Hi Palmer, On Fri, Mar 13, 2020 at 1:22 PM Anup Patel <anup.patel@xxxxxxx> wrote: > > This series adds initial KVM RISC-V support. Currently, we are able to boot > RISC-V 64bit Linux Guests with multiple VCPUs. > > Few key aspects of KVM RISC-V added by this series are: > 1. Minimal possible KVM world-switch which touches only GPRs and few CSRs. > 2. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure. > 3. KVM ONE_REG interface for VCPU register access from user-space. > 4. PLIC emulation is done in user-space. > 5. Timer and IPI emuation is done in-kernel. > 6. MMU notifiers supported. > 7. FP lazy save/restore supported. > 8. SBI v0.1 emulation for KVM Guest available. > 9. Forward unhandled SBI calls to KVM userspace. > 10. Hugepage support for Guest/VM > > Here's a brief TODO list which we will work upon after this series: > 1. SBI v0.2 emulation in-kernel > 2. SBI v0.2 hart state management emulation in-kernel > 3. In-kernel PLIC emulation > 4. ..... and more ..... > > This series can be found in riscv_kvm_v11 branch at: > https//github.com/avpatel/linux.git > > Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v2 branch > at: https//github.com/avpatel/kvmtool.git > > The QEMU RISC-V hypervisor emulation is done by Alistair and is available > in mainline/anup/riscv-hyp-ext-v0.5.3 branch at: > https://github.com/kvm-riscv/qemu.git > > To play around with KVM RISC-V, refer KVM RISC-V wiki at: > https://github.com/kvm-riscv/howto/wiki > https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-QEMU > > Changes since v10: > - Rebased patches on Linux-5.6-rc5 > - Reduce RISCV_ISA_EXT_MAX from 256 to 64 > - Separate PATCH for removing N-extension related defines > - Added comments as requested by Palmer > - Fixed HIDELEG CSR programming > > Changes since v9: > - Squash PATCH19 and PATCH20 into PATCH5 > - Squash PATCH18 into PATCH11 > - Squash PATCH17 into PATCH16 > - Added ONE_REG interface for VCPU timer in PATCH13 > - Use HTIMEDELTA for VCPU timer in PATCH13 > - Updated KVM RISC-V mailing list in MAINTAINERS entry > - Update KVM kconfig option to depend on RISCV_SBI and MMU > - Check for SBI v0.2 and SBI v0.2 RFENCE extension at boot-time > - Use SBI v0.2 RFENCE extension in VMID implementation > - Use SBI v0.2 RFENCE extension in Stage2 MMU implementation > - Use SBI v0.2 RFENCE extension in SBI implementation > - Moved to RISC-V Hypervisor v0.5 draft spec > - Updated Documentation/virt/kvm/api.txt for timer ONE_REG interface > - Rebased patches on Linux-5.5-rc3 > > Changes since v8: > - Rebased series on Linux-5.4-rc3 and Atish's SBI v0.2 patches > - Use HRTIMER_MODE_REL instead of HRTIMER_MODE_ABS in timer emulation > - Fixed kvm_riscv_stage2_map() to handle hugepages > - Added patch to forward unhandled SBI calls to user-space > - Added patch for iterative/recursive stage2 page table programming > - Added patch to remove per-CPU vsip_shadow variable > - Added patch to fix race-condition in kvm_riscv_vcpu_sync_interrupts() > > Changes since v7: > - Rebased series on Linux-5.4-rc1 and Atish's SBI v0.2 patches > - Removed PATCH1, PATCH3, and PATCH20 because these already merged > - Use kernel doc style comments for ISA bitmap functions > - Don't parse X, Y, and Z extension in riscv_fill_hwcap() because it will > be added in-future > - Mark KVM RISC-V kconfig option as EXPERIMENTAL > - Typo fix in commit description of PATCH6 of v7 series > - Use separate structs for CORE and CSR registers of ONE_REG interface > - Explicitly include asm/sbi.h in kvm/vcpu_sbi.c > - Removed implicit switch-case fall-through in kvm_riscv_vcpu_exit() > - No need to set VSSTATUS.MXR bit in kvm_riscv_vcpu_unpriv_read() > - Removed register for instruction length in kvm_riscv_vcpu_unpriv_read() > - Added defines for checking/decoding instruction length > - Added separate patch to forward unhandled SBI calls to userspace tool > > Changes since v6: > - Rebased patches on Linux-5.3-rc7 > - Added "return_handled" in struct kvm_mmio_decode to ensure that > kvm_riscv_vcpu_mmio_return() updates SEPC only once > - Removed trap_stval parameter from kvm_riscv_vcpu_unpriv_read() > - Updated git repo URL in MAINTAINERS entry > > Changes since v5: > - Renamed KVM_REG_RISCV_CONFIG_TIMEBASE register to > KVM_REG_RISCV_CONFIG_TBFREQ register in ONE_REG interface > - Update SPEC in kvm_riscv_vcpu_mmio_return() for MMIO exits > - Use switch case instead of illegal instruction opcode table for simplicity > - Improve comments in stage2_remote_tlb_flush() for a potential remote TLB > flush optimization > - Handle all unsupported SBI calls in default case of > kvm_riscv_vcpu_sbi_ecall() function > - Fixed kvm_riscv_vcpu_sync_interrupts() for software interrupts > - Improved unprivilege reads to handle traps due to Guest stage1 page table > - Added