There is no point in accessing the HW when writing to any of the
ISPENDR/ICPENDR registers from userspace, as only the guest should
be allowed to change the HW state.
Introduce new userspace-specific accessors that deal solely with
the virtual state. Note that the API differs from that of GICv3,
where userspace exclusively uses ISPENDR to set the state. Too
bad we can't reuse it.
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
---
virt/kvm/arm/vgic/vgic-mmio-v2.c | 6 +++--
virt/kvm/arm/vgic/vgic-mmio.c | 41 ++++++++++++++++++++++++++++++++
virt/kvm/arm/vgic/vgic-mmio.h | 8 +++++++
3 files changed, 53 insertions(+), 2 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v2.c b/virt/kvm/arm/vgic/vgic-mmio-v2.c
index f51c6e939c76..a016f07adc28 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v2.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v2.c
@@ -417,10 +417,12 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = {
NULL, vgic_uaccess_write_cenable, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_SET,
- vgic_mmio_read_pending, vgic_mmio_write_spending, NULL, NULL, 1,
+ vgic_mmio_read_pending, vgic_mmio_write_spending,
+ NULL, vgic_uaccess_write_spending, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_CLEAR,
- vgic_mmio_read_pending, vgic_mmio_write_cpending, NULL, NULL, 1,
+ vgic_mmio_read_pending, vgic_mmio_write_cpending,
+ NULL, vgic_uaccess_write_cpending, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_SET,
vgic_mmio_read_active, vgic_mmio_write_sactive,
diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c
index 6e30034d1464..f1927ae02d2e 100644
--- a/virt/kvm/arm/vgic/vgic-mmio.c
+++ b/virt/kvm/arm/vgic/vgic-mmio.c
@@ -321,6 +321,27 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
}
}
+int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len,
+ unsigned long val)
+{
+ u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+ int i;
+ unsigned long flags;
+
+ for_each_set_bit(i, &val, len * 8) {
+ struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+ raw_spin_lock_irqsave(&irq->irq_lock, flags);
+ irq->pending_latch = true;
+ vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+
+ vgic_put_irq(vcpu->kvm, irq);
+ }
+
+ return 0;
+}
+
/* Must be called with irq->irq_lock held */
static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
bool is_uaccess)
@@ -390,6 +411,26 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
}
}
+int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len,
+ unsigned long val)
+{
+ u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+ int i;
+ unsigned long flags;
+
+ for_each_set_bit(i, &val, len * 8) {
+ struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+ raw_spin_lock_irqsave(&irq->irq_lock, flags);
+ irq->pending_latch = false;
+ raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+ vgic_put_irq(vcpu->kvm, irq);
+ }
+
+ return 0;
+}
/*
* If we are fiddling with an IRQ's active state, we have to make sure the IRQ
diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h
index 327d0a6938e4..fefcca2b14dc 100644
--- a/virt/kvm/arm/vgic/vgic-mmio.h
+++ b/virt/kvm/arm/vgic/vgic-mmio.h
@@ -157,6 +157,14 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len,
unsigned long val);
+int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len,
+ unsigned long val);
+
+int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len,
+ unsigned long val);
+
unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len);
--
2.26.1
