[PATCH v7 70/72] x86/sev-es: Handle NMI State

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Joerg Roedel <jroedel@xxxxxxx>

When running under SEV-ES the kernel has to tell the hypervisor when to
open the NMI window again after an NMI was injected. This is done with
an NMI-complete message to the hypervisor.

Add code to the kernels NMI handler to send this message right at the
beginning of do_nmi(). This always allows nesting NMIs.

Signed-off-by: Joerg Roedel <jroedel@xxxxxxx>
---
 arch/x86/include/asm/sev-es.h   |  7 +++++++
 arch/x86/include/uapi/asm/svm.h |  1 +
 arch/x86/kernel/nmi.c           |  6 ++++++
 arch/x86/kernel/sev-es.c        | 18 ++++++++++++++++++
 4 files changed, 32 insertions(+)

diff --git a/arch/x86/include/asm/sev-es.h b/arch/x86/include/asm/sev-es.h
index db88e1c3442d..e919f09ae33c 100644
--- a/arch/x86/include/asm/sev-es.h
+++ b/arch/x86/include/asm/sev-es.h
@@ -96,10 +96,17 @@ static __always_inline void sev_es_ist_exit(void)
 		__sev_es_ist_exit();
 }
 extern int sev_es_setup_ap_jump_table(struct real_mode_header *rmh);
+extern void __sev_es_nmi_complete(void);
+static __always_inline void sev_es_nmi_complete(void)
+{
+	if (static_branch_unlikely(&sev_es_enable_key))
+		__sev_es_nmi_complete();
+}
 #else
 static inline void sev_es_ist_enter(struct pt_regs *regs) { }
 static inline void sev_es_ist_exit(void) { }
 static inline int sev_es_setup_ap_jump_table(struct real_mode_header *rmh) { return 0; }
+static inline void sev_es_nmi_complete(void) { }
 #endif
 
 #endif
diff --git a/arch/x86/include/uapi/asm/svm.h b/arch/x86/include/uapi/asm/svm.h
index c1dcf3e114e4..a7a3403645e5 100644
--- a/arch/x86/include/uapi/asm/svm.h
+++ b/arch/x86/include/uapi/asm/svm.h
@@ -84,6 +84,7 @@
 /* SEV-ES software-defined VMGEXIT events */
 #define SVM_VMGEXIT_MMIO_READ			0x80000001
 #define SVM_VMGEXIT_MMIO_WRITE			0x80000002
+#define SVM_VMGEXIT_NMI_COMPLETE		0x80000003
 #define SVM_VMGEXIT_AP_HLT_LOOP			0x80000004
 #define SVM_VMGEXIT_AP_JUMP_TABLE		0x80000005
 #define SVM_VMGEXIT_SET_AP_JUMP_TABLE		0
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 5859cec774a4..d961f1b3e251 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -478,6 +478,12 @@ DEFINE_IDTENTRY_RAW(exc_nmi)
 {
 	bool irq_state;
 
+	/*
+	 * Re-enable NMIs right here when running as an SEV-ES guest. This might
+	 * cause nested NMIs, but those can be handled safely.
+	 */
+	sev_es_nmi_complete();
+
 	if (IS_ENABLED(CONFIG_SMP) && arch_cpu_is_offline(smp_processor_id()))
 		return;
 
diff --git a/arch/x86/kernel/sev-es.c b/arch/x86/kernel/sev-es.c
index 0b6c4f46ddfc..9ab3a4dfecd8 100644
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -408,6 +408,24 @@ static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
 /* Include code shared with pre-decompression boot stage */
 #include "sev-es-shared.c"
 
+void __sev_es_nmi_complete(void)
+{
+	struct ghcb_state state;
+	struct ghcb *ghcb;
+
+	ghcb = sev_es_get_ghcb(&state);
+
+	vc_ghcb_invalidate(ghcb);
+	ghcb_set_sw_exit_code(ghcb, SVM_VMGEXIT_NMI_COMPLETE);
+	ghcb_set_sw_exit_info_1(ghcb, 0);
+	ghcb_set_sw_exit_info_2(ghcb, 0);
+
+	sev_es_wr_ghcb_msr(__pa(ghcb));
+	VMGEXIT();
+
+	sev_es_put_ghcb(&state);
+}
+
 static u64 get_jump_table_addr(void)
 {
 	struct ghcb_state state;
-- 
2.28.0




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux