Let's continue our discussion of the handling of vfio-ccw interrupts.
The initial fix [1] relied upon the interrupt path's examination of the
FSM state, and freeing all resources if it were CP_PENDING. But the
interface used by HALT/CLEAR SUBCHANNEL doesn't affect the FSM state.
Consider this sequence:
CPU 1 CPU 2
CLEAR (state=IDLE/no change)
START [2]
INTERRUPT (set state=IDLE)
INTERRUPT (set state=IDLE)
This translates to a couple of possible scenarios:
A) The START gets a cc2 because of the outstanding CLEAR, -EBUSY is
returned, resources are freed, and state remains IDLE
B) The START gets a cc0 because the CLEAR has already presented an
interrupt, and state is set to CP_PENDING
If the START gets a cc0 before the CLEAR INTERRUPT (stacked onto a
workqueue by the IRQ context) gets a chance to run, then the INTERRUPT
will release the channel program memory prematurely. If the two
operations run concurrently, then the FSM state set to CP_PROCESSING
will prevent the cp_free() from being invoked. But the io_mutex
boundary on that path will pause itself until the START completes,
and then allow the FSM to be reset to IDLE without considering the
outstanding START. Neither scenario would be considered good.
Having said all of that, in v2 Conny suggested [3] the following:
> - Detach the cp from the subchannel (or better, remove the 1:1
> relationship). By that I mean building the cp as a separately
> allocated structure (maybe embedding a kref, but that might not be
> needed), and appending it to a list after SSCH with cc=0. Discard it
> if cc!=0.
> - Remove the CP_PENDING state. The state is either IDLE after any
> successful SSCH/HSCH/CSCH, or a new state in that case. But no
> special state for SSCH.
> - A successful CSCH removes the first queued request, if any.
> - A final interrupt removes the first queued request, if any.
What I have implemented here is basically this, with a few changes:
- I don't queue cp's. Since there should only be one START in process
at a time, and HALT/CLEAR doesn't build a cp, I didn't see a pressing
need to introduce that complexity.
- Furthermore, while I initially made a separately allocated cp, adding
an alloc for a cp on each I/O AND moving the guest_cp alloc from the
probe path to the I/O path seems excessive. So I implemented a
"started" flag to the cp, set after a cc0 from the START, and examine
that on the interrupt path to determine whether cp_free() is needed.
- I opted against a "SOMETHING_PENDING" state if START/HALT/CLEAR
got a cc0, and just put the FSM back to IDLE. It becomes too unwieldy
to discern which operation an interrupt is completing, and whether
more interrupts are expected, to be worth the additional state.
- A successful CSCH doesn't do anything special, and cp_free()
is only performed on the interrupt path. Part of me wrestled with
how a HALT fits into that, but mostly it was that a cc0 on any
of the instructions indicated the "channel subsystem is signaled
to asynchronously perform the [START/HALT/CLEAR] function."
This means that an in-flight START could still receive data from the
device/subchannel, so not a good idea to release memory at that point.
Separate from all that, I added a small check of the io_work queue to
the FSM START path. Part of the problems I've seen was that an interrupt
is presented by a CPU, but not yet processed by vfio-ccw. Some of the
problems seen thus far is because of this gap, and the above changes
don't address that either. Whether this is appropriate or ridiculous
would be a welcome discussion.
Previous versions:
v2: https://lore.kernel.org/kvm/20200513142934.28788-1-farman@xxxxxxxxxxxxx/
v1: https://lore.kernel.org/kvm/20200124145455.51181-1-farman@xxxxxxxxxxxxx/
Footnotes:
[1] https://lore.kernel.org/kvm/62e87bf67b38dc8d5760586e7c96d400db854ebe.1562854091.git.alifm@xxxxxxxxxxxxx/
[2] Halil has pointed out that QEMU should prohibit this, based on the
rules set forth by the POPs. This is true, but we should not rely on
it behaving properly without addressing this scenario that is visible
today. Once I get this behaving correctly, I'll spend some time
seeing if QEMU is misbehaving somehow.
[3] https://lore.kernel.org/kvm/20200518180903.7cb21dd8.cohuck@xxxxxxxxxx/
[4] https://lore.kernel.org/kvm/a52368d3-8cec-7b99-1587-25e055228b62@xxxxxxxxxxxxx/
Eric Farman (3):
vfio-ccw: Indicate if a channel_program is started
vfio-ccw: Remove the CP_PENDING FSM state
vfio-ccw: Check workqueue before doing START
drivers/s390/cio/vfio_ccw_cp.c | 2 ++
drivers/s390/cio/vfio_ccw_cp.h | 1 +
drivers/s390/cio/vfio_ccw_drv.c | 5 +----
drivers/s390/cio/vfio_ccw_fsm.c | 32 +++++++++++++++++------------
drivers/s390/cio/vfio_ccw_ops.c | 3 +--
drivers/s390/cio/vfio_ccw_private.h | 1 -
6 files changed, 24 insertions(+), 20 deletions(-)
--
2.17.1