separate patch to document RISC-V specific things in > Documentation/virt/kvm/api.txt > > Changes since v4: > - Rebased patches on Linux-5.3-rc5 > - Added Paolo's Acked-by and Reviewed-by > - Updated mailing list in MAINTAINERS entry > > Changes since v3: > - Moved patch for ISA bitmap from KVM prep series to this series > - Make vsip_shadow as run-time percpu variable instead of compile-time > - Flush Guest TLBs on all Host CPUs whenever we run-out of VMIDs > > Changes since v2: > - Removed references of KVM_REQ_IRQ_PENDING from all patches > - Use kvm->srcu within in-kernel KVM run loop > - Added percpu vsip_shadow to track last value programmed in VSIP CSR > - Added comments about irqs_pending and irqs_pending_mask > - Used kvm_arch_vcpu_runnable() in-place-of kvm_riscv_vcpu_has_interrupt() > in system_opcode_insn() > - Removed unwanted smp_wmb() in kvm_riscv_stage2_vmid_update() > - Use kvm_flush_remote_tlbs() in kvm_riscv_stage2_vmid_update() > - Use READ_ONCE() in kvm_riscv_stage2_update_hgatp() for vmid > > Changes since v1: > - Fixed compile errors in building KVM RISC-V as module > - Removed unused kvm_riscv_halt_guest() and kvm_riscv_resume_guest() > - Set KVM_CAP_SYNC_MMU capability only after MMU notifiers are implemented > - Made vmid_version as unsigned long instead of atomic > - Renamed KVM_REQ_UPDATE_PGTBL to KVM_REQ_UPDATE_HGATP > - Renamed kvm_riscv_stage2_update_pgtbl() to kvm_riscv_stage2_update_hgatp() > - Configure HIDELEG and HEDELEG in kvm_arch_hardware_enable() > - Updated ONE_REG interface for CSR access to user-space > - Removed irqs_pending_lock and use atomic bitops instead > - Added separate patch for FP ONE_REG interface > - Added separate patch for updating MAINTAINERS file > > Anup Patel (16): > RISC-V: Export riscv_cpuid_to_hartid_mask() API > RISC-V: Add bitmap reprensenting ISA features common across CPUs > RISC-V: Remove N-extension related defines > RISC-V: Add hypervisor extension related CSR defines > RISC-V: Add initial skeletal KVM support > RISC-V: KVM: Implement VCPU create, init and destroy functions > RISC-V: KVM: Implement VCPU interrupts and requests handling > RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls > RISC-V: KVM: Implement VCPU world-switch > RISC-V: KVM: Handle MMIO exits for VCPU > RISC-V: KVM: Handle WFI exits for VCPU > RISC-V: KVM: Implement VMID allocator > RISC-V: KVM: Implement stage2 page table programming > RISC-V: KVM: Implement MMU notifiers > RISC-V: KVM: Document RISC-V specific parts of KVM API > RISC-V: KVM: Add MAINTAINERS entry > > Atish Patra (4): > RISC-V: KVM: Add timer functionality > RISC-V: KVM: FP lazy save/restore > RISC-V: KVM: Implement ONE REG interface for FP registers > RISC-V: KVM: Add SBI v0.1 support > > Documentation/virt/kvm/api.rst | 193 ++++- > MAINTAINERS | 11 + > arch/riscv/Kconfig | 2 + > arch/riscv/Makefile | 2 + > arch/riscv/include/asm/csr.h | 78 +- > arch/riscv/include/asm/hwcap.h | 22 + > arch/riscv/include/asm/kvm_host.h | 264 +++++++ > arch/riscv/include/asm/kvm_vcpu_timer.h | 44 ++ > arch/riscv/include/asm/pgtable-bits.h | 1 + > arch/riscv/include/uapi/asm/kvm.h | 127 +++ > arch/riscv/kernel/asm-offsets.c | 148 ++++ > arch/riscv/kernel/cpufeature.c | 83 +- > arch/riscv/kernel/smp.c | 2 + > arch/riscv/kvm/Kconfig | 34 + > arch/riscv/kvm/Makefile | 14 + > arch/riscv/kvm/main.c | 97 +++ > arch/riscv/kvm/mmu.c | 762 ++++++++++++++++++ > arch/riscv/kvm/tlb.S | 43 + > arch/riscv/kvm/vcpu.c | 997 ++++++++++++++++++++++++ > arch/riscv/kvm/vcpu_exit.c | 639 +++++++++++++++ > arch/riscv/kvm/vcpu_sbi.c | 171 ++++ > arch/riscv/kvm/vcpu_switch.S | 382 +++++++++ > arch/riscv/kvm/vcpu_timer.c | 225 ++++++ > arch/riscv/kvm/vm.c | 86 ++ > arch/riscv/kvm/vmid.c | 120 +++ > drivers/clocksource/timer-riscv.c | 8 + > include/clocksource/timer-riscv.h | 16 + > include/uapi/linux/kvm.h | 8 + > 28 files changed, 4564 insertions(+), 15 deletions(-) > create mode 100644 arch/riscv/include/asm/kvm_host.h > create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h > create mode 100644 arch/riscv/include/uapi/asm/kvm.h > create mode 100644 arch/riscv/kvm/Kconfig > create mode 100644 arch/riscv/kvm/Makefile > create mode 100644 arch/riscv/kvm/main.c > create mode 100644 arch/riscv/kvm/mmu.c > create mode 100644 arch/riscv/kvm/tlb.S > create mode 100644 arch/riscv/kvm/vcpu.c > create mode 100644 arch/riscv/kvm/vcpu_exit.c > create mode 100644 arch/riscv/kvm/vcpu_sbi.c > create mode 100644 arch/riscv/kvm/vcpu_switch.S > create mode 100644 arch/riscv/kvm/vcpu_timer.c > create mode 100644 arch/riscv/kvm/vm.c > create mode 100644 arch/riscv/kvm/vmid.c > create mode 100644 include/clocksource/timer-riscv.h > > -- > 2.17.1 > Can you please consider PATCH1, PATCH2, and PATCH3 of this series for Linux-5.7-rcX ?? Regards, Anup
