Re: [PATCH v14 08/10] ptp: arm64: Enable ptp_kvm for arm64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 04 Sep 2020 10:27:42 +0100,
Jianyong Wu <jianyong.wu@xxxxxxx> wrote:
> 
> Currently, there is no mechanism to keep time sync between guest and host
> in arm64 virtualization environment. Time in guest will drift compared
> with host after boot up as they may both use third party time sources
> to correct their time respectively. The time deviation will be in order
> of milliseconds. But in some scenarios,like in cloud envirenment, we ask
> for higher time precision.
> 
> kvm ptp clock, which choose the host clock source as a reference
> clock to sync time between guest and host, has been adopted by x86
> which makes the time sync order from milliseconds to nanoseconds.
> 
> This patch enables kvm ptp clock for arm64 and improve clock sync precison
> significantly.
> 
> Test result comparisons between with kvm ptp clock and without it in arm64
> are as follows. This test derived from the result of command 'chronyc
> sources'. we should take more care of the last sample column which shows
> the offset between the local clock and the source at the last measurement.
> 
> no kvm ptp in guest:
> MS Name/IP address   Stratum Poll Reach LastRx Last sample
> ========================================================================
> ^* dns1.synet.edu.cn      2   6   377    13  +1040us[+1581us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377    21  +1040us[+1581us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377    29  +1040us[+1581us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377    37  +1040us[+1581us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377    45  +1040us[+1581us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377    53  +1040us[+1581us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377    61  +1040us[+1581us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377     4   -130us[ +796us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377    12   -130us[ +796us] +/-   21ms
> ^* dns1.synet.edu.cn      2   6   377    20   -130us[ +796us] +/-   21ms
> 
> in host:
> MS Name/IP address   Stratum Poll Reach LastRx Last sample
> ========================================================================
> ^* 120.25.115.20          2   7   377    72   -470us[ -603us] +/-   18ms
> ^* 120.25.115.20          2   7   377    92   -470us[ -603us] +/-   18ms
> ^* 120.25.115.20          2   7   377   112   -470us[ -603us] +/-   18ms
> ^* 120.25.115.20          2   7   377     2   +872ns[-6808ns] +/-   17ms
> ^* 120.25.115.20          2   7   377    22   +872ns[-6808ns] +/-   17ms
> ^* 120.25.115.20          2   7   377    43   +872ns[-6808ns] +/-   17ms
> ^* 120.25.115.20          2   7   377    63   +872ns[-6808ns] +/-   17ms
> ^* 120.25.115.20          2   7   377    83   +872ns[-6808ns] +/-   17ms
> ^* 120.25.115.20          2   7   377   103   +872ns[-6808ns] +/-   17ms
> ^* 120.25.115.20          2   7   377   123   +872ns[-6808ns] +/-   17ms
> 
> The dns1.synet.edu.cn is the network reference clock for guest and
> 120.25.115.20 is the network reference clock for host. we can't get the
> clock error between guest and host directly, but a roughly estimated value
> will be in order of hundreds of us to ms.
> 
> with kvm ptp in guest:
> chrony has been disabled in host to remove the disturb by network clock.
> 
> MS Name/IP address         Stratum Poll Reach LastRx Last sample
> ========================================================================
> * PHC0                    0   3   377     8     -7ns[   +1ns] +/-    3ns
> * PHC0                    0   3   377     8     +1ns[  +16ns] +/-    3ns
> * PHC0                    0   3   377     6     -4ns[   -0ns] +/-    6ns
> * PHC0                    0   3   377     6     -8ns[  -12ns] +/-    5ns
> * PHC0                    0   3   377     5     +2ns[   +4ns] +/-    4ns
> * PHC0                    0   3   377    13     +2ns[   +4ns] +/-    4ns
> * PHC0                    0   3   377    12     -4ns[   -6ns] +/-    4ns
> * PHC0                    0   3   377    11     -8ns[  -11ns] +/-    6ns
> * PHC0                    0   3   377    10    -14ns[  -20ns] +/-    4ns
> * PHC0                    0   3   377     8     +4ns[   +5ns] +/-    4ns
> 
> The PHC0 is the ptp clock which choose the host clock as its source
> clock. So we can see that the clock difference between host and guest
> is in order of ns.
> 
> Signed-off-by: Jianyong Wu <jianyong.wu@xxxxxxx>
> ---
>  drivers/clocksource/arm_arch_timer.c | 24 +++++++++++++
>  drivers/ptp/Kconfig                  |  2 +-
>  drivers/ptp/ptp_kvm_arm64.c          | 53 ++++++++++++++++++++++++++++
>  3 files changed, 78 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/ptp/ptp_kvm_arm64.c
> 
> diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
> index d55acffb0b90..aaf286e90092 100644
> --- a/drivers/clocksource/arm_arch_timer.c
> +++ b/drivers/clocksource/arm_arch_timer.c
> @@ -1650,3 +1650,27 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
>  }
>  TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
>  #endif
> +
> +#if IS_ENABLED(CONFIG_PTP_1588_CLOCK_KVM)
> +#include <linux/arm-smccc.h>
> +int kvm_arch_ptp_get_crosststamp(unsigned long *cycle, struct timespec64 *ts,
> +			      struct clocksource **cs)
> +{
> +	struct arm_smccc_res hvc_res;
> +	ktime_t ktime;
> +
> +	/* Currently, linux guest will always use the virtual counter */
> +	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
> +			     ARM_PTP_VIRT_COUNTER, &hvc_res);
> +	if ((long long)(hvc_res.a0) < 0)
> +		return -EOPNOTSUPP;
> +
> +	ktime = (long long)hvc_res.a0;
> +	*ts = ktime_to_timespec64(ktime);
> +	*cycle = (long long)hvc_res.a1;
> +	*cs = &clocksource_counter;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(kvm_arch_ptp_get_crosststamp);
> +#endif
> diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
> index 942f72d8151d..127e96f14f89 100644
> --- a/drivers/ptp/Kconfig
> +++ b/drivers/ptp/Kconfig
> @@ -106,7 +106,7 @@ config PTP_1588_CLOCK_PCH
>  config PTP_1588_CLOCK_KVM
>  	tristate "KVM virtual PTP clock"
>  	depends on PTP_1588_CLOCK
> -	depends on KVM_GUEST && X86
> +	depends on KVM_GUEST && X86 || ARM64 && ARM_ARCH_TIMER && ARM_PSCI_FW
>  	default y
>  	help
>  	  This driver adds support for using kvm infrastructure as a PTP
> diff --git a/drivers/ptp/ptp_kvm_arm64.c b/drivers/ptp/ptp_kvm_arm64.c
> new file mode 100644
> index 000000000000..961abed93dfd
> --- /dev/null
> +++ b/drivers/ptp/ptp_kvm_arm64.c
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + *  Virtual PTP 1588 clock for use with KVM guests
> + *  Copyright (C) 2019 ARM Ltd.
> + *  All Rights Reserved
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/err.h>
> +#include <asm/hypervisor.h>
> +#include <linux/module.h>
> +#include <linux/psci.h>
> +#include <linux/arm-smccc.h>
> +#include <linux/timecounter.h>
> +#include <linux/sched/clock.h>
> +#include <asm/arch_timer.h>
> +
> +int kvm_arch_ptp_init(void)
> +{
> +	struct arm_smccc_res hvc_res;
> +
> +	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID,
> +			     &hvc_res);
> +	if (!(hvc_res.a0 | BIT(ARM_SMCCC_KVM_FUNC_KVM_PTP)))
> +		return -EOPNOTSUPP;
> +
> +	return 0;

What happens if the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID function
isn't implemented (on an old kernel or a non-KVM hypervisor)? The
expected behaviour is that a0 will contain SMCCC_RET_NOT_SUPPORTED,
which is -1. The result is that this function always returns
"supported". Not an acceptable behaviour.

> +}
> +
> +int kvm_arch_ptp_get_clock_generic(struct timespec64 *ts,
> +				   struct arm_smccc_res *hvc_res)

Why isn't this static?

> +{
> +	ktime_t ktime;
> +
> +	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
> +			     hvc_res);
> +	if ((long long)(hvc_res->a0) < 0)
> +		return -EOPNOTSUPP;

Really? What if the cycle counter is a full 64 bit value, as it is
*mandated* on ARMv8.6? It means that the counter is now invalid for
half the lifetime of the system. Not acceptable either.

> +
> +	ktime = (long long)hvc_res->a0;
> +	*ts = ktime_to_timespec64(ktime);
> +
> +	return 0;
> +}
> +
> +int kvm_arch_ptp_get_clock(struct timespec64 *ts)
> +{
> +	struct arm_smccc_res hvc_res;
> +
> +	kvm_arch_ptp_get_clock_generic(ts, &hvc_res);
> +
> +	return 0;
> +}
> -- 
> 2.17.1
> 
> 

It is now obvious that the API between kernel and hypervisor is pretty
busted, and it goes beyond the 32bit support. I wish you paid more
attention to this kind of detail.

	M.

-- 
Without deviation from the norm, progress is not possible.



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux