On Wed, Aug 26, 2020 at 07:46:34PM +0200, Guennadi Liakhovetski wrote: > virtio_rpmsg_bus.c keeps RPMsg protocol structure declarations and > common defines like the ones, needed for name-space announcements, > internal. Move them to common headers instead. > > Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@xxxxxxxxxxxxxxx> https://www.spinics.net/lists/kvm/msg222766.html > --- > drivers/rpmsg/virtio_rpmsg_bus.c | 78 +----------------------------- > include/linux/virtio_rpmsg.h | 83 ++++++++++++++++++++++++++++++++ > include/uapi/linux/rpmsg.h | 3 ++ > 3 files changed, 88 insertions(+), 76 deletions(-) > create mode 100644 include/linux/virtio_rpmsg.h > > diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c > index 9006fc7f73d0..9d5dd3f0a648 100644 > --- a/drivers/rpmsg/virtio_rpmsg_bus.c > +++ b/drivers/rpmsg/virtio_rpmsg_bus.c > @@ -26,7 +26,9 @@ > #include <linux/virtio_byteorder.h> > #include <linux/virtio_ids.h> > #include <linux/virtio_config.h> > +#include <linux/virtio_rpmsg.h> > #include <linux/wait.h> > +#include <uapi/linux/rpmsg.h> > > #include "rpmsg_internal.h" > > @@ -70,58 +72,6 @@ struct virtproc_info { > struct rpmsg_endpoint *ns_ept; > }; > > -/* The feature bitmap for virtio rpmsg */ > -#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ > - > -/** > - * struct rpmsg_hdr - common header for all rpmsg messages > - * @src: source address > - * @dst: destination address > - * @reserved: reserved for future use > - * @len: length of payload (in bytes) > - * @flags: message flags > - * @data: @len bytes of message payload data > - * > - * Every message sent(/received) on the rpmsg bus begins with this header. > - */ > -struct rpmsg_hdr { > - __virtio32 src; > - __virtio32 dst; > - __virtio32 reserved; > - __virtio16 len; > - __virtio16 flags; > - u8 data[]; > -} __packed; > - > -/** > - * struct rpmsg_ns_msg - dynamic name service announcement message > - * @name: name of remote service that is published > - * @addr: address of remote service that is published > - * @flags: indicates whether service is created or destroyed > - * > - * This message is sent across to publish a new service, or announce > - * about its removal. When we receive these messages, an appropriate > - * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe() > - * or ->remove() handler of the appropriate rpmsg driver will be invoked > - * (if/as-soon-as one is registered). > - */ > -struct rpmsg_ns_msg { > - char name[RPMSG_NAME_SIZE]; > - __virtio32 addr; > - __virtio32 flags; > -} __packed; > - > -/** > - * enum rpmsg_ns_flags - dynamic name service announcement flags > - * > - * @RPMSG_NS_CREATE: a new remote service was just created > - * @RPMSG_NS_DESTROY: a known remote service was just destroyed > - */ > -enum rpmsg_ns_flags { > - RPMSG_NS_CREATE = 0, > - RPMSG_NS_DESTROY = 1, > -}; > - > /** > * @vrp: the remote processor this channel belongs to > */ > @@ -134,27 +84,6 @@ struct virtio_rpmsg_channel { > #define to_virtio_rpmsg_channel(_rpdev) \ > container_of(_rpdev, struct virtio_rpmsg_channel, rpdev) > > -/* > - * We're allocating buffers of 512 bytes each for communications. The > - * number of buffers will be computed from the number of buffers supported > - * by the vring, upto a maximum of 512 buffers (256 in each direction). > - * > - * Each buffer will have 16 bytes for the msg header and 496 bytes for > - * the payload. > - * > - * This will utilize a maximum total space of 256KB for the buffers. > - * > - * We might also want to add support for user-provided buffers in time. > - * This will allow bigger buffer size flexibility, and can also be used > - * to achieve zero-copy messaging. > - * > - * Note that these numbers are purely a decision of this driver - we > - * can change this without changing anything in the firmware of the remote > - * processor. > - */ > -#define MAX_RPMSG_NUM_BUFS (512) > -#define MAX_RPMSG_BUF_SIZE (512) > - > /* > * Local addresses are dynamically allocated on-demand. > * We do not dynamically assign addresses from the low 1024 range, > @@ -162,9 +91,6 @@ struct virtio_rpmsg_channel { > */ > #define RPMSG_RESERVED_ADDRESSES (1024) > > -/* Address 53 is reserved for advertising remote services */ > -#define RPMSG_NS_ADDR (53) > - > static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept); > static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len); > static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, > diff --git a/include/linux/virtio_rpmsg.h b/include/linux/virtio_rpmsg.h > new file mode 100644 > index 000000000000..fcb523831e73 > --- /dev/null > +++ b/include/linux/virtio_rpmsg.h > @@ -0,0 +1,83 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef _LINUX_VIRTIO_RPMSG_H > +#define _LINUX_VIRTIO_RPMSG_H > + > +#include <linux/mod_devicetable.h> > +#include <linux/types.h> > +#include <linux/virtio_types.h> > + > +/** > + * struct rpmsg_hdr - common header for all rpmsg messages > + * @src: source address > + * @dst: destination address > + * @reserved: reserved for future use > + * @len: length of payload (in bytes) > + * @flags: message flags > + * @data: @len bytes of message payload data > + * > + * Every message sent(/received) on the rpmsg bus begins with this header. > + */ > +struct rpmsg_hdr { > + __virtio32 src; > + __virtio32 dst; > + __virtio32 reserved; > + __virtio16 len; > + __virtio16 flags; > + u8 data[]; > +} __packed; > + > +/** > + * struct rpmsg_ns_msg - dynamic name service announcement message > + * @name: name of remote service that is published > + * @addr: address of remote service that is published > + * @flags: indicates whether service is created or destroyed > + * > + * This message is sent across to publish a new service, or announce > + * about its removal. When we receive these messages, an appropriate > + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe() > + * or ->remove() handler of the appropriate rpmsg driver will be invoked > + * (if/as-soon-as one is registered). > + */ > +struct rpmsg_ns_msg { > + char name[RPMSG_NAME_SIZE]; > + __virtio32 addr; > + __virtio32 flags; > +} __packed; > + > +/** > + * enum rpmsg_ns_flags - dynamic name service announcement flags > + * > + * @RPMSG_NS_CREATE: a new remote service was just created > + * @RPMSG_NS_DESTROY: a known remote service was just destroyed > + */ > +enum rpmsg_ns_flags { > + RPMSG_NS_CREATE = 0, > + RPMSG_NS_DESTROY = 1, > +}; > + > +/* > + * We're allocating buffers of 512 bytes each for communications. The > + * number of buffers will be computed from the number of buffers supported > + * by the vring, upto a maximum of 512 buffers (256 in each direction). > + * > + * Each buffer will have 16 bytes for the msg header and 496 bytes for > + * the payload. > + * > + * This will utilize a maximum total space of 256KB for the buffers. > + * > + * We might also want to add support for user-provided buffers in time. > + * This will allow bigger buffer size flexibility, and can also be used > + * to achieve zero-copy messaging. > + * > + * Note that these numbers are purely a decision of this driver - we > + * can change this without changing anything in the firmware of the remote > + * processor. > + */ > +#define MAX_RPMSG_NUM_BUFS 512 > +#define MAX_RPMSG_BUF_SIZE 512 > + > +/* Address 53 is reserved for advertising remote services */ > +#define RPMSG_NS_ADDR 53 > + > +#endif > diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h > index e14c6dab4223..d669c04ef289 100644 > --- a/include/uapi/linux/rpmsg.h > +++ b/include/uapi/linux/rpmsg.h > @@ -24,4 +24,7 @@ struct rpmsg_endpoint_info { > #define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info) > #define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2) > > +/* The feature bitmap for virtio rpmsg */ > +#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ > + > #endif > -- > 2.28.0 >
