cpu_has_vmx_apic_register_virt() &&
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index adc59cf9036d..5dbfee639375 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -2461,7 +2461,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |
> SECONDARY_EXEC_PT_USE_GPA |
> SECONDARY_EXEC_PT_CONCEAL_VMX |
> - SECONDARY_EXEC_ENABLE_VMFUNC;
> + SECONDARY_EXEC_ENABLE_VMFUNC |
> + SECONDARY_EXEC_BUS_LOCK_DETECTION;
> if (cpu_has_sgx())
> opt2 |= SECONDARY_EXEC_ENCLS_EXITING;
> if (adjust_vmx_controls(min2, opt2,
> @@ -4244,6 +4245,9 @@ static void vmx_compute_secondary_exec_control(struct vcpu_vmx *vmx)
> }
> }
>
> + if (!kvm_bus_lock_exit_enabled(vmx->vcpu.kvm))
> + exec_control &= ~SECONDARY_EXEC_BUS_LOCK_DETECTION;
> +
> vmx->secondary_exec_control = exec_control;
> }
>
> @@ -5685,6 +5689,14 @@ static int handle_encls(struct kvm_vcpu *vcpu)
> return 1;
> }
>
> +static int handle_bus_lock(struct kvm_vcpu *vcpu)
> +{
> + struct kvm_run *kvm_run = vcpu->run;
> +
> + kvm_run->exit_reason = KVM_EXIT_BUS_LOCK;
No need for kvm_run, "vcpu->run->exit_reason = KVM_EXIT_BUS_LOCK" will do.
> + return 0;
> +}
> +
> /*
> * The exit handlers return 1 if the exit was handled fully and guest execution
> * may resume. Otherwise they set the kvm_run parameter to indicate what needs
> @@ -5741,6 +5753,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
> [EXIT_REASON_VMFUNC] = handle_vmx_instruction,
> [EXIT_REASON_PREEMPTION_TIMER] = handle_preemption_timer,
> [EXIT_REASON_ENCLS] = handle_encls,
> + [EXIT_REASON_BUS_LOCK] = handle_bus_lock,
> };
>
> static const int kvm_vmx_max_exit_handlers =
> @@ -5979,7 +5992,7 @@ void dump_vmcs(void)
> * The guest has exited. See if we can fix it or if we need userspace
> * assistance.
> */
> -static int vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
> +static int __vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
> {
> struct vcpu_vmx *vmx = to_vmx(vcpu);
> union vmx_exit_reason exit_reason = vmx->exit_reason;
> @@ -6131,6 +6144,28 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
> return 0;
> }
>
> +static int vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
> +{
> + struct vcpu_vmx *vmx = to_vmx(vcpu);
Personal preference, but I'd probably skip the local 'vmx' variable since
there's only a single user, i.e. "to_vmx(vcpu)->exit_reason....".
> + int ret = __vmx_handle_exit(vcpu, exit_fastpath);
> +
> + /*
> + * Even when current exit reason is handled by KVM
> + * internally, we still needs to exit to user space
> + * when bus lock detected to inform that there is a
> + * bus lock in guest.
Run these lines out to the edge of 80 chars, wrapping this aggressively just
adds extra lines.
> + */
> + if (vmx->exit_reason.bus_lock_detected) {
> + if (ret > 0)
> + vcpu->run->exit_reason = KVM_EXIT_BUS_LOCK;
> + else
> + vcpu->run->flags |= KVM_RUN_BUS_LOCK;
> + return 0;
> + }
> + vcpu->run->flags &= ~KVM_RUN_BUS_LOCK;
> + return ret;
> +}
> +
> /*
> * Software based L1D cache flush which is used when microcode providing
> * the cache control MSR is not loaded.
> @@ -8097,6 +8132,9 @@ static __init int hardware_setup(void)
> kvm_tsc_scaling_ratio_frac_bits = 48;
> }
>
> + if (cpu_has_vmx_bus_lock_detection())
> + kvm_has_bus_lock_exit = true;
Or simply:
kvm_has_bus_lock_exit = cpu_has_vmx_bus_lock_detection();
> +
> set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
>
> if (enable_ept)
> diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
> index 8bf97a81affd..779ea3b15134 100644
> --- a/arch/x86/kvm/vmx/vmx.h
> +++ b/arch/x86/kvm/vmx/vmx.h
> @@ -105,7 +105,7 @@ union vmx_exit_reason {
> u32 reserved23 : 1;
> u32 reserved24 : 1;
> u32 reserved25 : 1;
> - u32 reserved26 : 1;
> + u32 bus_lock_detected : 1;
> u32 enclave_mode : 1;
> u32 smi_pending_mtf : 1;
> u32 smi_from_vmx_root : 1;
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index d39d6cf1d473..d96619ce7f66 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -134,6 +134,8 @@ u64 __read_mostly kvm_max_tsc_scaling_ratio;
> EXPORT_SYMBOL_GPL(kvm_max_tsc_scaling_ratio);
> u64 __read_mostly kvm_default_tsc_scaling_ratio;
> EXPORT_SYMBOL_GPL(kvm_default_tsc_scaling_ratio);
> +bool __read_mostly kvm_has_bus_lock_exit;
> +EXPORT_SYMBOL_GPL(kvm_has_bus_lock_exit);
>
> /* tsc tolerance in parts per million - default to 1/2 of the NTP threshold */
> static u32 __read_mostly tsc_tolerance_ppm = 250;
> @@ -3578,6 +3580,11 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
> case KVM_CAP_SMALLER_MAXPHYADDR:
> r = (int) allow_smaller_maxphyaddr;
> break;
> + case KVM_CAP_X86_BUS_LOCK_EXIT:
Hmm, it might make more sense to do:
if (kvm_has_bus_lock_exit)
r = KVM_BUS_LOCK_DETECTION_OFF |
KVM_BUS_LOCK_DETECTION_EXIT;
else
r = 0;
On the other hand I can see it being useful for userspace to know that
KVM itself supports bus lock detection, but hardware does not.
> + r |= KVM_BUS_LOCK_DETECTION_OFF;
> + if (kvm_has_bus_lock_exit)
> + r |= KVM_BUS_LOCK_DETECTION_EXIT;
> + break;
> default:
> break;
> }
> @@ -5030,6 +5037,20 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
> kvm->arch.exception_payload_enabled = cap->args[0];
> r = 0;
> break;
> + case KVM_CAP_X86_BUS_LOCK_EXIT:
> + r = -EINVAL;
> + if (cap->args[0] & ~KVM_BUS_LOCK_DETECTION_VALID_MODE)
> + break;
> +
> + if ((cap->args[0] & KVM_BUS_LOCK_DETECTION_OFF) &&
> + (cap->args[0] & KVM_BUS_LOCK_DETECTION_EXIT))
> + break;
> +
> + if (kvm_has_bus_lock_exit &&
> + cap->args[0] & KVM_BUS_LOCK_DETECTION_EXIT)
> + kvm->arch.bus_lock_exit = true;
> + r = 0;
> + break;
> default:
> r = -EINVAL;
> break;
> @@ -7772,12 +7793,16 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu)
> struct kvm_run *kvm_run = vcpu->run;
>
> kvm_run->if_flag = (kvm_get_rflags(vcpu) & X86_EFLAGS_IF) != 0;
> - kvm_run->flags = is_smm(vcpu) ? KVM_RUN_X86_SMM : 0;
> kvm_run->cr8 = kvm_get_cr8(vcpu);
> kvm_run->apic_base = kvm_get_apic_base(vcpu);
> kvm_run->ready_for_interrupt_injection =
> pic_in_kernel(vcpu->kvm) ||
> kvm_vcpu_ready_for_interrupt_injection(vcpu);
> +
> + if (is_smm(vcpu))
> + kvm_run->flags |= KVM_RUN_X86_SMM;
> + else
> + kvm_run->flags &= ~KVM_RUN_X86_SMM;
> }
>
> static void update_cr8_intercept(struct kvm_vcpu *vcpu)
> diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
> index 995ab696dcf0..54aa7712cb52 100644
> --- a/arch/x86/kvm/x86.h
> +++ b/arch/x86/kvm/x86.h
> @@ -335,6 +335,11 @@ static inline bool kvm_cstate_in_guest(struct kvm *kvm)
> return kvm->arch.cstate_in_guest;
> }
>
> +static inline bool kvm_bus_lock_exit_enabled(struct kvm *kvm)
I don't see any point in adding an accessor for a bool.
> +{
> + return kvm->arch.bus_lock_exit;
> +}
> +
> DECLARE_PER_CPU(struct kvm_vcpu *, current_vcpu);
>
> static inline void kvm_before_interrupt(struct kvm_vcpu *vcpu)
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index f6d86033c4fa..3f0176733622 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -248,6 +248,7 @@ struct kvm_hyperv_exit {
> #define KVM_EXIT_IOAPIC_EOI 26
> #define KVM_EXIT_HYPERV 27
> #define KVM_EXIT_ARM_NISV 28
> +#define KVM_EXIT_BUS_LOCK 29
>
> /* For KVM_EXIT_INTERNAL_ERROR */
> /* Emulate instruction failed. */
> @@ -1035,6 +1036,7 @@ struct kvm_ppc_resize_hpt {
> #define KVM_CAP_LAST_CPU 184
> #define KVM_CAP_SMALLER_MAXPHYADDR 185
> #define KVM_CAP_S390_DIAG318 186
> +#define KVM_CAP_X86_BUS_LOCK_EXIT 187
>
> #ifdef KVM_CAP_IRQ_ROUTING
>
> @@ -1689,4 +1691,9 @@ struct kvm_hyperv_eventfd {
> #define KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (1 << 0)
> #define KVM_DIRTY_LOG_INITIALLY_SET (1 << 1)
>
> +#define KVM_BUS_LOCK_DETECTION_OFF (1 << 0)
> +#define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1)
> +#define KVM_BUS_LOCK_DETECTION_VALID_MODE (KVM_BUS_LOCK_DETECTION_OFF | \
> + KVM_BUS_LOCK_DETECTION_EXIT)
I don't think we want to define KVM_BUS_LOCK_DETECTION_VALID_MODE in the
uapi header, that should be kernel only.
> +
> #endif /* __LINUX_KVM_H */
> --
> 2.17.1
>
